Hero image

Teach Product Design

Average Rating5.00
(based on 5 reviews)

16 years teaching Design and Technology-including Product Design, Engineering, Graphics, Resistant Materials, Systems, Electronics and Textiles. DATA Award winner, TEEP trained and PGDIP Design Education. CAD Engineer- Solidworks trained and current user of Fusion 360 and Onshape.

52Uploads

11k+Views

10k+Downloads

16 years teaching Design and Technology-including Product Design, Engineering, Graphics, Resistant Materials, Systems, Electronics and Textiles. DATA Award winner, TEEP trained and PGDIP Design Education. CAD Engineer- Solidworks trained and current user of Fusion 360 and Onshape.
MATERIAL PROPERTIES- GCSE/A LEVEL
teachproductdesignteachproductdesign

MATERIAL PROPERTIES- GCSE/A LEVEL

(0)
Lesson focus- Material Properties Areas covered: Physical, Mechanical including Plasticity, Malleability, Ductility, Elasticity, Toughness, Hardness, Durability,Strength, Stability, Tensile, Compressive, Bending, Shear, Torsion, Conductors, Insulators. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (14 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (3 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
SAFETY REGULATIONS- GCSE/A LEVEL
teachproductdesignteachproductdesign

SAFETY REGULATIONS- GCSE/A LEVEL

(0)
Lesson focus- SAFETY- GCSE/ A LEVEL Areas covered: H&S Act, Responsibility, COSHH, Workshop safety signage, JCB case study. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (26 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (3 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
2023-24 NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 2
teachproductdesignteachproductdesign

2023-24 NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 2

(0)
Product Focus- Maintenance Rig X15 Lesson Powerpoints covering all assessment areas- 2.1.1 to 2.4.2 Each powerpoint can be edited and contains- starter activity, Learning Objective, Success/Assessment criteria, task info, SPAG/ACCESS FM (where appropriate) and opportunities for review/reflect via self/peer assessment. X1 blank student booklet. Assessment sheets- for teacher and student use.
PLASTIC SKILLSTICK
teachproductdesignteachproductdesign

PLASTIC SKILLSTICK

(0)
Used with KS 3, Level 1+2 Engineering and GCSE students to develop practical skills. X1 Work booklet (editable)- students complete to consolidate their learning. X6 Lesson Powerpoints- each lesson contains a starter, learning objective, differentiated success criteria, example work, templates/drawings when required and review opportunities. Topics coverd- 3D Printing, Vac Forming, Injection Moulding, Laser Cutting, Press Forming, Line Bending and Resin Casting. CAD model of skillstick example.
WELDING - GCSE/ A LEVEL
teachproductdesignteachproductdesign

WELDING - GCSE/ A LEVEL

(0)
Lesson focus- WELDING - GCSE/ A LEVEL Areas covered: MIG, TIG, Spot, Oxy, Arc, Brazing and Hard Soldering. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (12 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (2 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 1- PHONE HOLDER FOCUS
teachproductdesignteachproductdesign

NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 1- PHONE HOLDER FOCUS

(0)
NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 1 Product Focus- Phone Holder. X15 Lesson Powerpoints covering all assessment areas- 1.1.1 to 1.4.4 Each powerpoint can be edited and contains- starter activity, Learning Objective, Success/Assessment criteria, task info, SPAG/ACCESS FM (where appropriate) and opportunities for review/reflect via self/peer assessment. X1 blank student booklet. Assessment sheets- for teacher and student use.
QUALITY CONTROL AND QUALITY ASSURANCE- GCSE/A LEVEL
teachproductdesignteachproductdesign

QUALITY CONTROL AND QUALITY ASSURANCE- GCSE/A LEVEL

(0)
Lesson focus- QC/QA- GCSE/A LEVEL Areas covered: TQM, SCRUM, LEAN, SIX SIGMA, CPA Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (27 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (6 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
PROJECT MANAGEMENT- TQM, SCRUM, LEAN, SIX SIGMA, CPA.  A LEVEL
teachproductdesignteachproductdesign

PROJECT MANAGEMENT- TQM, SCRUM, LEAN, SIX SIGMA, CPA. A LEVEL

(0)
Lesson focus- PROJECT MANAGEMENT- A LEVEL Areas covered: TQM, SCRUM, LEAN, SIX SIGMA, CPA Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (12 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (3 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
MATERIAL TESTING- GCSE/A LEVEL
teachproductdesignteachproductdesign

MATERIAL TESTING- GCSE/A LEVEL

(0)
Lesson focus- Workshop and Industrial testing. Areas covered-Fair testing, Workshop Testing, Industrial Testing, Tensile, Hardness, Toughness, Malleability, Ductility, Corrosion, Electrical+ Thermal Conductivity, Non Destructive, X Rays, Ultrasonic. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (22 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (x4 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
AS LEVEL NEA PRODUCT DESIGN /DESIGN AND TECHNOLOGY
teachproductdesignteachproductdesign

AS LEVEL NEA PRODUCT DESIGN /DESIGN AND TECHNOLOGY

(0)
AFL focussed on WJEC AS Level- can easily be removed/adapted to to meet the requirements for OCR, AQA, Edexcel etc. X29 Lesson Powerpoints- developed and used over x16 years X1 AFL doc (student and teacher use)- WJEC AS Level Contains all sections - A, B, C, D and E. Includes example work which achieved full marks. All Powerpoints include: Starter activity, AFL, Learning Objectives, Success Criteria, Example work, Clear instructions, Example layouts, Literacy support (ACCESS FM). Powerpoints included: Analysis, Product Analysis, Product Deconstruction, Target Market, Past Designers, Anthropometric/Ergonomics, Materials/components, Researcgh Summary, Brief, Specification, Design Ideas, Annotation, Design Evaluation, Development Team, Modelling, Modelling Reflection, ACCESS FM development, CAD, Further Development, Final CAD, Working Drawing, Final Solution, Testing, Target Market feedback, Specification Evaluation and mods/improvements.
VACUUM + THERMOFORMING-  GCSE/ A LEVEL
teachproductdesignteachproductdesign

VACUUM + THERMOFORMING- GCSE/ A LEVEL

(0)
Lesson focus- VACUUM + THERMOFORMING- GCSE/ A LEVEL Areas covered: Process, Materials, Products, Advantages, Disadvantages, Key Features, Former Design and Thermoforming. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (18 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (4 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
FEASIBILITY STUDIES- GCSE/A LEVEL
teachproductdesignteachproductdesign

FEASIBILITY STUDIES- GCSE/A LEVEL

(0)
Lesson focus- FEASIBILITY STUDIES- GCSE/ A LEVEL Areas covered: Lean Manufacturing, Computer Modelling, Simulation and Planning, Prototypes, Bottleneck predictions, Cycle Time. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (17 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (3 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
2023-24 NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 1
teachproductdesignteachproductdesign

2023-24 NEW SPEC WJEC LEVEL 1/2 ENGINEERING UNIT 1

(0)
Product Focus- Maintenance Rig X15 Lesson Powerpoints covering all assessment areas- 1.1.1 to 1.4.4 Each powerpoint can be edited and contains- starter activity, Learning Objective, Success/Assessment criteria, task info, SPAG/ACCESS FM (where appropriate) and opportunities for review/reflect via self/peer assessment. X1 blank student booklet. Assessment sheets- for teacher and student use. Note- As stated in the assessment material and specification- the resources will need to be adapted to suit your centre e.g. budget, materials and equipment.
METAL FINISHING - GCSE/ A LEVEL
teachproductdesignteachproductdesign

METAL FINISHING - GCSE/ A LEVEL

(0)
Lesson focus- METAL FINISHING - GCSE/ A LEVEL Areas covered: Painting, Electroplating, Dip Coating, Powder Coating, Galvanising, Anodsing, Varnishing, Sealant, Preservatives, Polishing, Cathodic Protection. Currently+previously used with KS4+KS5- Engineering and Product Design. Lesson Powerpoint (17 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (3 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
DESIGN HISTORY AND MOVEMENTS- GCSE/ A LEVEL
teachproductdesignteachproductdesign

DESIGN HISTORY AND MOVEMENTS- GCSE/ A LEVEL

(1)
Lesson focus- DESIGN HISTORY AND MOVEMENTS- GCSE/ A LEVEL Areas covered: Gothic, Pre Modernism, Art and Crafts, Art Nouveau, Early Modernism, De Stijl, Bauhaus, Modernism, Art Deco, Streamling, Contemporary Style, Post Modernism, Pop Art, Memphis, Late 20th Century. Currently+previously used with KS4+KS5- Product Design. Lesson Powerpoint (48 slides)- contains Starter, Learning Objective, Success criteria, Key words, Big Question, Task Info, Questions and Review. Worksheet/s provided (1 pages)- can be edited. Note: To edit the slide details- use the ‘edit master slide’ option- you can edit/modify to suit.
BIOMIMICRY- CANDLE TEA LIGHT HOLDER
teachproductdesignteachproductdesign

BIOMIMICRY- CANDLE TEA LIGHT HOLDER

(0)
X10 Lesson Powerpoints (can be edited)- each lesson contains a starter, learning objective, differentiated success criteria, background/theory info, example work, templates, video links, review opportunities. AFL- Final making/manufcaturing- all graded/summative assessment- structure template provided. All other lessons/activites- formative assessment- criteria provided on the worksheets and powerpoints. x1 (10 page) project booklet- designed to be printed A3, however it has been used/printed A4 previously. The booklet relfects/matches the powerpoints. Contains- front cover- track progress, starter images, learning objective, differentiated success criteria, templates and review opportunities. Booklet provided as a PDF and Coreldraw file- PDF can be printed and edited in any 2D CAD program e.g. Coreldraw, Illustrator, Serif etc. Topics coverd- Metal extraction, Metal types/properties, Biomimicry, Design Ideas, Cutting timber+metal, Modelling and manufacturing reflection.
USB PEN DESIGN + MAKE PROJECT
teachproductdesignteachproductdesign

USB PEN DESIGN + MAKE PROJECT

(0)
Developed over x15 years- used with students aged 11-18. x27 hour project. X19 Lesson Powerpoints- each lesson contains a starter, learning objective, differentiated success criteria, background/theory info, example work, templates, video links, review opportunities. AFL- Product Analysis, Development (SCAMPER) and Evaluation- all graded/summative assessments- structure templates provided. All other lessons/activites- formative assessment- criteria provided. x1 (16 page) project booklet- designed to be printed A3, however it has been used/printed A4 previously. The booklet relfects/matches the powerpoints. Contains- front cover- track progress, starter images, learning objective, differentiated success criteria, templates and review opportunities. Video tutorials- CAD provided. Also example CAD files provided to support teaching. Topics coverd- Product Analysis, Design Ieas/Strategies, Annotation, SCAMPER, Modelling, CAD/Fusion, Further Development (sketch over models), Isometric, Orthographic, 3D Printing, Packaging (functions+symbols), Packaging 2D CAD, Vac Forming, Printing Finishes and Self Evaluation.
Onshape Learning Capture Sheet
teachproductdesignteachproductdesign

Onshape Learning Capture Sheet

(0)
The document has been created to allow students to capture/record their understanding of the CAD programme- Onshape. The document included x4 audio clips explaining the task to complete. The tasks are differentiated for different abilities/experience. Example slide included. The slide template can be duplicated for each skill area to be developed.
Autodesk Fusion 360 Free Tutorials and Models
teachproductdesignteachproductdesign

Autodesk Fusion 360 Free Tutorials and Models

(1)
Fusion 360 tutorial document which has links to 65 free models and 37 video tutorials. If you click on the image on the first page- this links to the relevant section. Click on the youtube icon for access to the online tutorial. If you want access to the free models- click on the link found in the description.
PTC Onshape Free Tutorials
teachproductdesignteachproductdesign

PTC Onshape Free Tutorials

(2)
PTC Onshape tutorial document which has links to over 50 video tutorials. If you click on the image on the first page- this links to the relevant section. Click on the youtube icon for access to the online tutorial. If you use the search public option in Onshape and type TPD Extrude, TPD Revolve etc you can access the files/models/drawings- which you can copy/edit/share