This is a power point quiz that i designed to help learners pass the IMI - On-line Health and Safety Test. Qualification Ref: 603/760/7 (although this is a great quiz for anybody learning health and safety in general). Qualification: IMI Level 1 automotive maintenance. Please see the link below for a video to show you more about these resources. https://youtu.be/B3acHJfQnt4 Resources: • 100 page health and safety quiz (moving resource) • Answer guide I have had great success when using this quiz 15min at the end of every lesson to re-enforce health and safety knowledge. I have added 100 popular health and safety questions that seem to pop up in the IMI health and safety test (although these are not guaranteed to show up) however, over 8 years on teaching this qualification at an alternative provision and I have only had a handful of learners fail the test and nobody has ever failed the test twice. I use this recourse: • As a competitive quiz in groups • As a competitive quiz individually • Print off for learners to revise from as a book • Send this power point to a learner’s email address, digital device so they can test themselves or revise from I reward marks and offer incentives for learners that give the correct answer. This power point will provide the foundational health and safety knowledge that will help any learner pass this on-line test. I have also provided an answer sheet that a TA, teacher or learner is able to use if they struggle to answer any of the questions. Please keep in mind, that the health and safety quiz have some questions on tools and equipment so before entering the test also quiz your learners on names and safety checks on tools and equipment. Thank you for reading.

A fantastic resource for those teaching BTEC Level 1 Introductory. This resource includes starter activities and plenary tasks, differentiated learning objectives, tasks with differentiation, employability tasks, and Maths and English tasks included (where possible). The resource is very interactive and has been put together by teachers to improve consistency. There are seven PowerPoints that relate to Learning Aim A and B. There are attached worksheets which help with the delivery of the Unit. The unit also includes an assignment workbook to aid the delivery and, therefore suits the level of the learner.

Do your students need to work as a team or group to meet an objective? Learning to work as a team is an important life skill that your students need to master for in the workplace and classroom. Working in groups and collaborating on problems and projects is all part of cooperative learning. This packet contains a professional PowerPoint presentation that should be viewed before teams take on a project of any sort or size. It comes with a revisions worksheet (with answers provided), and Teacher Notes (that can be used as a lesson plan). It is presented in word, pdf and ppt format and is fully editable. The following topics are covered: Qualities of an effective Team Member Skills required to work in a Team Making Decisions as a Team Defining Objectives using Smart Goals Roles and Responsibilities Expected Behaviours and Attitudes Bruce Tuckman Model for Team Collaboration Revision exercise - worksheet with answers Team Challenge If you have any questions about this resource please contact me at resourcecreator1@gmail.com. ** Leave a review for this resource and receive one free resource of your choice from my shop. Communications, Workplace, ESOL and Computing Resources

This booklet is designed to give students a focus for their work experience and helps them them to document the work experience process. Includes: Student code of conduct (student must sign prior to work), Target setting (example given that meets the expectation of employers), Diary (daily reflection), record of skills developed (how achieved and how to develop further), An explanation of the work placement process (for parents and employers). ***Add school logo and Print as a booklet***

This is an introductory presentation for the carpentry and joinery topic of 'Circular Saw' and/or 'Power tools' and 'Machines'. This is ideal regardless of delivering CSkills, City and Guilds or BTEC Contains plenty of diagrams, health and safety information, parts and types of circular saws, activities and discussion points. This presentation can also be used for Design and Technology, Resistant Materials or Woodwork high school sessions.

This is the resource to help learners grasp signage not just in construction but life. You will be able to cover all major signs such as mandatory, prohibited and fire safety. Ideal for covering health and safety.

**Unit 3 Constructing the Built Environment ** Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task. Excel tracker for controlled assessment tasks that links directly to the booklet. My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources. ** Please note this resource is available as part of my EDUQAS Construction and the Built Environment Starter Resource Bundle**

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.8 Health and Safety Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.6 Sustainable Construction Methods Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.7 Trades, Employments and Careers Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022 Unit 1 Introduction to the Built Environment: AC 1.5 Building Structures and Forms Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary. This resource will drastically reduce your planning time I have included useful links in the notes of the powerpoint for more information into different topics This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle

A collection of photos that I will be adding to over time for my students and for other teachers, on the topic of materials and their properties. Please leave me a review and I will send you any other resource of your choice for free (contact me: office@oceansproject.com). Check out my other resources at my shop: https://www.tes.com/teaching-resources/shop/sarah277 Let me know if you have any resource requests and I will tailor make a resource for you.

An ebook covering advanced cold water systems to be used during delivery, assessment and revision of level 3 plumbing courses. Interactive with embedded quizzes within the ebook to chart progress and offer feedback.

One of the most common gripes within the workplace is time wasted on Meetings. The first step to working on this is to define what a successful meeting looks like for your team. This brainstorming template is a starting point. Follow me for updates as I'll soon be putting up a full lesson on all you need to know about running a successful meeting. Meanwhile, please feel free to use this template. Hand it out at your next unruly meeting and see what ideas people come up with. When initiating change it is important to get buy in from all team members. Using this template will greatly assist with this. Please leave me a review :-) It would be much appreciated.

Key terms found in the workshop (9 different cards)