**Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
**
Try one complete HSC-style drawing task before you buy. Students draw the front, top and right views of a locating bracket from its pictorial, in third-angle projection to AS 1100.
The complete HSC Engineering Studies drawing revision resource: 20 exam-style sheets covering six drawing skills, with full answers. It runs to 53 pages and 107 marks, about 3 hours of work at HSC exam pace.
Skills covered:
Orthogonal views: sheets 01–04
Sections: full, half and offset sections, ribs, webs and threads (sheets 05, 06, 07, 09)
Assemblies and fasteners: sheets 08, 10, 11
Isometric drawing: sheets 12–14
Developments: including triangulation (sheets 15–17)
AS 1100: dimensioning, reading a drawing and finding missing lines (sheets 18–20)
Each sheet comes:
with a 5 mm grid for practice, and plain like the exam
with large full-size drawing areas and marked starting points
with an answer key showing the complete drawing and a mark-by-mark guide
The front page lists the HSC years in which each skill was tested, so you can target revision.
It suits teachers setting practice or homework, and students preparing for trials or the HSC. Print on A4 at 100%.
All parts are original and were modelled in 3D, so every view, hidden line and section is exact. This is HSC-style practice, not past-paper questions, and it is not affiliated with NESA.
Saves £3 compared with buying the six packs separately.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Four sheets on turning a part into accurate orthogonal views:
01 Front view with hidden detail
02 Three views from a pictorial
03 Complete the right view, projecting with a 45° line
04 Complete the top view, with a hole on an inclined face
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Three sheets on isometric drawing from orthogonal views, each on an isometric dot grid with a marked starting corner:
12 Curves and holes
13 Inclined faces
14 Cylinders, including a flanged bush
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Three sheet-metal development tasks, each with a marked seam line and numbered fold lines:
15 Development of a truncated rectangular duct
16 Half development of a cut cylinder
17 Transition piece by triangulation, with true lengths
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Three sheets on drawing assemblies:
08 Sectioned assembly with a bolt, nut, washer and countersunk screw, with adjacent parts hatched in different directions and fasteners left unsectioned
10 Bolt, washer and nut, drawn across corners
11 Assembly drawing of a clevis joint from an exploded pictorial, with a parts list
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Three sheets on reading and checking drawings:
18 Fully dimension a link plate, using diameters, radii, chamfers and an auxiliary dimension
19 Name and explain 8 numbered features on a sectioned drawing
20 Find the five missing lines in a three-view drawing
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.
Four sheets on sectional views to AS 1100:
05 Full section, with counterbores and an oil hole
06 Half section with webs and an external thread
07 Offset section, with a tapped hole
09 Full section with a rib, which is not hatched when cut lengthwise
Every pack includes: a front page with contents, marks and timing • each sheet with a 5 mm grid and plain like the exam • large full-size drawing areas with starting points marked • a full answer key with a mark-by-mark guide • AS 1100 conventions, third-angle projection, A4.
All parts are original and modelled in 3D, so every answer is exact. HSC-style practice written to match the drawing skills tested in recent HSC Engineering Studies exams. Not past-paper questions. Sheet numbers match the Drawing Revision Kit.
Written for the NSW Stage 6 Engineering Studies syllabus (Year 11–12 HSC): engineering drawing and AS 1100 drawing standards.