I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
I am a Secondary teacher from Reading. I am an experienced Construction teacher. I also teach Design Technology and Engineering. Please have a look at my resources.
An activity that can be used as a starter or plenary and helps students learn what Construction Health and Safety legislation stands for. Cards are set out on a grid ready to be printed and cut.
A student friendly lesson powerpoint based on Fibre Optics. A selection of activities (starter, main, plenary) and leveled learning objectives. The content will help students understand the wider topic of the development of new technologies. Based on the Engineering Unit 1 specification but is versatile and be used in Design Technology and other STEM lessons.
Attached are two photographs which show a simple but effective way to demonstrate fibre optics. Using a torch and a piece of clear Acrylic tube it can show how ‘light’ travels through the wire. This can used when showing the Polar Bear hair slide.
A set of lessons which cover Edexcel Design and Technology Core Content Objective 1.8 Categorisation of Ferrous and Non- Ferrous Metals. The Powerpoint covers: Ferrous/ Non Ferrous, Mechanical and Physical properties, ductility, Malleability and hardness All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interesting activities
Keywords and descriptions
Starters and plenaries
Levelled WALTS and WILFS (learning outcomes)
Practice exam questions
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
A lesson which covers Edexcel Design and Technology Core Content Objective AC1.5 Mechanical Devices. The Powerpoint covers: Levers, motion, Velocity Ratio, Mechanical Advantage and efficiency. All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interactive starter
Keywords and description
Levelled WALTS and WILFS (learning outcomes)
Practice questions and modelled examples
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Teacher/ Student tracker for Unit 1 that students’ can Red, Amber, Green their understanding. All assessment criteria covered in detail and links directly to each lesson in the teaching powerpoints. It is clear and easy to see and can be stuck in student books, displayed on the board, or shown to parents.
My aim is to create a whole resource package for the new specification as there currently are not any resources online. Watch this space and browse my shop for loads of other construction related resources.
**
Please note this resource is available as part of my EDUQAS Construction and the Built Envrionment Starter Resource Bundle**
A set of lessons which cover Edexcel Design and Technology Core Content Objective AC1.12 Natural and Manufactured Timbers. The Powerpoint covers: Soft Wood, Hard Wood, Man made boards, hardness, toughness All topics are directly taken from the textbook and course specification.
A student friendly powerpoint with:
Interesting activities
Keywords and descriptions
Starters and plenaries
Levelled WALTS and WILFS (learning outcomes)
Practice exam questions
Appropriate levels of challenge
This can also be purchased as part of a bundle of lessons which cover all of the assessment criteria of the Edexcel Design and Technology Core Content which the students are required to know for the exam.
A student friendly powerpoint covering two lessons on Aerodynamics and Blended Wingbodies based on the BTEC Engineering Unit1 Specification . 2- 3 lessons with a number of activities (starters etc.) which is can be used in Engineering but also other areas of Design Technology and STEM. Road bikes are used as an example to help students relate to the topic.
An excellent powerpoint for starting the new Level 1/2 Construction and built environment specification for teaching from 2022
Unit 1 Introduction to the Built Environment:
AC 1.1 The Sector
Lesson by lesson teaching powerpoints with levelled learning objectives and student tasks incoorperated. Tasks can be printed directly out from powerpoint and given to students- there is a mixture of learning opportunities and room for adapting tasks to higher or lower students. Each lesson has a starter and a plenary.
This resource will drastically reduce your planning time
I have included useful links in the notes of the powerpoint for more information into different topics
This resource is one of the 8 Assessment Criteria for Unit 1. They can be purchased individually but are also available as part of my EDUQAS Construction Unit 1 Resource Bundle
A student work booklet for the WJEC Constructing the Built Environment Unit 1: Safety and Security in Construction.
Lots of different worksheets with content taking directly from the Specification and following each of the learning objective and assessment criteria in order.
The booklet is full of different types of tasks and activities with lots of visual stimuli. Plenty of opportunity for student self assessment and teach assessment. This booklet will help students learn the key topics for the exam but also use it as revision later on and teacher can track knowledge. This is a resource very suitable for lower ability students.
Topics Covered:
Signs (RED, BLUE, YELLOW, GREEN, ORANGE)
Risk Assessments
Sub and Super Structure
Fire extinguishers
Permits to Work
Hazard/ Risk/ Control Measure
Security of Construction Site
Health and Safety Legislation
Responsibility of Employer and Employee
This resource can also be purchased as part of a bundle with the Unit 1 Safety and Security powerpoint found in my shop!
A good starter/ group activity with key structure related words and questions provided.
You can rig it so a certain group wins or make up different questions.
Students could make up questions as a flipped learning activity
I have made several different grids that can be printed and laminated so used multiple times and a set of example questions.
This activity is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop but also used on its own
Lesson Powerpoint and activities teaching about the structures of different bridges. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student task (printable worksheets within powerpoint)
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
Lesson Powerpoint and activities for a fun spaghetti project which directs students to build a structure which is tall or can hold the weight of bricks. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. A fun way for students to show they understand how to make a structure strong and resist force.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student help sheets and evaluation (printable worksheets within powerpoint)
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
A student/ teacher RAG (Red, Amber, Green) sheet that links directly to all the core content that students need to learn for the the exam in the Edexcel Design Technology (1-9) course.
It links directly to to the specification and text book from the exam board and is a useful way for students to track their knowledge when it comes to revision but for teachers to measure progress…
A student friendly powerpoint including 4-5 lessons covering materials and processes taken directly from the BTEC Engineering Unit 1 specification A number of interesting activities (Starters, pleneries etc) and leveled learning objectives. This can be used for Product Design and is very versatile. Uses superhero (marvel) example to help children relate.
Topics Covered:
Material Classification: Smart, High Performance, Modern and Composite
Uses (Products)
Sectors of Engineering
Manufacturing Processes
Forces
Deformation
A Powerpoint lesson on Bionics and how they have been developed by Biomedical Engineers. A number of activities, starter, You Tube examples and leveled learning objectives. Created for BTEC Engineering Unit 1 using information from the specification however can be used in STEM lessons or Design Technology Lessons.
Learners can begin to understand the wider topic of new technologies.
Lesson Powerpoint and activities for introducing students to Mega Structures (really big buildings). This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. A fun topic that students always enjoy- they are fascinated by really big buildings such as the Burj Khalifa
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student research task (printable worksheets within powerpoint)
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
Lesson Powerpoint and activities for learning how the different forces (COMPRESSION, TENSION, TORSION AND SHEAR) and the different types of structures shell vs frame. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and plenary (printable worksheets within powerpoint)
Lots of visual stimuli and printable resources included in powerpoint
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
Lesson Powerpoint and activities for teaching students about natural forces such as weather and how this effects structures. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. A fun topic that students enjoy- they are fascinated by natural disasters.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student research and presentation to class task (printable worksheets within powerpoint)
Exit Ticket
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
Lesson Powerpoint and activities for teaching how structures decay and about building defects. Also a few methods on how to fix the decay. This could be used in an Engineering/ Construction/ Built Environment course or as a one off lesson. This links closely to WJEC Planning and Maintaining the Built Environment.
This resource includes:
Leveled WALT and WILF (Learning Objectives)
Starter, main and student task where they can look for defects at their school (printable worksheets within powerpoint)
Lots of visual stimuli
This lesson is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop :)
A good stater activity which uses riddles to help students learn key words related to structures and buildings. Answers provided.
This activity is part of a whole unit of work on Structures and the Built Environment which can be purchased as a bundle in my shop or used on its own.