Hero image

Gstephenson84's Shop

Average Rating3.50
(based on 97 reviews)

Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic. Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.

271Uploads

114k+Views

63k+Downloads

Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic. Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
New AQA C10.4 (New GCSE Spec 4.10 - exams 2018) – Alternative methods of extracting metals (HT ONLY)
gstephenson84gstephenson84

New AQA C10.4 (New GCSE Spec 4.10 - exams 2018) – Alternative methods of extracting metals (HT ONLY)

(0)
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources) Lesson: C10.4 – Alternative methods of extracting metals (HIGHER ONLY) Specification points covered = 4.10.1.4 - Alternative methods of extracting metals (HT Only) A fully resourced lesson about alternative methods of extracting metals, in particular the lesson looks at bleaching and phytomining to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5 - Using resources). Fully resourced with differentiated tasks and activities shown on power point slides.
New AQA C10.11 (New GCSE Spec 4.10 - exams 2018) – Production and uses of NPK fertilisers (TRIPLE)
gstephenson84gstephenson84

New AQA C10.11 (New GCSE Spec 4.10 - exams 2018) – Production and uses of NPK fertilisers (TRIPLE)

(1)
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources) Lesson: C10.11 – Production and uses of NPK fertilisers (TRIPLE ONLY) Specification points covered = 4.10.4.2 - Production and uses of NPK fertiliser A fully resourced lesson about production and uses of fertilisers to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5 - The Earth's resources). Fully resourced with differentiated tasks and activities shown on power point slides.
New AQA C10.7 (New GCSE Spec 4.10 - exams 2018) – Corrosion and its prevention (TRIPLE ONLY)
gstephenson84gstephenson84

New AQA C10.7 (New GCSE Spec 4.10 - exams 2018) – Corrosion and its prevention (TRIPLE ONLY)

(1)
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources) Lesson: C10.7 – Rusting and its prevention (TRIPLE ONLY) Specification points covered = 4.10.3.1 - Corrosion and its prevention A simple, easy to follow lesson about rusting and the prevention of rusting to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE (Paper 2 Topic 5- exams 2018) – The Earth's resources (4.10) ALL LESSONS
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 2 Topic 5- exams 2018) – The Earth's resources (4.10) ALL LESSONS

(4)
AQA Chemistry New GCSE Spec (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10) ALL LESSONS to cover both combined (trilogy) and Separate (Chemistry only) routes All lessons to cover topic 10 (paper 2, topic 5) – The Earth's resources, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and separate specification points: 4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson) 4.10.1.2 - Potable water (C10.2 lesson) Required practical 8 (C10.2 lesson) 4.10.1.3 - Waste water treatment (C10.3 lesson) 4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson) 4.10.2.1 - Life cycle assessment (C10.5 lesson) 4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson) TRIPLE Chemistry only specification points: 4.10.3.1 - Corrosion and its prevention (C10.7 lesson) 4.10.3.2 - Alloys as useful materials (C10.8 lesson) 4.10.3.3 - Ceramics, polymers and composites (C10.9 lesson) 4.10.4.1 - The Haber process (C10.10 lesson) 4.10.4.2 - Production and uses of NPK fertilisers (C10.11 lesson)
AQA C6.2 (New GCSE Spec 4.6 - exams 2018) – Collision theory and factors affecting rate of reaction
gstephenson84gstephenson84

AQA C6.2 (New GCSE Spec 4.6 - exams 2018) – Collision theory and factors affecting rate of reaction

(1)
AQA C6 (New GCSE Spec – Unit 4.6 – The rate and extent of chemical changes) Lesson: C6.2 – Collision theory and factors affecting rate of reaction Specification points covered = 4.6.1.2 - Factors which affect the rate of chemical reactions 4.6.1.3 - Collision theory and activation energy A fully resourced lesson about collision theory and factors affecting the rate of reaction to be used when teaching the New specification of AQA C6 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C3.5 (New Spec - exams 2018) - Using moles to balance equations & limiting reactants
gstephenson84gstephenson84

AQA C3.5 (New Spec - exams 2018) - Using moles to balance equations & limiting reactants

(2)
AQA C3 (New Spec – Unit 4.3 – Quantitative chemistry) Lesson: C3.5 - Using moles to balance equations and limiting reactants Specification points covered = 4.3.2.3 Using moles to balance equations (Higher tier) 4.3.2.4 Limiting reactants (Higher tier) A fully resourced lesson about Using moles to balance equations and limiting reactants to be used when teaching the New specification of AQA C3 (Paper 1, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10 - TRILOGY ONLY LESSONS)
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10 - TRILOGY ONLY LESSONS)

6 Resources
AQA Chemistry New GCSE Spec (Paper 2 Topic 5 - exams 2018) – The Earth's resources (4.10 - TRILOGY ONLY LESSONS) All lessons to cover the combined science: Trilogy route of topic 10 (paper 2, topic 5) – The Earth's resources(exams 2018). The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: 4.10.1.1 - Using the Earth's resources and sustainable development (C10.1 lesson) 4.10.1.2 - Potable water (C10.2 lesson) Required practical 8 (C10.2 lesson) 4.10.1.3 - Waste water treatment (C10.3 lesson) 4.10.1.4 - Alternative methods of extracting metals (HT ONLY) (C10.4 lesson) 4.10.2.1 - Life cycle assessment (C10.5 lesson) 4.10.2.2 - Ways of reducing the use of resources (C10.6 lesson
AQA Chemistry Paper 2 GCSE (Combined/Trilogy) Revision power point
gstephenson84gstephenson84

AQA Chemistry Paper 2 GCSE (Combined/Trilogy) Revision power point

(2)
This is a revision power point to be used when revising the content of AQA Chemistry paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams. The power point includes: An overview of all topics on paper 2 Chemistry Recap of the required practical activities Information slides to quickly recap areas of paper 2 Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able. One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others. The main topic areas that are covered on this revision power point are : Rates of reaction - with required practical on this Collision theory Catalysts Equilibrium Separation Chromatography - with required practical Crude oil Fractional distillation alkanes cracking the atmosphere pollution the greenhouse effect human impact potable water purifying water life cycle assessments Amongst many other areas covered
New AQA C10.1 (New GCSE Spec 4.10 - exams 2018) – The Earth's resources and sustainable development
gstephenson84gstephenson84

New AQA C10.1 (New GCSE Spec 4.10 - exams 2018) – The Earth's resources and sustainable development

(1)
AQA C10 (New GCSE Spec – Unit 4.10 – Using Resources) Lesson: C10.1 – Using the Earth's resources and sustainable development Specification points covered = 4.10.1.1 - Using the Earth's resources and sustainable development A fully resourced lesson about using the Earth's resources and sustainable development to be used when teaching the New specification of AQA C10 (Paper 2, Topic 5). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7.8 (New Spec 4.7 - exams 2018) - Addition Polymerisation (Triple only)
gstephenson84gstephenson84

AQA C7.8 (New Spec 4.7 - exams 2018) - Addition Polymerisation (Triple only)

(0)
AQA C7 (New Spec – Unit 4.7 – Organic chemistry) Lesson: C7.8 - Addition polymerisation (Triple only) Specification points covered = 4.7.3.1 – Addition polymerisation A fully resourced lesson about addition polymerisation to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) ALL LESSONS
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) ALL LESSONS

(5)
AQA Chemistry New Spec (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) AQA Chemistry New Specification! All lessons to cover topic 5 (paper 1, topic 5) – Energy Changes, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4) 4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task) 4.5.1.2 – Reaction profiles (C5.2 lesson) 4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson) Chemistry Triple science specification points and lessons: 4.5.2.1 – cells and batteries (C5.3 lesson) 4.5.2.2 - Fuel Cells (C5.4 lesson)
AQA New GCSE Chemistry (Exams 2018) - Entire Paper 1 resource pack
gstephenson84gstephenson84

AQA New GCSE Chemistry (Exams 2018) - Entire Paper 1 resource pack

5 Resources
AQA Chemistry New GCSE Spec Entire resources to cover all content in paper 1 of the new GCSE specifications. All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics. Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. Specification points covered are: Topic 1 - Atomic structure and the periodic table: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Topic 2 - Bonding structure and the properties of matter: 4.2.1.1 – Chemical bonds 4.2.1.2 – Ionic bonding 4.2.1.3 – Ionic compounds 4.2.1.4 – Covalent bonding 4.2.1.5 – Metallic bonding 4.2.2.1 – Three states of matter 4.2.2.2 – State symbols 4.2.2.3 – Properties of ionic compounds 4.2.2.4 – Simple covalent substances 4.2.2.5 – Polymers 4.2.2.6 – Giant covalent substances 4.2.2.7 – Properties of metals and alloys 4.2.2.8 – Metals as conductors 4.2.3.1 – Diamond 4.2.3.2 – Graphite 4.2.3.3 – Graphene and fullerenes Chemistry Triple science lessons: 4.2.4.1 – Sizes of particles and their properties 4.2.4.2 – Uses of nanoparticles Topic 3 - Quantitative Chemistry: 4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson) 4.3.1.2 – Relative formula mass (C3.2 lesson) 4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson) 4.3.2.1 – Moles (Higher tier) (C3.3 lesson) 4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson) 4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson) 4.3.2.4 – Limiting reactants (HT) (C3.5 lesson) 4.3.2.5 – Concentration of solutions (C3.6 lesson) Chemistry Triple science specification points and lessons: 4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson) 4.3.3.1 – Percentage yield (C3.8 lesson) 4.3.3.2 – Atom economy (C3.9 lesson) 4.3.5 – Molar volume of gases (HT) (C3.10 lesson) Topic 4 - Chemical changes 4.4.1.1 - Metal Oxides (C4.1 lesson) 4.4.1.2 - The reactivity series (C4.1 lesson) 4.4.1.3 - Extraction of metals and reduction (C4.2 lesson) 4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson) 4.4.2.1 - Reactions of acids with metals (C4.4 lesson) 4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson) 4.4.2.3 - Soluble salts (C4.5 lesson) 4.4.2.4 - The pH scale and neutralisation (C4.6) 4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2) 4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson) 4.4.3.1 - The process of electrolysis (C4.9 lesson) 4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson) 4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson) 4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson) 4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson) 4.4.3.4 - Required practical 3 (C4.11 lesson) Topic 5 - Energy Changes: 4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4) 4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task) 4.5.1.2 – Reaction profiles (C5.2 lesson) 4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson) Chemistry Triple science specification points and lessons: 4.5.2.1 – cells and batteries (C5.3 lesson) 4.5.2.2 - Fuel Cells (C5.4 lesson)
AQA C2 - Ionic compounds and ionic formulae
gstephenson84gstephenson84

AQA C2 - Ionic compounds and ionic formulae

(0)
AQA C2.3 - Writing ionic formulae. A full lesson about how to write ionic formula to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
Edexcel C3 Lessons - Fully resourced power points covering the entire C3 unit for edexcel
gstephenson84gstephenson84

Edexcel C3 Lessons - Fully resourced power points covering the entire C3 unit for edexcel

(0)
A full set of power points that guides learners through every lesson in the Edexcel C3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4
AQA Chemistry New GCSE (Paper 1 Topic 1- exams 2018)  - Atomic structure + the periodic table (4.1)
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 1 Topic 1- exams 2018) - Atomic structure + the periodic table (4.1)

(3)
AQA Chemistry New Specification! All lessons to cover topic 1 (paper 1) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Specification points covered: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
AQA C2.6 (4.2 – Bonding and properties) (New Spec - exams 2018) - Giant covalent properties
gstephenson84gstephenson84

AQA C2.6 (4.2 – Bonding and properties) (New Spec - exams 2018) - Giant covalent properties

(1)
AQA C2.6 (new spec - 4.2.6 - paper 1, topic 2 new spec) - Properties of giant covalent substances A fully resourced lesson about the properties of giant covalent substances to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.