I am developing a full range of theory lessons to support the new AQA design technology GCSE starting in 2017. There are 30 lessons that are taught 1 a week throughout Y10. Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. To support the theory lessons I have uploaded, please download my pupil tracker sheet. As well as theory lessons I have uploaded project/skills learning journeys that can be easily customised to the projects you are delivering. All content is fully branded and is graphically consistent. Please check out my other resources and give feedback if you find my resources helpful. If there are any missing video links, please contact me and I will send.

English Literature overview poster/revision card. I have had these printed out and displayed around the English department. Pupils can clearly see key themes and characters. Great Exam preperation. I have 3 available (Romeo and Juliet, An Inspector Calls and Jekyll and Hyde)

English Literature overview poster/revision card. I have had these printed out and displayed around the English department. Pupils can clearly see key themes and characters. Great Exam preperation. I have 3 available (Romeo and Juliet, An Inspector Calls and Jekyll and Hyde)

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

Could be used as a stand alone theory lesson for delivery towards any DT qualification. I use this as part of the theory content of the new BTEC Tech Award Engineering qualification (Pearson). Please see my extensive range of other supporting resources.

I have produced a set of 40 starter/bell tasks that are to be used during the delivery of Unit 3, responding to an Engineering Brief. the aim is to refresh the theory content that has been delivered earlier in the course. I have produced a full set of resources to support this course, including a Scheme of Work, theory lessons, assignment briefs and exam/skills development available in my TES shop.

I have produced a lesson aimed at improving pupils performance during the new 9-1 AQA DT exam. It is hoped that it will help build confidence prior to the summer exam. Pupils will need to select materials and manufacturing processes for a range of products and be able to justify their selection. Please also see my Exam Techniques resources that are specifically based around the AQA DT specification.

I have produced a lesson aimed at improving pupils performance during Section C of the new 9-1 AQA DT exam. I have based it heavily on the structure of the SAM that was released. It is hoped that it will help build pupils confidence prior to the summer exam. I have based this question on a car booster seat, however it would be easy to modify it for any number of other products. I have not included a marking scheme for this. Please also see my Exam Techniques resources that are specifically based around the AQA DT specification.

I have created a lesson to help improve the exam technique of pupils sitting the new 9-1 AQA DT exam in the summer. It draws on the performance of my pupils in their Mock Exam (we used the SAM material for this). I have included a simple worksheet that will allow pupils to record each of the seven techniques that are outlined. Having delivered this lesson pupils should be asked to go through their mock exam papers again and use the techniques to improve their marks.

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation

I have produced a full range of theory lessons to support the AQA design technology GCSE 9-1. There are 40 lessons that are taught one a week throughout Y10 (listed below). Each lesson has learning objectives, starter/bell task, content (GIF’s used to support learning), plenary and summary slides in PowerPoint. I have also included a fully supported student handout which includes homework questions and summative assessment section. As well as theory lessons I have uploaded projects that are delivered alongside these theory topics. Please check these out in my shop along with tracker sheets and learning journeys for a complete package. 1 Properties 2 Metals 3 Woods and Boards 4 Seasoning and Conversion 5 Cutting 6 Drilling 7 Polymers 8 Composites 9 Papers and Boards 10 Orthographic Drawing 11 Isometric/Perspective 12 Types of Movement 13 Levers 14 Linkages and Cams 15 Gear Trains 16 Pulleys and Belts 17 Programmable Systems 1 18 Programmable Systems 2 19 Programmable Systems 3 20 Textiles 21 Marcel Breuer 22 Philippe Starck 23 Stock Forms 24 Chiselling, Planing, Turning 25 Flat Pack Furniture, 26 Wood Finishes 27 Quality Manufacture 28 Commercial Routing and Turning 29 Scales of Production 30 Smart, Modern Materials 31 Design Strategies 32 Dyson - Prototype Development 33 Apple - Recycling and Disassembly 34 Industry 35 Enterprise 36 Production Techniques 37 Design Decisions 38 Sustainability 39 Energy Generation and Storage 40 Exam Preparation