Ridgus's Shop
I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
43Uploads
21k+Views
8k+Downloads
I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
All resources
Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.1-1.8 All Lessons
This is a bundle for EDUQAS Construction and the Built Environment Unit 1. The new specification that was introduced in 2022.
In this bundle is a teaching powerpoint and student tasks for each of the Assessment Criteria.
AC1.1 The Sector
AC1.2 The Built Environment Life Cycle
AC1.3 Type of Building and Structure
AC1.4 Technologies and Materials
AC1.5 Building Structures and Forms
AC1.6 Sustainable Construction Methods
AC1.7 Trades, Employments and Careers
AC1.8 Health and Safety
Each powerpoint is a breakdown of the AC and is lesson by lesson. Each lesson is interactive with tasks that can be printed directly from the powerpoint. Each lesson has a starter and plenary.
This will save you hours of planning.
Also included is a Unit 1 knowledge tracker.
Please check out other resources in my shop for this course.
Bundle total is £34
Sold at £25 saving you 26%
EDUQAS Construction and the Built Environment Unit 1 AC1.8
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.8 Health and Safety
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.7
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.7 Trades, Employments and Careers
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.6
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.6 Sustainable Construction Methods
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.5
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.5 Building Structures and Forms
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.4
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.4 Technologies and Materials
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.3
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.3 Types of Building and Structure
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
Bundle
EDUQAS Construction and the Built Environment Unit 1 & 3 (New Spec) Starter Kit
An excellent bundle for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incorporated. Tasks can be printed directly out from powerpoint and given to students. Each lesson has a starter and a plenary.
Currently Assessment Criteria AC 1.1 The Sector and AC 1.2 The Built Environment Life Cycle have teaching powerpoints and the final 3 Assessment Criteria will be added in the coming months.
Teacher/ Student tracker for Unit 1 that students can Red, Amber, Green their understanding. All assessment criteria covered
**Unit 3 Constructing the Built Environment **
Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task.
Excel tracker for controlled assessment tasks that links directly to the booklet.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
EDUQAS Construction and the Built Environment Unit 3 (New Spec) Booklet and Tracker
**Unit 3 Constructing the Built Environment **
Controlled assessment framework booklet for students that can be fully adapted to choice of Scenario and Task.
Excel tracker for controlled assessment tasks that links directly to the booklet.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
**
Please note this resource is available as part of my EDUQAS Construction and the Built Environment Starter Resource Bundle**
EDUQAS Construction and the Built Environment Unit 1 Knowledge Tracker
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Teacher/ Student tracker for Unit 1 that students’ can Red, Amber, Green their understanding. All assessment criteria covered in detail and links directly to each lesson in the teaching powerpoints. It is clear and easy to see and can be stuck in student books, displayed on the board, or shown to parents.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
**
Please note this resource is available as part of my EDUQAS Construction and the Built Envrionment Starter Resource Bundle**
EDUQAS Construction and the Built Environment Unit 1 AC1.2
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.2 The Built Environment Life Cycle
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
EDUQAS Construction and the Built Environment Unit 1 AC1.1
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
Plumbing Project Booklet - Construction
A student booklet designed for a plumbing project that can last 15 lessons. Copper pipe plumbing a letter or number. Soldering, pipe bending etc
Each page has tasks which are linked to the teaching powerpoint and the practical lessons are also broken down inside so students understand what they need to do.
At the end of each page their is an option for the students to self access against a pre-set criteria and this is linked to a quick and easy teacher assessment.
Can be used as a small introductory project to a construction course or a different DT project for KS3 and 4
Construction Legislation Card Sort
An activity that can be used as a starter or plenary and helps students learn what Construction Health and Safety legislation stands for. Cards are set out on a grid ready to be printed and cut.
Bundle
WJEC Constructing the Built Environment Unit 1: Safety and Security in Consruction
This Bundle include a multiple lesson powerpoint and a student work booklet for WJEC Unit 1 Safety and Security in Construction. It is modelled on the specification and covers all the learning objectives and assessment criteria.
Topics Covered:
Signs (RED, BLUE, YELLOW, GREEN, ORANGE)
Risk Assessments
Sub and Super Structure
Fire extinguishers
Permits to Work
Hazard/ Risk/ Control Measure
Security of Construction Site
Health and Safety Legislation
Responsibility of Employer and Employee
It can also be used with other Construction course to as it would provide students with a very solid understanding of Health and Safety in the construction industry.
WJEC Safety & Security in Construction UNIT 1 Student Work Booklet
A student work booklet for the WJEC Constructing the Built Environment Unit 1: Safety and Security in Construction.
Lots of different worksheets with content taking directly from the Specification and following each of the learning objective and assessment criteria in order.
The booklet is full of different types of tasks and activities with lots of visual stimuli. Plenty of opportunity for student self assessment and teach assessment. This booklet will help students learn the key topics for the exam but also use it as revision later on and teacher can track knowledge. This is a resource very suitable for lower ability students.
Topics Covered:
Signs (RED, BLUE, YELLOW, GREEN, ORANGE)
Risk Assessments
Sub and Super Structure
Fire extinguishers
Permits to Work
Hazard/ Risk/ Control Measure
Security of Construction Site
Health and Safety Legislation
Responsibility of Employer and Employee
This resource can also be purchased as part of a bundle with the Unit 1 Safety and Security powerpoint found in my shop!
Edexcel Design and Technology AC1.4 Smart/ Composite Materials and Technical Textiles
A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.4 Smart and composite materials and technical textiles. The Powerpoint covers: the different types of materials, their categories and their properties. All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interesting activities
Keywords and descriptions
Starters and plenaries
Levelled WALTS and WILFS (learning outcomes)
A great Pick a Mix material activity
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
Edexcel Design and Technology AC1.12 Natural and Manufactured Timbers
A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.12 Natural and Manufactured Timbers. The Powerpoint covers: Soft Wood, Hard Wood, Man made boards, hardness, toughness All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interesting activities
Keywords and descriptions
Starters and plenaries
Levelled WALTS and WILFS (learning outcomes)
Practice exam questions
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
Edexcel Design and Technology AC1.8 Ferrous and Non- Ferrous Metals
A set of lessons which cover Edexcel Design and Technology Core Content Objective 1.8 Categorisation of Ferrous and Non- Ferrous Metals. The Powerpoint covers: Ferrous/ Non Ferrous, Mechanical and Physical properties, ductility, Malleability and hardness All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interesting activities
Keywords and descriptions
Starters and plenaries
Levelled WALTS and WILFS (learning outcomes)
Practice exam questions
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
Edexcel Design and Technology AC1.5 Mechanical Devices
A lesson which covers Edexcel Design and Technology Core Content Objective AC1.5 Mechanical Devices. The Powerpoint covers: Levers, motion, Velocity Ratio, Mechanical Advantage and efficiency. All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interactive starter
Keywords and description
Levelled WALTS and WILFS (learning outcomes)
Practice questions and modelled examples
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.