This is a teacher or student controlled, realistic 3d simulation of an experiment that confirms Boyle’s Law: pressure times volume is a constant for a gas at constant temperature. The apparatus consists of a syringe with its plunger that allows for the pressure to be changed under control of the user and for the volume to be measured. The user has control over the weight on the syringe plunger which changes the pressure. The user also controls a micrometer screw gauge that is used to measure the diameter of the syringe’s plunger. The user can position themself anywhere within the laboratory in order to take readings from the instrumentation. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Download is a PowerPoint giving full instructions including a video, background on the Physics and link to the simulation. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that allows the measurement of Planck’s constant using coloured LEDs. The user controls the voltage reaching the LED and can choose from a selection of different coloured LEDs. Two multimeters monitor the current and the voltage. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads include: a PowerPoint giving full instructyons including a video, background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that shows that the structure of an atom is consistent with having a small, postitively charged nucleus. The user controls the rotation of the particle detector whilst monitoring the number of particles it is detecting. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads include: a PowerPoint giving full instructyons including a video, background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." ​Physics Scholar Coordinator. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a teacher or student controlled realistic 3d simulation of an experiment to determine the field strength of a magnetic field by observing the force it exerts on a current carrying wire. Electronic kitchen scales are used to indicate the force on the wire whilst a power supply can be controlled to vary the current in the wire. The user has control over the power supply’s voltage and the operation of the digital scales. The user can position themself anywhere within the laboratory in order to take readings from the instrumentation. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads are{ a PowerPoint giving full instructyons including a video , background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School *I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." * Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a teacher or student controlled, realistic 3d simulation of an experiment that allows the comparison of the heat radiated from different surfaces using a Leslie cube and a digital thermometer. The user can control the surface of the Leslie cube facing the thermometer and the position of the thermometer in relation to the cube. The user can position him/herself anywhere within the laboratory in order to take readings of the temperature. You can try one of the simulations from our website. Instructions are viewable within the simulation. • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student controlled realistic 3d simulation of a flux linkage experiment using a signal generator, search coil and oscilloscope. This experiment establishes the relationship between the induced voltage in a coil when at various angles to another coil. It uses audio signals from a signal generator to vary the input voltage. By measuring the voltage induced in the search coilusing an oscilloscope, and varying the angle of the search coil, the relationship between the induced voltage and the angle of the search coil can be established The user has control over the angle of the search coil, the amplitude and frequency of the signal from the signal generator, the various controls of the oscilloscope which include the amplitude sensitivity, the time frame, and the various cursor controls. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that allows you to measure the specific heat of brass. The specific heat of a substance is the amount of heat it can hold per unit mass. In this experiment we place a brass weight in boiling water. When the weight is in the boiling water it is gaining heat energy. After about four or five minutes it will be heated evenly to the temperature of the water. The brass weight can then be moved to the water in the calorimeter. It will then heat the water and the calorimeter. Knowing the specific heat of the water and calorimeter and the maximum temperature attained by them allows you to calculate the heat gained by them. This amount of heat gained must be the same as the amount of heat lost by the brass. This enables the specific heat of brass to be calculated. The user can move the weight from the heated water to the calorimter, he/she can control the shaker. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Whilst efforts will be made to maintain third party links to sit

Extremely realistic 3d simulation of an airtrack. This is a student or teacher controlled, realistic 3d experiment uses an AirTrack to confirm Newton’s second law that force = mass times the acceleration. A pully arrangement is used to allow an adjustable weight to pull the glider along the AirTrack so that it accelerates. By measuring the time the glider takes to pass through two successive photogate timers its acceleration can be calculated. Changing the weight pulling the glider allows for a range of forces and accelerations to be observed. These values can be plotted to confirm the law. The user has control over the air pump, the positions of the photogates and their settings, the weight pulling the glider. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, had the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that allows the muzzle velocity of a shell to be calculated using a ballistic balance. An AK47 fires a shell into a suspended block of wood imparting its kinetic energy into the potential energy of the block and shell combined at its highest position of its swing. Equating these two energies, and taking consideration of the equivalence of the momentums of the shell, and the shell and block together gives the required result. The user controls the firing of the rifle and measures the extent of the swing of the ballistic balance. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. DDownloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that allows you to find the charge on an electron by examining the motion of charged polymer balls in an electric field. The user controls the electric field: polarity and strength, the introduction of the polymer balls to the examination chamber, and can measure the separation of the electrostatic plates using a micrometer screw gauge. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled realistic 3d simulation of a monochromatic laser and a diffraction grating to produce a diffraction pattern which enables the wavelength of the laser light to be determined. Then the number of lines of a different grating can be deduced with some careful measurements. The user has control over the screen angle, which grating to use, the position of the grating and switching the laser on and off. The user can position him/herself anywhere within the laboratory. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. As revision for an experiment that has previously been performed in the laboratory. For home-learning where there is no access to a laboratory. To make up for an experiment missed due to sickness. As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. ​Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a teacher or student controlled, realistic 3d simulation of an experiment that demonstrates that different mediums bend light by different amounts and allows us to confirm Snell’s law of refraction. The user can control the type of transparent material used, its position and orientation. The user can also control a protractor in a similar way in order to make measurements of the angle of the mateiral used. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled realistic 3d simulation of an investigation into Simple Harmonic Motion (SHM) using a mass-spring system. The investigation will allow us to determine the spring constant. Different weights can be placed on the spring and then given an impulse. A timer is used to determine the period of oscillation. The user has control over the weight on the spring, the position of the fiducial marker and the timer controls. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator. Licence This product is for a single user and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled 3d simulation of an experiment that allows you to verify Hooke’s Law which states that the amount a substance stretches when a force is applied to it is proportional to the force. When we apply some force an elastic or a steel wire it will stretch and intuitively we are aware that the bigger the force the more it will stretch. We are also aware that some materials stretch more than others. What exactly is the relationship between the force and the amount something stretches for a particular material? That’s the question that we are going to answer with this experiment. The user can control the weight applying a force to the wire. The user is free to move anywhere within the laboratory in order to interact with the apparatus. You can try one of the simulations from our website. Instructions are viewable within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads comprise a Powerpoint giving full instructions including a video, background on the Physics and a zip file containing the simulation application. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Physics Scholar Coordinator.

There are 6 titles: Bernard Cuisine Louvre Proverbs Trafic Each title consists of an audio track by a French native speaker, and Word document with the French and English translation plus grammar notes on each sentence. For example, the first two sentences from the title ‘Louvre’ title are: Dans les années vingt, la ville de Paris était divisée en différents petits villages. In the twenties, the city of Paris was divided into small different villages. • Auxiliary être in the imperfect tense followed by the past participle of diviser, used here as an adjective. • Divisée (feminine singular) agrees with la ville de Paris.Differents, adjective, agrees with the noun villages. • The adjective petits agrees with the noun villages. Montmartre, par exemple, était déjà renommé pour ses vignes, ses jardins et ses moulins. • Montmartre, for instance, was already famous for its vineyards, its gardens and its windmills. • Imperfect tense of the auxiliary être followed by the adjective renommé. • Ses, possessive adjective, plural form of son, sa. These are for you to use anyway that you want as long as you do not copy to another institution or anyone outside of your school/college. Licence This product is for mulit-user at a single site and is for personal and classroom use only. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.

This is a student or teacher controlled, realistic 3d simulation of an experiment that shows that the kinetic energy gained by a glider on an airtrack is equal to the potential energy lost though its descent on the downward slope of the airtrack. The user controls the raising of one end of the track, the starting position of the glider, the type and postions of the phototimers, and the air pump. The user is free to move anywhere within the laboratory in order to interact with the apparatus. Try a simulation from our website. Instructions on performing the experiment and controlling the simulation are within the simulation. The simulation is perfect for demonstrating this experiment in front of the class but can also be used by students in a variety of ways: • Directly to prepare for a laboratory experiment by familiarising them with the equipment to be used and the methodology of the experiment. • As revision for an experiment that has previously been performed in the laboratory. • For home-learning where there is no access to a laboratory. • To make up for an experiment missed due to sickness. • As a personal experience of an experiment normally only performed by the teacher in front of the class. Downloads are: a PowerPoint giving full instructyons including a video , background on the Physics and the simulation application in a zip file. The Virtual Physics Laboratory of which this simulation is a part, has the Association for Science Education’s Green Tick of Approval. More information can be found on our website. I’ve found your software very useful when a concept comes up with pupils and I have to demonstrate something really quickly without having the time to set up a formal experiment for them. The graphics are great and I really like the ability to move around the classroom and observe the experiment from different aspects. I am far more likely to go to one of your interactive experiments if it’s demonstrating something that we don’t have equipment for.“ Andrew McPhee Wellington School I thought that the controls were pretty easy to get used to and the detail in the apparatus was excellent being able to zoom in and see the set up of the multi-meter and read scales, being careful of parallax. This type of software is most useful in experiments which can’t be done in the lab like the gravity on the moon or where the equipment is too expensive or difficult to use like the Millikan Oil drop." Licence This product is for a single user and is for personal and classroom. Copying any part of this resource is forbidden and violates the Digital Millennium Copyright Act (DMCA). Purchasing and downloading this product is your consent to these conditions.