English Literature overview poster/revision card. I have had these printed out and displayed around the English department. Pupils can clearly see key themes and characters. Great Exam preperation. I have 3 available (Romeo and Juliet, An Inspector Calls and Jekyll and Hyde)

English Literature overview poster/revision card. I have had these printed out and displayed around the English department. Pupils can clearly see key themes and characters. Great Exam preperation. I have 3 available (Romeo and Juliet, An Inspector Calls and Jekyll and Hyde)

This is a 4 week project I run with my Sixth Form Design students, it develops their ability to sketch and design by utilising a range of communication techniques. This presentation requires students to have a basic understanding of sketching.

I am developing a full range of theory lessons to support the new AQA design technology GCSE 9-1. There are 30 lessons that are taught one a week throughout Y10. Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. To support the theory lessons I have uploaded, please download my pupil tracker sheet. As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering. All content is fully branded and is graphically consistent. Please check out my other resources and give feedback if you find my resources helpful. If there are any missing video links, please contact me and I will send.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Series of 9 lessons that deliver training for the examined Unit 3 as part of the new BTEC Tech Award Engineering. The lessons cover isometric and orthographic training as well as SpaceClaim (CAD) training (Unit 1B). They are designed to give students the skills required to complete the Examination they will sit, as well as support the work required to complete Unit 1B (design and produce a prototype). Part of the lessons focus on redrawing products they have previously manufactured (a small passive amplifier, also available in my shop) but could be easily swapped out for an alternative project of your choosing. Includes teaching PowerPoint, Student Booklet, Lesson Plans and Learning Objectives/Starters/Plenaries. Please also see my other lessons that support this qualification, I have the whole course uploaded onto my shop.

I have included the SOW that I have developed for the delivery of the new BTEC Tech Award for Engineering. i have a full set of resources to support this course in my TES shop.

I have produced a set of 40 starter/bell tasks that are to be used during the delivery of Unit 3, responding to an Engineering Brief. the aim is to refresh the theory content that has been delivered earlier in the course. I have produced a full set of resources to support this course, including a Scheme of Work, theory lessons, assignment briefs and exam/skills development available in my TES shop.

I have produced a lesson aimed at improving pupils performance during the new 9-1 AQA DT exam. It is hoped that it will help build confidence prior to the summer exam. Pupils will need answer questions from the SAM 2 paper then analyse other pupils responces. It is designed to not only test theory knowledge but dig down to help develop pupils understanding of what to wrote to get marks in an exam. Please also see my Exam Techniques resources that are specifically based around the AQA DT specification.

I have produced a lesson aimed at improving pupils performance during the new 9-1 AQA DT exam. It is hoped that it will help build confidence prior to the summer exam. Pupils will need to select materials and manufacturing processes for a range of products and be able to justify their selection. Please also see my Exam Techniques resources that are specifically based around the AQA DT specification.

I have produced a lesson aimed at improving pupils performance during Section C of the new 9-1 AQA DT exam. I have based it heavily on the structure of the SAM that was released. It is hoped that it will help build pupils confidence prior to the summer exam. I have based this question on a car booster seat, however it would be easy to modify it for any number of other products. I have not included a marking scheme for this. Please also see my Exam Techniques resources that are specifically based around the AQA DT specification.

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation