Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
AQA Physics New GCSE Spec (Paper 2 Topic 1 - exams 2018) – Forces and their interactions (4.5)
All lessons to cover the TRILOGY lessons of topic 5 (paper 2, topic 1) – Forces and their interactions (4.5), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. All higher and foundation aspects covered and clearly outlined with tasks suited to ability to go with.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.5.1.1 - Scalar and vector quantities (P5.1 lesson)
4.5.1.2 - Contact and non-contact forces (P5.1 lesson)
4.5.6.1.1 - Distance and displacement (P5.1 lesson)
4.5.6.1.2 - Speed (in part) (P5.1 lesson)
4.5.1.4 - Resultant forces (P5.2 lesson)
4.5.2 – Work done and energy transfer (P5.3 lesson)
4.5.1.3 – Gravity (P5.4 lesson)
4.5.3 - Forces and elasticity (P5.5 lesson)
Required practical 6 - investigate the relationship between force and extension for a spring. (P5.5 lesson)
4.5.6.1.2 – Speed (P5.11 lesson)
4.5.6.1.3 – Velocity (P5.11 lesson)
4.5.6.1.4 - The distance-time relationship (P5.11 lesson)
4.5.6.1.5 – Acceleration (P5.12 lesson)
4.5.6.2.1 - Newton’s First Law (P5.13 lesson)
4.5.6.2.2 - Newton’s Second Law (P5.13 lesson)
4.5.6.2.3 - Newton’s Third Law (P5.13 lesson)
Required practical 7 - Investigate the effect of varying the force on the acceleration of an object of constant mass, and the effect of varying the mass of an object on the acceleration produced by a constant force. (P5.13 lesson)
4.5.6.3.1 - Stopping distance (P5.14 lesson)
4.5.6.3.2 - Reaction time (P5.14 lesson)
4.5.6.3.3 - Factors affecting braking distance 1 (P5.14 lesson)
4.5.6.3.4 - Factors affecting braking distance 2 (P5.14 lesson)
4.5.7.1 - Momentum is a property of moving objects (P5.15 lesson)
4.5.7.2 - Conservation of momentum (P5.15 lesson)
To buy all of these lessons separately from my shop would cost £32.
AQA Biology New GCSE Spec (Paper 2 Topic 3 - exams 2018) – Ecology (4.7)
All lessons to cover the SEPARATE Biology course of topic 7 (paper 2, topic 3) – Ecology (4.7), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.7.1.1 - Communities (B7.1 lesson)
4.7.1.2 - Abiotic factors(B7.1 lesson)
4.7.1.3 - Biotic factors (B7.1 lesson)
4.7.1.4 – Adaptations (B7.2 lesson)
4.7.2.1 - Levels of organisation (feeding relationships + predator - prey cycles) (B7.3 lesson)
4.7.2.1- Levels of organisation (required practical 9 - population sizes) (B7.4 lesson)
4.7.2.2 - How materials are cycled (B7.5 lesson)
4.7.2.3 - Decomposition (Biology only) (B7.6 Lesson)
Required practical 10 - Investigate the effect of temperature on the rate of decay of fresh milk by measuring pH change
4.7.3.2 - Waste management (B7.9 lesson)
4.7.3.1 - Biodiversity (B7.7 lesson)
4.7.3.6 - Maintaining Biodiversity (B7.7 lesson)
4.7.2.4 - Impact of environmental change (Biology only) (B7.8 lesson)
4.7.3.2 - Waste management (B7.9 lesson)
4.7.3.3 - Land use (B7.9 lesson)
4.7.3.4 - Deforestation (B7.9 lesson)
4.7.3.5 - Global warming (B7.9 lesson)
4.7.4.1 - Trophic levels (Biology only) (B7.10 lesson)
4.7.4.2 - Pyramids of biomass (Biology only) (B7.10 lesson)
4.7.4.3 - Transfer of biomass (Biology only) (B7.10 lesson)
4.7.5.1 - Factors affecting food security (Biology only) (B7.11 lesson)
4.7.5.2 - Farming techniques (Biology only) (B7.11 lesson)
4.7.5.3 - Sustainable fisheries (Biology only) (B7.11 lesson)
4.7.5.4 - Role of biotechnology (Biology only) (B7.11 lesson)
To buy all of these lessons separately from my shop would cost £33.
AQA Biology New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Inheritance, variation + evolution (4.6)
All lessons to cover the TRILOGY lessons of topic 6 (paper 2, topic 2) – Inheritance, variation + evolution (4.6), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.6.1.1 - sexual and asexual reproduction (B6.1 lesson)
4.6.1.2 - Meiosis (B6.1 lesson)
4.6.1.4 - DNA and the genome (B6.3 lesson)
4.6.1.6 - Genetic inheritance (B6.5 lesson)
4.6.1.7 - Inherited disorders (B6.6 lesson)
4.6.1.8 - Sex determination (B6.5 lesson)
4.6.2.1 - Variation (B6.9 lesson)
4.6.2.2 - Evolution (B6.10 lesson)
4.6.2.3 - Selective breeding (B6.11 lesson)
4.6.2.4 - Genetic engineering (B6.11 lesson)
4.6.3.4 - Evidence for evolution (B6.16 lesson)
4.6.3.5 - Fossils (B6.16 lesson)
4.6.3.6 - Extinction (B6.16 lesson)
4.6.3.7 - Resistant bacteria (B6.17 lesson)
4.6.4.1 - classification of living organisms (B6.18 lesson)
To buy all of these lessons separately from my shop would cost £30.
QA Physics New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Waves (4.6)
All lessons to cover the both the TRILOGY and TRIPLE lessons of topic 6 (paper 2, topic 2) – Waves (4.6), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson)
4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson)
4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson)
4.6.1.3 - Reflection of waves (physics only) (P6.3 lesson)
Required practical 9: Investigate the reflection of light by different types of surface and the refraction of light by different substances. (physics only) (P6.3 lesson)
4.6.1.4 - Sound waves (physics only) (P6.4 lesson)
4.6.1.5 - Waves for detection and exploration (P6.4 lesson)
4.6.2.1 - Types of electromagnetic waves (P6.6 lesson)
4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson)
4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson)
Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface.
4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson)
4.6.2.5 - Lenses (P6.9 lesson)
4.6.2.6 - Visible Light (physics only) (P6.10 lesson)
4.6.3.1 - Emission and absorption of infrared radiation (P6.11 lesson)
4.6.3.2 - Perfect black bodies and radiation (P6.11 lesson)
To buy all of these lessons separately from my shop would cost £30.
AQA Physics New GCSE Spec (Paper 2 Topic 1 - exams 2018) – Forces and their interactions (4.5)
All lessons to cover the both the combined and physics only route of topic 5 (paper 2, topic 1) – Forces and their interactions (4.5), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. All higher and foundation aspects covered and clearly outlined with tasks suited to ability to go with.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.5.1.1 - Scalar and vector quantities (P5.1 lesson)
4.5.1.2 - Contact and non-contact forces (P5.1 lesson)
4.5.6.1.1 - Distance and displacement (P5.1 lesson)
4.5.6.1.2 - Speed (in part) (P5.1 lesson)
4.5.1.4 - Resultant forces (P5.2 lesson)
4.5.2 – Work done and energy transfer (P5.3 lesson)
4.5.1.3 – Gravity (P5.4 lesson)
4.5.3 - Forces and elasticity (P5.5 lesson)
Required practical 6 - investigate the relationship between force and extension for a spring. (P5.5 lesson)
4.5.4 - Moments, levers and gears (P5.6 lesson TRIPLE ONLY)
4.5.5.1.1 - Pressure in a fluid 1 (P5.7 lesson TRIPLE ONLY)
4.5.5.1.2 - Pressure in a fluid 2 (HT Only)(P5.7 lesson TRIPLE ONLY)
4.5.5.2 - Atmospheric pressure (P5.8 TRIPLE ONLY)
4.5.6.1.2 – Speed (P5.9 lesson)
4.5.6.1.3 – Velocity (P5.9 lesson)
4.5.6.1.4 - The distance-time relationship (P5.9 lesson)
4.5.6.1.5 – Acceleration (P5.10 lesson)
4.5.6.2.1 - Newton’s First Law (P5.11 lesson)
4.5.6.2.2 - Newton’s Second Law (P5.11 lesson)
4.5.6.2.3 - Newton’s Third Law (P5.11 lesson)
Required practical 7 - Investigate the effect of varying the force on the acceleration of an object of constant mass, and the effect of varying the mass of an object on the acceleration produced by a constant force. (P5.11 lesson)
4.5.6.3.1 - Stopping distance (P5.12 lesson)
4.5.6.3.2 - Reaction time (P5.12 lesson)
4.5.6.3.3 - Factors affecting braking distance 1 (P5.12 lesson)
4.5.6.3.4 - Factors affecting braking distance 2 (P5.12 lesson)
4.5.7.1 - Momentum is a property of moving objects (P5.13 lesson)
4.5.7.2 - Conservation of momentum (P5.13 lesson)
4.5.7.3 - Changes in momentum (P5.14 lesson TRIPLE ONLY)
To buy all of these lessons separately from my shop would cost £44.
AQA Biology New GCSE Spec (Paper 2 Topic 2 - exams 2018) – Inheritance, variation + evolution (4.6)
All lessons to cover the TRILOGY and TRIPLE lessons of topic 6 (paper 2, topic 2) – Inheritance, variation + evolution (4.6), from the new spec (exams 2018). .
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in:
Trilogy specification points and lessons:
4.6.1.1 - sexual and asexual reproduction (B6.1 lesson)
4.6.1.3 - Advantages and disadvantages of sexual and asexual reproduction (biology only) (B6.1 lesson)
4.6.1.2 - Meiosis (B6.1 lesson)
4.6.1.4 - DNA and the genome (B6.2 lesson)
4.6.1.5 - DNA Structure (bioloy only) (B6.3 lesson)
4.6.1.6 - Genetic inheritance (B6.4 lesson)
4.6.1.7 - Inherited disorders (B6.5 lesson)
4.6.1.8 - Sex determination (B6.5 lesson)
4.6.2.1 - Variation (B6.6 lesson)
4.6.2.2 - Evolution (B6.7 lesson)
4.6.2.3 - Selective breeding (B6.8 lesson)
4.6.2.4 - Genetic engineering (B6.8 lesson)
4.6.2.5 - Cloning (biology only) (B6.9 lesson)
4.6.3.1 - Theory of evolution (biology only) (B6.10 lesson)
4.6.3.2 - Speciation (biology only) (B6.11 lesson)
4.6.3.3 - The understanding of genetics (biology only) (B6.12 lesson)
4.6.3.4 - Evidence for evolution (B6.13 lesson)
4.6.3.5 - Fossils (B6.13 lesson)
4.6.3.6 - Extinction (B6.13 lesson)
4.6.3.7 - Resistant bacteria (B6.14 lesson)
4.6.4.1 - classification of living organisms (B6.15 lesson)
To buy all of these lessons separately from my shop would cost £45.
AQA Physics New GCSE Spec
Entire resources to cover all of the trilogy/combined content in paper 2 of the new GCSE specifications.
All trilogy/combined lessons for all 3 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover the combined ‘trilogy’ science route lessons
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Paper 2 Topic 1 (4.5 - Forces and their interactions)
4.5.1.1 - Scalar and vector quantities (P5.1 lesson)
4.5.1.2 - Contact and non-contact forces (P5.1 lesson)
4.5.6.1.1 - Distance and displacement (P5.1 lesson)
4.5.6.1.2 - Speed (in part) (P5.1 lesson)
4.5.1.4 - Resultant forces (P5.2 lesson)
4.5.2 – Work done and energy transfer (P5.3 lesson)
4.5.1.3 – Gravity (P5.4 lesson)
4.5.3 - Forces and elasticity (P5.5 lesson)
Required practical 6 - investigate the relationship between force and extension for a spring. (P5.5 lesson)
4.5.6.1.2 – Speed (P5.11 lesson)
4.5.6.1.3 – Velocity (P5.11 lesson)
4.5.6.1.4 - The distance-time relationship (P5.11 lesson)
4.5.6.1.5 – Acceleration (P5.12 lesson)
4.5.6.2.1 - Newton’s First Law (P5.13 lesson)
4.5.6.2.2 - Newton’s Second Law (P5.13 lesson)
4.5.6.2.3 - Newton’s Third Law (P5.13 lesson)
Required practical 7 - Investigate the effect of varying the force on the acceleration of an object of constant mass, and the effect of varying the mass of an object on the acceleration produced by a constant force. (P5.13 lesson)
4.5.6.3.1 - Stopping distance (P5.14 lesson)
4.5.6.3.2 - Reaction time (P5.14 lesson)
4.5.6.3.3 - Factors affecting braking distance 1 (P5.14 lesson)
4.5.6.3.4 - Factors affecting braking distance 2 (P5.14 lesson)
4.5.7.1 - Momentum is a property of moving objects (P5.15 lesson)
4.5.7.2 - Conservation of momentum (P5.15 lesson)
Paper 2 topic 2 (4.6 - Waves)
4.6.1.1 - Transverse and longitudinal waves (P6.1 lesson)
4.6.1.2 - Properties of waves (wave calculations) (P6.1 lesson)
4.6.1.2 - Properties of waves - required practical - make observations to identify the suitability of apparatus to measure the frequency, wavelength and speed of waves in a ripple tank and waves in a solid and take appropriate measurements. (P6.2 lesson)
4.6.2.1 - Types of electromagnetic waves (P6.6 lesson)
4.6.2.2 - Properties of electromagnetic waves 1 (P6.7a lesson)
4.6.2.3 - Properties of electromagnetic waves 2(P6.7a lesson)
Required practical (P6.7b lesson) - investigate how the amount of infrared radiation absorbed or radiated by a surface depends on the nature of that surface.
4.6.2.4 - Uses and applications of electromagnetic waves (P6.8 lesson)
Paper 2 topic 3 (4.7 - Magnetism and electromagnetism)
4.7.1.1 - Poles of a magnet (P7.1 lesson)
4.7.1.2 - Magnetic fields (P7.1 lesson)
4.7.2.1 – Electromagnetism (P7.2 lesson)
4.7.2.2 - Fleming’s left-hand rule (HT only) (P7.3 lesson)
4.7.2.3 - Electric motors (HT only) (P7.3 lesson)
AQA Biology New GCSE Spec
Entire resources to cover all of the trilogy/combined content in paper 2 of the new GCSE specifications.
All trilogy/combined lessons for all 3 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover the combined ‘trilogy’ science route lessons
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Paper 2 Topic 1 (4.5 - homeostasis and response)
4.5.1 - Homeostasis (B5.1 lesson)
4.5.3.2 - Control of blood glucose concentration (B5.1 lesson)
4.5.2.1 - Structure and function (B5.2 lesson)
Required practical 7 - plan and carry out an investigation into the effect of a factor on human reaction time (B5.2 lesson)
4.5.3.1 - Human endocrine system (B5.6 lesson)
4.5.3.4 - Hormones in human reproduction (B5.10 lesson)
4.5.3.5 - Contraception (B5.11 lesson)
4.5.3.6 - The use of hormones to treat infertility (HT only) (B5.12 lesson)
4.5.3.7 - Negative feedback (HT only) (B5.13 lesson)
Paper 2 topic 2 (4.6 - Inheritance, variation and evolution)
4.6.1.1 - sexual and asexual reproduction (B6.1 lesson)
4.6.1.2 - Meiosis (B6.1 lesson)
4.6.1.4 - DNA and the genome (B6.3 lesson)
4.6.1.6 - Genetic inheritance (B6.5 lesson)
4.6.1.7 - Inherited disorders (B6.6 lesson)
4.6.1.8 - Sex determination (B6.5 lesson)
4.6.2.1 - Variation (B6.9 lesson)
4.6.2.2 - Evolution (B6.10 lesson)
4.6.2.3 - Selective breeding (B6.11 lesson)
4.6.2.4 - Genetic engineering (B6.11 lesson)
4.6.3.4 - Evidence for evolution (B6.16 lesson)
4.6.3.5 - Fossils (B6.16 lesson)
4.6.3.6 - Extinction (B6.16 lesson)
4.6.3.7 - Resistant bacteria (B6.17 lesson)
4.6.4.1 - classification of living organisms (B6.18 lesson)
Paper 2 topic 3 (4.7 - Ecology
4.7.1.1 - Communities (B7.1 lesson)
4.7.1.2 - Abiotic factors(B7.1 lesson)
4.7.1.3 - Biotic factors (B7.1 lesson)
4.7.1.4 – Adaptations (B7.2 lesson)
4.7.2.1 - Levels of organisation (feeding relationships + predator - prey cycles) (B7.3 lesson)
4.7.2.1- Levels of organisation (required practical 9 - population sizes) (B7.4 lesson)
4.7.2.2 - How materials are cycled (B7.5 lesson)
4.7.3.1 - Biodiversity (B7.7 lesson)
4.7.3.6 - Maintaining Biodiversity (B7.7 lesson)
4.7.3.2 - Waste management (B7.9 lesson)
4.7.3.3 - Land use (B7.9 lesson)
4.7.3.4 - Deforestation (B7.9 lesson)
4.7.3.5 - Global warming (B7.9 lesson)
AQA Chemistry New GCSE Spec
Entire resources to cover all content in paper 2 of the new GCSE specifications.
All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Paper 2, Topic 1 - Rate and extent of chemical change
Trilogy and triple specification points and lessons:
4.6.1.1 - Calculating rates of reaction (C6.1 lesson)
4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson)
4.6.1.3 - Collision theory and activation energy (C6.2 lesson)
REQUIRED PRACTICAL 5 - C6.3 lesson
4.6.1.4 - Catalysts (C6.4 lesson)
4.6.2.1 - Reversible reactions (C6.5 lesson)
4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson)
4.6.2.3 - Equilibrium (C6.6)
4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson)
4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson)
4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson)
4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)
Paper 2, Topic 2 - Organic chemistry
Trilogy and triple specification points and lessons:
4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson)
4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson)
4.7.1.3 –Properties of hydrocarbons (C7.2 lesson)
4.7.1.4 – Cracking and alkenes (C7.3 lesson)
Chemistry Triple science specification points and lessons:
4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson)
4.7.2.2 – Reactions of alkenes (C7.4 lesson)
4.7.2.3 – Alcohols (C7.5 lesson)
4.7.2.4 – Carboxylic acids (C7.6 lesson)
4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson)
4.7.3.1 – Addition polymerisation (C7.8 lesson)
4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson)
4.7.3.3 – Amino acids (HT) (C7.10 lesson)
4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)
Paper 2, Topic 3 - Chemical analysis
Trilogy and Chemistry only specification points:
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
Chemistry Only specification points:
4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy
4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide
4.8.3.3-5 (TRIPLE) - Identifying anions
Required practical 6 + 7 covered in lessons.
Paper 2, Topic 4 - Chemistry in our atmosphere
Trilogy and chemistry only specification points covered:
4.9.1.1 - The proportions of different gases in the atmosphere
4.9.1.2 - The Earth's early atmosphere
4.9.1.3 - How oxygen increased
4.9.1.4 - How carbon dioxide decreased
4.9.2.1 - Greenhouse gases
4.9.2.2 - Human activities and greenhouse gases
4.9.2.3 - Global climate change
4.9.2.4 - The carbon footprint and its reduction
4.9.3.1 - Atmospheric pollutants from fuels
4.9.3.2 - Properties and effects of atmospheric pollutants
Paper 2, Topic 5 - The Earth's resources
Trilogy and separate specification points:
4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson)
4.10.1.2 - Potable water (C10.2 lesson)
Required practical 8 (C10.2 lesson)
4.10.1.3 - Waste water treatment (C10.3 lesson)
4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson)
4.10.2.1 - Life cycle assessment (C10.5 lesson)
4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson)
TRIPLE Chemistry only specification points:
4.10.3.1 - Corrosion and its prevention (C10.7 lesson)
4.10.3.2 - Alloys as useful materials (C10.8 lesson)
4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson)
4.10.4.1 - The Haber process (C10.10 lesson)
4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)
AQA Chemistry New GCSE Spec
Entire resources to cover all content in paper 1 of the new GCSE specifications.
All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Topic 1 - Atomic structure and the periodic table:
4.1.1.1 - atoms, elements and compounds
4.1.1.2 - Mixtures
4.1.1.3 - Scientific models of the atom
4.1.1.4 - relative electrical charges of subatomic particles
4.1.1.5 - size and mass of atoms
4.1.1.6 - electronic structure
4.1.2.1 - The periodic table
4.1.2.2 - development of the periodic table
4.1.2.3 - metals and non-metals
4.1.2.4 - Group 0
4.1.2.5 - Group 1
4.1.2.6 - Group 7
Chemistry Triple science lessons:
4.1.3.1 + 2 - Transition metals and their properties
Topic 2 - Bonding structure and the properties of matter:
4.2.1.1 – Chemical bonds
4.2.1.2 – Ionic bonding
4.2.1.3 – Ionic compounds
4.2.1.4 – Covalent bonding
4.2.1.5 – Metallic bonding
4.2.2.1 – Three states of matter
4.2.2.2 – State symbols
4.2.2.3 – Properties of ionic compounds
4.2.2.4 – Simple covalent substances
4.2.2.5 – Polymers
4.2.2.6 – Giant covalent substances
4.2.2.7 – Properties of metals and alloys
4.2.2.8 – Metals as conductors
4.2.3.1 – Diamond
4.2.3.2 – Graphite
4.2.3.3 – Graphene and fullerenes
Chemistry Triple science lessons:
4.2.4.1 – Sizes of particles and their properties
4.2.4.2 – Uses of nanoparticles
Topic 3 - Quantitative Chemistry:
4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson)
4.3.1.2 – Relative formula mass (C3.2 lesson)
4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson)
4.3.2.1 – Moles (Higher tier) (C3.3 lesson)
4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson)
4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson)
4.3.2.4 – Limiting reactants (HT) (C3.5 lesson)
4.3.2.5 – Concentration of solutions (C3.6 lesson)
Chemistry Triple science specification points and lessons:
4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson)
4.3.3.1 – Percentage yield (C3.8 lesson)
4.3.3.2 – Atom economy (C3.9 lesson)
4.3.5 – Molar volume of gases (HT) (C3.10 lesson)
Topic 4 - Chemical changes
4.4.1.1 - Metal Oxides (C4.1 lesson)
4.4.1.2 - The reactivity series (C4.1 lesson)
4.4.1.3 - Extraction of metals and reduction (C4.2 lesson)
4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson)
4.4.2.1 - Reactions of acids with metals (C4.4 lesson)
4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson)
4.4.2.3 - Soluble salts (C4.5 lesson)
4.4.2.4 - The pH scale and neutralisation (C4.6)
4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2)
4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson)
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
4.4.3.4 - Required practical 3 (C4.11 lesson)
Topic 5 - Energy Changes:
4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4)
4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task)
4.5.1.2 – Reaction profiles (C5.2 lesson)
4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson)
Chemistry Triple science specification points and lessons:
4.5.2.1 – cells and batteries (C5.3 lesson)
4.5.2.2 - Fuel Cells (C5.4 lesson)
AQA Chemistry New GCSE Spec
Entire resources to cover all content in the new GCSE specifications.
All lessons for all 10 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Please visit my shop and read the reviews on the individual topics to gain an idea as to how popular these resources have proved. A great time saver and a great help to anyone planning for this course. Would also be a great help for anybody teaching outside of specialism, as the power points guide you through each section of the course and tell a story throughout the course.
All specification points are covered in these lessons, below is a break down of all content:
Paper 1, Topic 1 - Atomic structure and the periodic table:
4.1.1.1 - atoms, elements and compounds
4.1.1.2 - Mixtures
4.1.1.3 - Scientific models of the atom
4.1.1.4 - relative electrical charges of subatomic particles
4.1.1.5 - size and mass of atoms
4.1.1.6 - electronic structure
4.1.2.1 - The periodic table
4.1.2.2 - development of the periodic table
4.1.2.3 - metals and non-metals
4.1.2.4 - Group 0
4.1.2.5 - Group 1
4.1.2.6 - Group 7
Chemistry Triple science lessons:
4.1.3.1 + 2 - Transition metals and their properties
Paper 1, Topic 2 - Bonding structure and the properties of matter:
4.2.1.1 – Chemical bonds
4.2.1.2 – Ionic bonding
4.2.1.3 – Ionic compounds
4.2.1.4 – Covalent bonding
4.2.1.5 – Metallic bonding
4.2.2.1 – Three states of matter
4.2.2.2 – State symbols
4.2.2.3 – Properties of ionic compounds
4.2.2.4 – Simple covalent substances
4.2.2.5 – Polymers
4.2.2.6 – Giant covalent substances
4.2.2.7 – Properties of metals and alloys
4.2.2.8 – Metals as conductors
4.2.3.1 – Diamond
4.2.3.2 – Graphite
4.2.3.3 – Graphene and fullerenes
Chemistry Triple science lessons:
4.2.4.1 – Sizes of particles and their properties
4.2.4.2 – Uses of nanoparticles
Paper 1, Topic 3 - Quantitative Chemistry:
4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson)
4.3.1.2 – Relative formula mass (C3.2 lesson)
4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson)
4.3.2.1 – Moles (Higher tier) (C3.3 lesson)
4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson)
4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson)
4.3.2.4 – Limiting reactants (HT) (C3.5 lesson)
4.3.2.5 – Concentration of solutions (C3.6 lesson)
Chemistry Triple science specification points and lessons:
4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson)
4.3.3.1 – Percentage yield (C3.8 lesson)
4.3.3.2 – Atom economy (C3.9 lesson)
4.3.5 – Molar volume of gases (HT) (C3.10 lesson)
Paper 1, Topic 4 - Chemical changes
4.4.1.1 - Metal Oxides (C4.1 lesson)
4.4.1.2 - The reactivity series (C4.1 lesson)
4.4.1.3 - Extraction of metals and reduction (C4.2 lesson)
4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson)
4.4.2.1 - Reactions of acids with metals (C4.4 lesson)
4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson)
4.4.2.3 - Soluble salts (C4.5 lesson)
4.4.2.4 - The pH scale and neutralisation (C4.6)
4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2)
4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson)
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
4.4.3.4 - Required practical 3 (C4.11 lesson)
Paper 1, Topic 5 - Energy Changes:
4.5.1.1 – Energy transfer during exothermic and endothermic reactions (C5.1 lesson. Includes required practical 4)
4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task)
4.5.1.2 – Reaction profiles (C5.2 lesson)
4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson)
Chemistry Triple science specification points and lessons:
4.5.2.1 – cells and batteries (C5.3 lesson)
4.5.2.2 - Fuel Cells (C5.4 lesson)
Paper 2, Topic 1 - Rate and extent of chemical change
Trilogy and triple specification points and lessons:
4.6.1.1 - Calculating rates of reaction (C6.1 lesson)
4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson)
4.6.1.3 - Collision theory and activation energy (C6.2 lesson)
REQUIRED PRACTICAL 5 - C6.3 lesson
4.6.1.4 - Catalysts (C6.4 lesson)
4.6.2.1 - Reversible reactions (C6.5 lesson)
4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson)
4.6.2.3 - Equilibrium (C6.6)
4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson)
4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson)
4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson)
4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)
Paper 2, Topic 2 - Organic chemistry
Trilogy and triple specification points and lessons:
4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson)
4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson)
4.7.1.3 –Properties of hydrocarbons (C7.2 lesson)
4.7.1.4 – Cracking and alkenes (C7.3 lesson)
Chemistry Triple science specification points and lessons:
4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson)
4.7.2.2 – Reactions of alkenes (C7.4 lesson)
4.7.2.3 – Alcohols (C7.5 lesson)
4.7.2.4 – Carboxylic acids (C7.6 lesson)
4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson)
4.7.3.1 – Addition polymerisation (C7.8 lesson)
4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson)
4.7.3.3 – Amino acids (HT) (C7.10 lesson)
4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)
Paper 2, Topic 3 - Chemical analysis
Trilogy and Chemistry only specification points:
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
Chemistry Only specification points:
4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy
4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide
4.8.3.3-5 (TRIPLE) - Identifying anions
Required practical 6 + 7 covered in lessons.
Paper 2, Topic 4 - Chemistry in our atmosphere
Trilogy and chemistry only specification points covered:
4.9.1.1 - The proportions of different gases in the atmosphere
4.9.1.2 - The Earth's early atmosphere
4.9.1.3 - How oxygen increased
4.9.1.4 - How carbon dioxide decreased
4.9.2.1 - Greenhouse gases
4.9.2.2 - Human activities and greenhouse gases
4.9.2.3 - Global climate change
4.9.2.4 - The carbon footprint and its reduction
4.9.3.1 - Atmospheric pollutants from fuels
4.9.3.2 - Properties and effects of atmospheric pollutants
Paper 2, Topic 5 - The Earth's resources
Trilogy and separate specification points:
4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson)
4.10.1.2 - Potable water (C10.2 lesson)
Required practical 8 (C10.2 lesson)
4.10.1.3 - Waste water treatment (C10.3 lesson)
4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson)
4.10.2.1 - Life cycle assessment (C10.5 lesson)
4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson)
TRIPLE Chemistry only specification points:
4.10.3.1 - Corrosion and its prevention (C10.7 lesson)
4.10.3.2 - Alloys as useful materials (C10.8 lesson)
4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson)
4.10.4.1 - The Haber process (C10.10 lesson)
4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)
