Hero image

Dave Jones

Average Rating5.00
(based on 9 reviews)

Hello, I trained as an industrial designer, then found myself training as a D&T teacher (great choice!). I've been at it for nearly 20 years now. I was a subject leader for 10 years, leading one of only 10 schools in the country to be recognised by the SSAT as leading edge for D&T. I'm also a past recipient of the DATA annual awards for leadership. I am now in senior leadership, but still teach D&T to KS3,KS4 & KS5 weekly. All resources are well designed, and do what they say on the tin!

70Uploads

17k+Views

19k+Downloads

Hello, I trained as an industrial designer, then found myself training as a D&T teacher (great choice!). I've been at it for nearly 20 years now. I was a subject leader for 10 years, leading one of only 10 schools in the country to be recognised by the SSAT as leading edge for D&T. I'm also a past recipient of the DATA annual awards for leadership. I am now in senior leadership, but still teach D&T to KS3,KS4 & KS5 weekly. All resources are well designed, and do what they say on the tin!
D&T Cover work: LEGO Minifigure Design
davjonesdavjones

D&T Cover work: LEGO Minifigure Design

(1)
Double sided A4 sheet which guides students through the design of a LEGO style minifigure, they then design a sustainable carton based packagaing net to sell them through. Fill a double lesson with a non specialist. Best with Year 7 and 8.
D&T Cover work: Future Product Design
davjonesdavjones

D&T Cover work: Future Product Design

(1)
A series of 4 x A4 sheets which guide children through the design of a future product by category with some inspirational images. Each takes around a period. Great for non specialist cover.
GCSE (D&T) Design & Technology NEA Guide (AQA)
davjonesdavjones

GCSE (D&T) Design & Technology NEA Guide (AQA)

(1)
This is a printable guide booklet to give to children which guides them through all sections of the NEA. Each page gives a doodle of what their sketchbook or PowerPoint slide should look like, along with guidance as to what to include in order to meet the mark scheme needs. The booklet is tried and tested, and I have used this format for many years with great success. This booklet is written specifically for AQA GCSE D&T (latest spec). Included is a fully editable version (made in PowerPoint), which you could easily modify to OCR etc. too if you so wished. I have also included a printable booklet of the mark scheme for students and teachers (just a cut down version of the specification), which I find handy for marking, and also a deadline poster for display in the department. This guide will work with any contextual challenge.
D&T KS3 Cover Work Bundle
davjonesdavjones

D&T KS3 Cover Work Bundle

7 Resources
All sets are stand alone sheets suitable for non specialists to print and distribute. Could be used for remote home learning too, and some for blended learning.
GCSE D&T Revision: Exam Question Countdown Calendar 2023 (AQA)
davjonesdavjones

GCSE D&T Revision: Exam Question Countdown Calendar 2023 (AQA)

(2)
Every year I make a countdown calendar for year 11, which commences the day after Easter holidays (when the NEA is complete - or hopefully is!). It’s 3 sheets of A4 that I encourage them to pin up at home in the kitchen. Then I request that they answer one question every day whilst they are making their breakfast. It often inspires them to look deeper into the keywords which invariably brings about deeper revision elsewhere in their week. It’s always a success with the students. A printable PDF along with the original Powerpoint are included, so you can edit the questions. There is a theory slide in there too, (linked to the EEF research) that goes through the best revision methods in a D&T context. The questions are set up for the AQA exam, but the questions would work with any exam board!
D&T KS3: Architecture (Structures, Materials, Design, CAD, Card modelling, Group presentation)
davjonesdavjones

D&T KS3: Architecture (Structures, Materials, Design, CAD, Card modelling, Group presentation)

(0)
A KS3 project for either year 7 or year 8, with all presentations, booklet (including differentiated version) and scheme of learning mapped to PoS. Main focus of students: 1 - Investigate structure theory (tension / compression) through practical means and associated theory (CAD files included). 2 - Investigate material properties (wood, metal, composites). 3 - Design and then develop a small building for a school site (a stand alone study space). Initially individually, and then develop CAD models and card models as a small group. 3 - Present concept to rest of group, including ‘observation cards’ for presentations. Editable powerpoints and booklet enclosed.
D&T Cover Work: Isometric Lego Bundle
davjonesdavjones

D&T Cover Work: Isometric Lego Bundle

5 Resources
A bundle of worksheets based on Lego Mini models (simple Lego models). Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.
GCSE D&T Revision: Exam Question Countdown Calendar 2024 (AQA) KS4
davjonesdavjones

GCSE D&T Revision: Exam Question Countdown Calendar 2024 (AQA) KS4

(0)
Every year I make a countdown calendar for year 11, which commences the day after Easter holidays (when the NEA is complete - or hopefully is!). It’s 3 sheets of A4 that I encourage them to pin up at home in the kitchen. Then I request that they answer one question every day whilst they are making their breakfast. It often inspires them to look deeper into the keywords which invariably brings about deeper revision elsewhere in their week. It’s always a success with the students. A printable PDF along with the original Powerpoint are included, so you can edit the questions. There is a theory slide in there too, (linked to the EEF research) that goes through the best revision methods in a D&T context. The questions are set up for the AQA exam, but the questions would work with any exam board! Tes paid lice
D&T: Skill Stick  (KS3) Joints - Woodwork & Metalwork
davjonesdavjones

D&T: Skill Stick (KS3) Joints - Woodwork & Metalwork

(0)
This resource is a 7 week module of 2 hour lessons aimed at year 9 children (but would be suitable for able year 8 children, or for foundation skills in GCSE). This resource includes an editable and printable A4 work booklet (word format) and 7 editable PowerPoints, including within all theory needed, and home learning too. Alongside this are accompanying files for laser cutting the joint tags, and a 2D design file of each joint drawn up in isometric and rendered. You will need to install the font ‘Drafting’ (free download: https://www.dafont.com/drafting.font) Materials needed: 1.2mm sheet aluminium Recycled pallet wood for the backing boards, 3mm MDF for the name tags, 1mm sheet steel 15mm steel tube Recycled aluminium for the sand casting 15mm pine for all wooden joints. Screws / brass and glue as needed. All is sourced from K&M Wholesale. Outcomes are great, and there is significant learning throughout.
D&T: Mechanism investigation - Hand helicopters
davjonesdavjones

D&T: Mechanism investigation - Hand helicopters

(0)
Worksheet (double sided A4) walks you through an investigation into the scientific principles of helicopters. It keeps it simple, but is a good first example of iterative design and performance improvement. Also needed: a small dowel or sharpened square stick (could even be a pencil); pencil sharpener; a small strip of plastic - vacuum forming plastic is perfect (HIPS), or even a sliced up milk bottle, and a hole punch. I have used this for transition day activity (year 6/7) for years and lasts around 40-60 minutes. Could be stretched to an hour. Could be used in KS3 too.
KS5 D&T Theory: Inclusive Design
davjonesdavjones

KS5 D&T Theory: Inclusive Design

(0)
Powerpoint designed to support the teaching of Inclusive Design 21 slides including starter/consolidation tasks along with a case study summarising exercise.
KS5 D&T Theory: Intellectual Property
davjonesdavjones

KS5 D&T Theory: Intellectual Property

(0)
Powerpoint designed to cover the required theory for IP within A-level D&T. Patents Registered Designs Copyright Trademarks Combinations How to apply & examples 13 slides - lesson includes spaced retrieval / starter and consolidation activities.
KS4 D&T Theory: Scales of Production
davjonesdavjones

KS4 D&T Theory: Scales of Production

(0)
11 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question. Main focus of lesson is a production line activity manufacturing a small laser cut slot together rocket as a class, then packaging in a carton. All CAD files (2D design) are enclosed to make up the parts.
KS3: D&T - Drawing Skills (Crating, Primitives, Rendering, Isometric, Modelling, 2PP, Baseline Test)
davjonesdavjones

KS3: D&T - Drawing Skills (Crating, Primitives, Rendering, Isometric, Modelling, 2PP, Baseline Test)

(0)
A KS3 project designed to be an induction year 7 project for all students. A ‘Baseline Test’ if you wish through practical means. Includes all presentations, booklet and scheme of learning mapped to PoS. Main focus of students: 1 - Introduction (and infographics) 2 - Sketching with crating 3 - Sketching with primitives 4 - Isometric Drawings 5 - Rendering in pastel with templates 6 - Moodboards and designer influences 7 - Pulling it all together. 8 - Foam Modelling 9 - More Foam Modelling 10 - 2 Point Perspective & Evaluations Editable powerpoints, and booklet enclosed (including differentiated version). Video on pastel rendering included. Drawing examples (not essential) are made in ‘artrage’.
D&T: Wooden laminated box project - year 7/8 - resistant materials / woodwork (full project - free)
davjonesdavjones

D&T: Wooden laminated box project - year 7/8 - resistant materials / woodwork (full project - free)

(0)
Provided free as a sample of what my project packs are like. All I ask is that you drop a review back as to what you think of the resource. If you like it, and my style, please have a look at my other materials. This does NOT have editable booklets, nor assessment sheets, but does include all (editable) powerpoints, along with schemes of learning etc. A version of this with editable files is available through my shop for a few pounds. You will need to install the font ‘Drafting’ (free download: https://www.dafont.com/drafting.font) A modern take on a classic woodwork project, creating a laminated curved lid pine box. This is a sequence of 7 lessons, each 2 hours long, with full powerpoint to accompany all learning. The lessons have a work booklet to complete, and also a modified version for SEND students. There are extra step by step guide sheets to help too. Materials needed: 2 of 210mm x 70mm x 15mm pine, flexi/aero/bendy ply sheet and some thin normal ply. Outcomes are great, and there is significant learning throughout.