Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic.
Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
AQA C1.3 (new spec) - Models of the atom (with developments). A fully resourced lesson about atoms, elements and compounds to be used when teaching the New specification of AQA C1.
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C2.6 (new spec - 4.2.6 - paper 1, topic 2 new spec) - Properties of giant covalent substances
A fully resourced lesson about the properties of giant covalent substances to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter).
Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.
AQA C2.13 (new spec - 4.2.13 - paper 1, topic 2 new spec) - Nanoparticles (for triple science)
A fully resourced lesson about nanoparticles and their properties (for triple science) to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter).
Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.
AQA A level chemistry - Physical chemistry
Topic 1 - Atomic structure, lesson 3 - Electron configuration and ionisation energies
Specification points covered =
3.1.1.3 - Electron configuration
Fully resourced lesson covering the following with information and tasks:
Electron configurations of atoms and ions up to Z = 36 in terms of shells and sub-shells (orbitals) s, p and d.
Ionisation energies.
Students should be able to:
• define first ionisation energy
• write equations for first and successive ionisation energies
• explain how first and successive ionisation energies in Period 3 (Na–Ar) and in Group 2 (Be–Ba) give evidence for electron configuration in sub-shells and in shells.
Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA C2.2 - Ionic bonding. A full lesson about ionic bonding to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C8.6 (new spec - Paper 2, topic 3) - Identifying negative ions
A fully resourced lesson about identifying negative ions (halides; sulphates; carbonates) to be used when teaching the New specification of AQA C8 (Chemical analysis).
Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson
AQA C6(New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes)
Lesson: C6.4 – The effect of catalysts
Specification points covered =
4.6.1.4 - Catalysts
A fully resourced lesson about catalysts to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE Spec
Entire resources to cover all content in paper 2 of the new GCSE specifications.
All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics.
Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons.
The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks.
Specification points covered are:
Paper 2, Topic 1 - Rate and extent of chemical change
Trilogy and triple specification points and lessons:
4.6.1.1 - Calculating rates of reaction (C6.1 lesson)
4.6.1.2 - Factors which affect the rate of chemical reactions (C6.2 lesson)
4.6.1.3 - Collision theory and activation energy (C6.2 lesson)
REQUIRED PRACTICAL 5 - C6.3 lesson
4.6.1.4 - Catalysts (C6.4 lesson)
4.6.2.1 - Reversible reactions (C6.5 lesson)
4.6.2.3 - Energy changes and reversible reactions (C6.5 lesson)
4.6.2.3 - Equilibrium (C6.6)
4.6.2.4 - The effect of changing conditions on equilibrium (HT only) (C6.6 lesson)
4.6.2.5 - The effect of changing concentration (HT only) (C6.6 lesson)
4.6.2.6 - The effect of temperature changes on equilibrium (HT only) (C6.6 lesson)
4.6.2.7 - The effect of pressure changes on equilibrium (HT only) (C6.6 lesson)
Paper 2, Topic 2 - Organic chemistry
Trilogy and triple specification points and lessons:
4.7.1.1 – Crude oil, hydrocarbons and alkanes (C7.1 lesson)
4.7.1.2 – Fractional distillation and petrochemicals (C7.2 lesson)
4.7.1.3 –Properties of hydrocarbons (C7.2 lesson)
4.7.1.4 – Cracking and alkenes (C7.3 lesson)
Chemistry Triple science specification points and lessons:
4.7.2.1 – Structure and formulae of alkenes (C7.4 lesson)
4.7.2.2 – Reactions of alkenes (C7.4 lesson)
4.7.2.3 – Alcohols (C7.5 lesson)
4.7.2.4 – Carboxylic acids (C7.6 lesson)
4.7.2.4 – Reaction of carboxylic acid and alcohols (esters) (C7.7 lesson)
4.7.3.1 – Addition polymerisation (C7.8 lesson)
4.7.3.2 – Condensation polymerisation (HT) (C7.9 lesson)
4.7.3.3 – Amino acids (HT) (C7.10 lesson)
4.7.3.4 - DNA and other naturally occurring polymers (HT) (C7.11 lesson)
Paper 2, Topic 3 - Chemical analysis
Trilogy and Chemistry only specification points:
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
Chemistry Only specification points:
4.8.3.1 + 4.8.3.6 + 4.8.3.7 (TRIPLE) - Flame tests, instrumental analysis and flame emission spectroscopy
4.8.3.2 (TRIPLE) - Identifying cations using sodium hydroxide
4.8.3.3-5 (TRIPLE) - Identifying anions
Required practical 6 + 7 covered in lessons.
Paper 2, Topic 4 - Chemistry in our atmosphere
Trilogy and chemistry only specification points covered:
4.9.1.1 - The proportions of different gases in the atmosphere
4.9.1.2 - The Earth's early atmosphere
4.9.1.3 - How oxygen increased
4.9.1.4 - How carbon dioxide decreased
4.9.2.1 - Greenhouse gases
4.9.2.2 - Human activities and greenhouse gases
4.9.2.3 - Global climate change
4.9.2.4 - The carbon footprint and its reduction
4.9.3.1 - Atmospheric pollutants from fuels
4.9.3.2 - Properties and effects of atmospheric pollutants
Paper 2, Topic 5 - The Earth's resources
Trilogy and separate specification points:
4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson)
4.10.1.2 - Potable water (C10.2 lesson)
Required practical 8 (C10.2 lesson)
4.10.1.3 - Waste water treatment (C10.3 lesson)
4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson)
4.10.2.1 - Life cycle assessment (C10.5 lesson)
4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson)
TRIPLE Chemistry only specification points:
4.10.3.1 - Corrosion and its prevention (C10.7 lesson)
4.10.3.2 - Alloys as useful materials (C10.8 lesson)
4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson)
4.10.4.1 - The Haber process (C10.10 lesson)
4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)
OCR 21st century science C2 lessons. All lessons to cover OCR C2 material choices unit of work. Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
AQA C2.3 (new spec - 4.2.3 - paper 1, topic 2 new spec) - Ionic compounds and formula
A fully resourced lesson about ionic compounds and formula to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter).
Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.
AQA C4 (New GCSE Spec – Unit 4.4 – Chemical changes)
Lesson: C4.9 - What is electrolysis?
Specification points covered =
4.4.3.1 - The process of electrolysis (C4.9 lesson)
4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson)
4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson)
4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson)
A fully resourced lesson about electrolysis to be used when teaching the New specification of AQA C4 (Paper 1, Topic 4).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.8 – Useful alloys (TRIPLE ONLY LESSON)
Specification points covered =
4.10.3.2 - Useful alloys
A fully resourced lesson about useful alloys, focussing on copper, aluminium, gold and steel to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides. Lesson has a past 6 mark question within to allow assessment of extended answer questions.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.9 – Glass, ceramics, polymers and composites (TRIPLE ONLY)
Specification points covered =
4.10.3.3 - Ceramics, polymers and composites
A fully resourced lesson about glass, ceramics, polymers and composites to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.7 – Rusting and its prevention (TRIPLE ONLY)
Specification points covered =
4.10.3.1 - Corrosion and its prevention
A simple, easy to follow lesson about rusting and the prevention of rusting to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.10 – Making ammonia and the Haber process (TRIPLE ONLY)
Specification points covered =
4.10.4.1 - The Haber process
A fully resourced lesson about Making ammonia and the Haber process to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New Specification! Chemical analysis (Paper 2, topic 3) (4.8) (TRILOGY ONLY LESSONS)
All lessons to cover paper 2, topic 3 (4.8) from the new spec (exams 2018). Lessons to cover only the 'trilogy' science route.
(Lessons to cover both trilogy and chemistry separate science lessons available in shop!)
The lessons include the required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these.
Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons.
There is also opportunity to assess extended answer questions in some of the lessons to allow to give extended feedback on their work in these tasks.
Specification points covered (lesson by lesson):
4.8.1.1 (TRILOGY) - Pure substances
4.8.1.3 (TRILOGY) - Chromatography
4.8.2 (TRILOGY) - Identification of gases (oxygen, carbon dioxide, hydrogen, chlorine)
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry)
Lesson: C3.7 (Triple Only) - Concentration in mol/dm3
Specification points covered = 4.3.4 Using concentrations of solutions in mol/dm3 (Higher tier)
A fully resourced lesson about Using concentrations of solutions in mol/dm3 to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes)
Lesson: C6.5 – Reversible reactions and energy changes in reversible reactions
Specification points covered =
4.6.2.1 - Reversible reactions
4.6.2.3 - Energy changes and reversible reactions
A fully resourced lesson about reversible reactions and energy changes within reversible reactions to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1).
Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources)
Lesson: C10.3 – Treating waste water
Specification points covered =
4.10.1.3 - Waste water treatment
A fully resourced lesson about using the treatment of waste water to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5 - Using resources).
Fully resourced with differentiated tasks and activities shown on power point slides.
