GDC - Enclosures/Shelves

GDC - SpectraComm 1001
The SpectraComm 1001 is a compact stand-alone enclosure used to deploy a single width SpectraComm in non-NEBS applications. The enclosure is typically used at remote customer premises that require management from master devices, in-band SNMP management, or TEAM management from a central site. Connections to all external devices are made via standard connectors at the card front panel and the enclosure rear panel. The rear connector panel provides integrated TIA/EIA-232F, V.35, or EIA-530 interfaces that are used as needed by the installed SpectraComm blade. The SC1001 enclosure provides local test and configuration connectivity via a rear panel craft port for those SpectraComm blades that support a front or rear panel craft interface. The SC1001 is AC-powered using an internal power supply and a detachable wallmount transformer assembly.

Low profile, compact design ensures low emissions
The SC 1001 AC enclosure uses a 115 VAC wall-mount power transformer or a 220 VAC desktop transformer for isolation from hazardous voltages
6 watts, max total power dissipation
Easy installation and removal of product card without tools and without powering down the enclosure
Accepts a wide variety of single-slot SpectraComm or UAS product cards
Rear connector panel provides three 8-pin modular jacks (two line interface ports and one craft port) and one DB25F (DTE) connector
Supports TIA/EIA-232F, V.35, RS-530 or X.21 interfaces as required by installed product

D A T A S H E E T

SpectraComm 1001 Standalone Enclosure 115V AC $225.00 Quantity

GDC - SpectraComm 2000
The SpectraComm 2000 is a NEBS and EMI-compliant shelf that offers maximum port density in a compact 1RU (1.75” high) footprint - ideal for central offices, remote offices, and cell sites. One or two single-width SpectraComm, or UAS blades can plug into the SC 2000 shelf, with integrated TIA/EIA-232F, V.35, or EIA-530 interfaces, network line, and craft connectivity provided for each capable device.

The SpectraComm 2000 is a low density, rack-mountable shelf designed for the space limitations of remote cabinets or Central Offices. When deployed with a SpectraComm IP router and a SpectraComm 9-port Ethernet switch, the SC2000 shelf is certified as environmentally hardened for use in huts, CEVs, and other extreme environments. The shelf is equipped with single or independent dual power supplies which employ +24 VDC or -48 VDC power from cell sites and central or remote offices. With dual power, the “hot-swappable” power supplies provide load sharing and redundant power and can be replaced without interrupting service or powering down the shelf. An optional external AC “all range” Power Adapter supports 100 to 240 VAC power sources.

Can be installed in standard 19-, 23-, and 26-inch racks and cabinets
NEBS Certified for use in interior Telco environments (GR-63-CORE, Level III, GR-1089-CORE) and in hardened Environments
Accommodates one or two single-slot plug-in blades for wide band and narrow band applications
Accepts any single-slot blade from GDC’s SpectraComm, and UAS families of network access products

D A T A S H E E T

SpectraComm 2000 Shelf (Non-Red) $535.50 Quantity

SpectraComm 2000 (Red) $670.50 Quantity

GDC - SpectraComm 5000
SpectraComm 5000 shelves are the high density rackmount solution for service provider and enterprise environments, deploying up to 16 SpectraComm or UAS blades in each 4RU (7” high) NEBS and EMI-compliant shelf. Blades plug into network interface, DTE and management bus connectors at the shelf backplane to support DSX-1, V.35, EIA-530, V.24, EIA/TIA-232, BNC, and HSSI interfaces for a total connectivity solution, with integral network management built in. This “SpectraCommonality” ensures that service interfaces, transmission product types and speeds, and business equipment connections meet your networking requirements. SC 5000 shelves are AC- or DC-powered, with dedicated slots for one or two plug-in power supply modules. One supply supports a fully populated shelf of up to 16 blades. For critical, "always on" applications, a second supply provides load sharing and redundant power.

The SC 5000 high density shelf is certified complaint to the Bellcore NEBS Level III standard in North America. The modular backplane consists of a network interface for analog or digital service connectivity (Zone 1), a bus interface for power distribution and transport of diagnostic and control signals (Zone 2), and a DTE interface for V.24/EIA/TIA-232-E or V.35 connectivity to terminal devices (Zone 3). Twelve models of the SC 5000 shelf provide a complete offering of backplane configurations and power solutions.

Can be installed in standard 19-, 23-, and 26-inch racks and cabinets
NEBS Certified for use in interior Telco environments (GR-63-CORE, Level III, GR-1089-CORE) and in hardened Environments
Accommodates up to 16 front-loading plug-in blades, with two dedicated slots for power supply modules
Accepts any single or multi-slot device from GDC’s SpectraComm, Innovx, or UAS families of blades
Blades can be installed or extracted without powering down the shelf (hot-swappable)
Plug-in AC power supply modules available are 100/117 VAC (47-63 Hz) or 220/240 VAC (47-63 Hz)
Plug-in DC power supply modules available are: -48 and -60 VDC (station battery designed to meet Conducted Emissions requirements in Bellcore 1089)
Can be configured as a dual shelf (up to 32 blades)
Supports optional SpectraComm Manager (SCM), the shelf’s SNMP proxy agent

D A T A S H E E T

SpectraComm 5000 Shelf Model 1 117V $1,075.50 Quantity

SpectraComm 5000 Shelf Model 10 -48V $1,525.50 Quantity

SpectraComm 5000 Shelf Model 12, -48VDC $1,615.50 Quantity