Hero image

Attainment in Education's Shop

Average Rating3.13
(based on 8 reviews)

We provide high quality resources that help pupils to improve their results in the STEM subjects. Our team includes award winning teachers and former senior and principal examiners from across a range of examination bodies. We understand that raising attainment and supporting the progress of learners is key to developing outstanding learning and teaching.

61Uploads

29k+Views

3k+Downloads

We provide high quality resources that help pupils to improve their results in the STEM subjects. Our team includes award winning teachers and former senior and principal examiners from across a range of examination bodies. We understand that raising attainment and supporting the progress of learners is key to developing outstanding learning and teaching.
Introduction to the 6Rs
AttainmentinEducationAttainmentinEducation

Introduction to the 6Rs

(0)
Sustainability is a crucial part of Design and Technology and one of the topics at GCSE where pupils frequently make mistakes or show an incorrect understanding. This 20 page PowerPoint resource has been written by a former senior examiner for one of the three main examination boards and has been tried and tested with students in the classroom. It introduces the 6Rs (rethink, reduce, refuse, repair, reuse, recycle), explains to learners what each means and shows how each can be used. It also introduces activities to help students to remember the 6Rs and demonstrate the knowledge needed for the examination. It is suitable for the both the current and new GCSE D&T courses where sustainability and/or the 6Rs is covered by the specification. What teachers have said about this resource: 'Thanks for this resource - well made and very useable for my students.' - SG
Dealing with Exam Stress
AttainmentinEducationAttainmentinEducation

Dealing with Exam Stress

(1)
This is a PowerPoint resource to guide pupils in understanding and taking practical steps to reduce the amount of stress that they might feel when preparing for and sitting their GCSE exams. Exam periods can be very stressful times for pupils, particularly when sitting their GCSEs. This resource has been written by an experienced teacher with a proven track record of achieving outstanding exam results to help pupils to reduce the stresses that they may feel during this key period, and guide them in how to channel their energies positively. This resource is suitable for any subject where examinations are a key component of the course, or can be used as part of a wider PSHE scheme of work.
Key Stage 3 Design and Technology Cover Pack
AttainmentinEducationAttainmentinEducation

Key Stage 3 Design and Technology Cover Pack

(0)
Setting cover work can be a time consuming and difficult process that often has to be completed at short notice. That's why we created our Key Stage 3 D&T Cover Pack! This is a pack of resources designed to help teachers and department leaders save time when setting cover work for Key Stage 3 Design and Technology classes. It contains a mixture of one-off cover lesson design tasks, literacy and exam style worksheets and mini-projects for covering longer term absence. This resource does not include Food Preparation, Cooking and Nutrition. A separate cover pack will be made available shortly for this subject. Included in this pack: 15 pupil activity sheets ideal for setting as one-off cover lessons. These are mainly design based activities but also cover other elements of the design process. 3 five lesson mini-projects with PowerPoint presentations and worksheets needed for delivery. Ideal for covering longer term absence. 30 worksheets focussing primarily on literacy and exam skills within D&T. Ideal as short tasks within cover lessons, or for when pupils have completed other set cover work. Teachers' notes explaining best use of the resources.
Electronics Theory - Systems Approach
AttainmentinEducationAttainmentinEducation

Electronics Theory - Systems Approach

(0)
This is a 12 slide PowerPoint presentation prepared by an experienced, award winning teacher and former senior examiner to assist in the delivery of the systems approach knowledge as part of the Engineering and/or D&T GCSE 9-1 specifications. It could also be used as a training resource to support colleagues unfamiliar with or new to this area of the specifications. Included is an overview of what makes a system, examples of input, process, driver and output devices, the use of block diagrams and feedback. Four exam style questions are presented so that students can test their knowledge and understanding.
Key Stage 3 D&T Marking Grids
AttainmentinEducationAttainmentinEducation

Key Stage 3 D&T Marking Grids

(0)
This resource is a set of time saving marking grids for providing formative feedback to students and recording improvements in their performance. It is linked directly to the 2014 Key Stage 3 Design and Technology National Curriculum. It has been used successfully in the classroom as presented, but can be adapted and modified to suit individual school and departmental requirements. It has been created by an experienced middle leader and advisor for the subject. A marking grid is provided for each bullet point of the programme of study, split into the strands of Design, Make, Evaluate, Technical Knowledge and Cooking and Nutrition. The grids also include criteria for literacy and presentation skills within Design and Technology. In addition to the main marking grids two types of student self assessment sheets have been provided as a bonus resource, one of each type for each strand of the curriculum. Included in this Resource: Instructions on how to use the resource and an example of how it can be used. A marking grid for each bullet point of the KS3 programme of study (19 in total). Student self assessment sheets - two types for each strand of the programme of study (10 in total).
Starter or Plenary Slides for NEW GCSE Food Preparation and Nutrition - Food Safety
AttainmentinEducationAttainmentinEducation

Starter or Plenary Slides for NEW GCSE Food Preparation and Nutrition - Food Safety

(0)
Create outstanding customised starters and plenaries for your Food Preparation and Nutrition lessons in minutes! This resource contains over 60 slides. Its objective is to support literacy in the new GCSE in Food Preparation and Nutrition, by focusing on key terms in food safety. The slides include picture recognition, cloze questions and anagrams. Simply copy and paste the appropriate slides for your own lessons. This is suitable for use to support teaching of the new GCSE in Food Preparation and Nutrition or at Key Stage 3. It has been written with direct reference to the AQA specification, but due to common content could be easily adapted for courses from other awarding bodies.
KS3 D&T Word Searches
AttainmentinEducationAttainmentinEducation

KS3 D&T Word Searches

(0)
This pack contains series of five different word search based worksheets mapped directly to each section of the new Design and Technology national curriculum (Design, Make, Evaluate, Technical Knowledge, Cooking and Nutrition). It is designed to support literacy skills within KS3 D&T. Follow up questions are presented for each word search which ask learners to state the meaning of key words, thus getting learners to both spell and understand key words in the new curriculum effectively. Each worksheet comes with its own answer sheet giving the solution to the worksheet and example answers to the follow up questions on each sheet. These worksheets can be printed for use as quick lesson starters or plenaries. They can also be set as homework activities to reinforce key words learnt in lessons. The answer sheets can be used by teachers to mark pupil responses, or used by pupils as a peer assessment activity. Included in this Resource: One worksheet for each of the five diffierent strands in the new D&T national curriculum, each with a word search and follow up questions asking learners to state the definition of the key words. An answer sheet for each work sheet. Introductory notes explaining how to use the resource.
Evidence Tables for Inspections
AttainmentinEducationAttainmentinEducation

Evidence Tables for Inspections

(0)
This document is designed for use by Headteachers and members of the SLT. It presents, in a revised format, the grade descriptors published by Ofsted. It is intended to prepare for an inspection and to save preparation time when an inspection occurs. If the tables within this document, or individual items from the tables are regularly discussed at SLT meetings, it can also assist in maintaining the focus on improvement. The aims of this document are, once completed: To allow schools to identify where there are gaps or weaknesses in the evidence base that need to be addressed. To help inspectors identify and locate evidence to justify a grade awarded. The grade descriptors are listed in tabular form, with separate tables for ‘Good’ and ‘Outstanding’ for each of the main inspection areas.
Starter or Plenary Slides for NEW GCSE D&T (AQA) - Designing and Design Issues
AttainmentinEducationAttainmentinEducation

Starter or Plenary Slides for NEW GCSE D&T (AQA) - Designing and Design Issues

(0)
Create outstanding customised starters and plenaries for your Design and Technology lessons in minutes! This resource contains over 80 slides. Its objective is to support literacy and numeracy in the new GCSE D&T, by focusing on key terms in designing and design issues. The slides include picture recognition, cloze questions, anagrams and numeracy problems. Simply copy and paste the appropriate slides for your own lessons. This is suitable for use to support teaching of the new GCSE in D&T or at Key Stage 3. It has been written with direct reference to the AQA specification, which has been approved for first teaching in September 2017.
Starter or Plenary Slides for NEW GCSE D&T (AQA) - Manufacturing Tools,  Equipment and Processes
AttainmentinEducationAttainmentinEducation

Starter or Plenary Slides for NEW GCSE D&T (AQA) - Manufacturing Tools, Equipment and Processes

(0)
Create outstanding customised starters and plenaries for your Design and Technology lessons in minutes! This resource contains over 100 slides. Its objective is to support literacy in the new GCSE D&T, by focusing on key terms in manufacturing tools, equipment and processes. The slides include picture recognition, cloze questions and anagrams. Simply copy and paste the appropriate slides for your own lessons. This is suitable for use to support teaching of the new GCSE in D&T or at Key Stage 3. It has been written with direct reference to the AQA specification, which has been approved for first teaching in September 2017.
A-Level Design & Technology Assessment for Learning Pack (Written for the OCR Specification)
AttainmentinEducationAttainmentinEducation

A-Level Design & Technology Assessment for Learning Pack (Written for the OCR Specification)

(0)
This resource is designed to support Assessment for Learning in OCR A-Level Design and Technology. This resource, written by a former senior examiner, presents an approach that has been proven in classrooms to raise attainment. It breaks down the NEA criteria into a series of easy to understand statements in student friendly language. It supports both self assessment and peer assessment, thus enabling students to identify their own areas for improvement. It can also be used to support teachers in understanding and applying the assessment criteria for A-Level D&T. It has been developed from an approach used for GCSE D&T courses; this was developed by a former senior examiner and applied in his own classroom with great success, typically improving value added by more than one grade. Included in this pack: Teachers notes, including an introduction to using Assessment for Learning (AfL) and how to use the resource. Tables listing the specific requirements to achieve the marks in each section of the NEA, written in ‘student-speak’, alongside tick boxes for self and peer assessment. An editable version of the tables to allow for teacher customisation. The ‘tick-box’ tables can be used either individually or as a booklet by students, to support improvements in their own attainment.
Starter or Plenary Slides for NEW GCSE D&T (AQA) - New and Emerging Technologies
AttainmentinEducationAttainmentinEducation

Starter or Plenary Slides for NEW GCSE D&T (AQA) - New and Emerging Technologies

(1)
Create outstanding customised starters and plenaries for your Design and Technology lessons in minutes! This resource contains 60 slides. Its objective is to support literacy in the new GCSE D&T, by focusing on key terms in new and emerging technologies. The slides include picture recognition, cloze questions and anagrams. Simply copy and paste the appropriate slides for your own lessons. This is suitable for use to support teaching of the new GCSE in D&T or at Key Stage 3. It has been written with direct reference to the AQA specification, which has been approved for first teaching in September 2017.
Reinforcing the Key Terms in ACCESS FM
AttainmentinEducationAttainmentinEducation

Reinforcing the Key Terms in ACCESS FM

(0)
A series of 19 worksheets designed to support literacy in Design & Technology, focused around the use of ACCESS FM for product analysis. This resource comprises of: A pdf document containing a series of worksheets. A PowerPoint presentation, giving the answers to the worksheets. The worksheets are designed to support literacy in technology, through the use of key terms, the development of correct recall and spelling. The worksheets range in difficulty from simple, such as wordlinks or missing letters, to more complicated, such as codebreakers or crosswords. For some worksheets there is a differentiated version, where the possible answers are shown in a box below the puzzle. These versions could be used to provide additional support to lower-ability learners.
Reinforcing the Key Terms in the Design Process
AttainmentinEducationAttainmentinEducation

Reinforcing the Key Terms in the Design Process

(0)
A series of 16 worksheets designed to support literacy in Design & Technology, focused around the design process. This resource comprises of: A pdf document containing a series of worksheets. A PowerPoint presentation, giving the answers to the worksheets. The worksheets are designed to support literacy in technology, through the use of key terms, the development of correct recall and spelling. The worksheets range in difficulty from simple, such as wordlinks or missing letters, to more complicated, such as codebreakers or crosswords. For some worksheets there is a differentiated version, where the possible answers are shown in a box below the puzzle. These versions could be used to provide additional support to lower-ability learners.
    D&T Super Starter and Perfect Plenary Cards (Digital)
AttainmentinEducationAttainmentinEducation

D&T Super Starter and Perfect Plenary Cards (Digital)

(1)
These cards provide easy to follow instructions for 39 outstanding starters and plenaries. That's more than one great idea to try each week of the academic year! All have been proven to work in the classroom across Key Stage 3 and Key Stage 4. This digital version of the cards is presented as printable A4 PDFs of both the front and back of the A6 cards (4 cards per A4 page) - ready for laminating and guillotining. This resource includes: 39 outstanding starter and plenary activities (four per A4 page) as digital files for printing and/or laminating to create a set of cards (front and back of cards provided). Word templates to assist in the delivery of some activities which may require worksheets for pupils/students to use.
Numeracy Based Brain Teasers
AttainmentinEducationAttainmentinEducation

Numeracy Based Brain Teasers

(0)
A fantastic collection of more than 50 numeracy based brain teasers and puzzles. Great for use as engaging lesson starters in Maths. The brain teasers are ranked by challenge level. They range from some suitable for key stage 3 through to problems that will present a challenge to GCSE and AS/A2 students.
   Independent Research Task - Composite Materials
AttainmentinEducationAttainmentinEducation

Independent Research Task - Composite Materials

(0)
This is an independent research task for learners to build and consolidate their knowledge of composite materials, using the aviation industry as a theme. It can be set as a homework or class based activity, or a mixture of both. Supporting the main task sheet is a short test that can be used to assess what the students have learnt at the end of the task. This resource is suitable for supporting learning in Engineering, Product Design and Resistant Materials at key stage 4. In addition to developing subject knowledge the resource is also designed to help learners improve their independent learning skills and examination technique. Included in this resource: Suggestions for use. Main research activity sheet/handout. 15 minute test set in the style of a short examination. Mark scheme for the test.
KS3 Level Descriptor Statements Derived from GCSE 9-1 Engineering
AttainmentinEducationAttainmentinEducation

KS3 Level Descriptor Statements Derived from GCSE 9-1 Engineering

(0)
Schools use attainment criteria to facilitate the assessment of progress. However, the Secretary of State for education has disapplied the attainment criteria previously used for Key Stage 3 Design & Technology. One of the weaknesses of the previous attainment criteria was that there was no direct link to progression at Key Stage 4/GCSE Engineering. This disapplication gives the opportunity to adopt new assessment criteria, which more accurately reflect the development of skills that will be assessed in GCSE Engineering. The following descriptor statements are based on the NEA assessment criteria in the new GCSE 9-1 Engineering specification. They were developed by a group of examiners for use in their own classrooms. They were not prepared by, and have not been approved by, any exam board.
Key Stage 3 Design & Technology Progression Matrix
AttainmentinEducationAttainmentinEducation

Key Stage 3 Design & Technology Progression Matrix

(1)
This is an Excel spreadsheet based tool to assist Design & Technology departments in ensuring that they are addressing all of the requirements of the National Curriculum 2014 Programme of Study. Every project or significant activity in Key Stage 3 Design & Technology should be evaluated to determine which areas of the National Curriculum 2014 Programme of Study (PoS) are being addressed. Across any Key Stage as a whole, learners should have the opportunity to address every area - this will normally be achieved by addressing different requirements across several different projects. This resource can be used to identify areas where action is needed to improve how well the PoS is addressed.
KS3 Level Descriptor Statements Derived from GCSE 9-1 Design & Technology
AttainmentinEducationAttainmentinEducation

KS3 Level Descriptor Statements Derived from GCSE 9-1 Design & Technology

(1)
Schools use attainment criteria to facilitate the assessment of progress. However, the Secretary of State for education has disapplied the attainment criteria previously used for Key Stage 3 Design & Technology. This disapplication gives the opportunity to adopt new assessment criteria, which more accurately reflect the development of skills that will be assessed in GCSE 9-1 Design & Technology. The following descriptor statements are based on the NEA assessment criteria in the new GCSE 9-1 Design & Technology specification. They were developed by a group of examiners for use in their own classrooms. They were not prepared by, and have not been approved by, any exam board.