After a PhD in Medicinal Chemistry and some time in industry; I finally found my calling as a secondary school teacher in Chemistry.
Enjoy!
Please review the resources you buy in order for me to improve my teaching and my lessons
After a PhD in Medicinal Chemistry and some time in industry; I finally found my calling as a secondary school teacher in Chemistry.
Enjoy!
Please review the resources you buy in order for me to improve my teaching and my lessons
Edexcel CC8 Acid and Alkalis for the new 9-1 GCSE
TOPIC 3 Chemical changes PAPER 1- NEW for SEPTEMBER 2017
Learning objectives:
To compare methods of preparing soluble salts
To be able to prepare a soluble salt from an acid and a soluble reactant (alkali)
To consolidate learning with questions
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
Main topics include:
- What happens to the ions from acids and alkalis during neutralisation
- What is a titration
- How do we make a soluble salt using titration
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!!
AQA A level 3.2.4: Periodicity
3.2.4 Properties of Period 3 elements and their oxides
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
LESSON 1
Objectives:
To recap the properties of Period 3 elements from AS
To describe the trends in the reactions of Period 3 elements with water (limited to Na and Mg)
To describe the trend in the reactions of the of the elements Na, Mg, Al, Si, P ad S with O2 Limited to the formation of Na2O, MgO, Al2O3, SiO2, P4O10 and SO2
LESSON 2:
To predict the trends
To explain the link between the physical properties of the highest oxides of the elements sodium to sulfur in terms of their structure and bonding
To consolidate with questions
LESSON 3:
To be able to describe the reactions of the oxides of elements from sodium to sulfur
To know the changes in pH of the resulting solutions across Period 3
To be able to write equations for the reactions that occur between these oxides and simple acids and bases
To be able to explain the trend in these properties in terms of the types of bonding present.
Homework booklet with answers
Leave feedback and enjoy !!
AQA AS Level Unit 1 Section 7 Oxidation, reduction + REDOX equations unit- Ionic, oxidation states
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Fully explained methods for ionic equations and all answers explained in great detail - all about oxidation states and ionic reactions a large amount of work has been put in to ensure everything is explained to the highest standards.
Oxidation, reduction + REDOX equations unit- Ionic, oxidation states:
LESSON 1:
Objectives:
To recap what is meant by ‘oxidation’ and ‘reduction’
To know what an oxidation state is
To be able to calculate an oxidation state of an element in a compound
LESSON 2 + 3
Objectives:
To be able to write half equations from balanced equations
To be able to combine half equations to make the overall balanced redox equation
To understand the terms oxidising agent and reducing agent
LESSON 4:
Optional practicals (2p)
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel 9-1 Chemistry formulas
All the formulas contained with the SEPARATE science topics condensed into one table.
Students can stick this in their books
A mini test is also present, students can be tested regularly throughout the year to check if they are revising or SIMPLY ADD THE FORMULAS AS YOU GO
Enjoy !!!!
PLEASE LEAVE FEEDBACK and REVIEWS
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
AQA A2 Level Electochemical cells (3.1.11) - Electrochemical series complete lesson package
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
You will need a membership to Chemsheets - doesn’t have to be used with chemsheets
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Very detailed- will not suit everyone (hidden slides are extras depending on ability of class)
3.1.11 Electrochemical cells
3.1.11.1 Electrode potentials and cells
3.1.11.2 Commercial applications of electrochemical cells
LESSON 1: Recap
L1- Oxidation and Reduction from AS-Level
AS LINK https://www.tes.com/teaching-resource/resource-12099917
Exam Q
Objectives:
To familiarize yourselves with the key concepts of oxidation states from AS Chemistry
To recap redox reactions
To recall the terms oxidising agent and reducing agent
L1b Exam question consolidation *
L2a Electrochemical cells PART 1
The potential of an electrode
To know the importance of the conditions when measuring the electrode potential, E (Nernst equation not needed)
To understand how cells are used to measure electrode potentials by reference to standard hydrogen electrode
L2b Electrochemical cells PART 2
The secondary standard
The Daniell cell and representing electrochemical cells
To add a sign to the cell voltage on cell diagrams
To understand what happens to the emf when changing conditions
L3 PRACTICAL
Method, questions, results (no tech sheet)
L4 PRACTICAL - varying concentration
Method, questions and results (no tech sheet)
L5 The electrochemical series
To know that standard electrode potentials are listed in an electrochemical series
To work out overall equations by using the electrochemical series
To use the electrochemical series to predict the direction of simple redox reactions
To choose a suitable RAD or OAT
L5c Exam question consolidation * LINK BELOW
L5d Redox Titrations and electrochemical cells
To understand why HCl cannot be used in certain redox titrations
To understand why some spontaneous reactions do not occur
To understand how to determine the species present in solution at the end of the reaction
L6 + 7 Applying electrochemistry (working alongside L7b Exam question consolidation) *
To understand that electrochemical cells can be used as a commercial source of electrical energy, and that cells can be non-rechargable (irreversible), rechargable or fuel cells
To be able to use given electrode data to deduce the reactions occurring in non-rechargeable and rechargeable cells and to deduce the e.m.f. of a cell
To explain how some cells can be recharged
To explain how a hydrogen fuel cell works
Understand the electrode reactions of a hydrogen-oxygen fuel cell and appreciate that a fuel cell does not need to be electrically recharged
Evaluate the benefits and risks associated with uses these cells.
L8 REQUIRED PRACTICAL 8
*can’t publish ex
Edexcel CC5 Ionic bonding for the new 9-1 GCSE
Edexcel CC6 Covalent bonding for the new 9-1 GCSE
Edexcel CC7 Types of substance for the new 9-1 GCSE
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
Covering on the Mat:
CC5a Ionic bonds
CC5b Ionic lattices
CC5c Properties of ionic compounds
CC6a Covalent bonding
CC7a Molecular compounds
CC7b Allotropes of Carbon
CC7c Properties of metals
CC7d Bonding models
Revision mat summary sheet
Revision mat summary sheet answers for the teacher
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
AQA AS Level Unit 3 Section 4 Organic analysis: Infrared, High resolution mass spec, Required prac 6- test tube reactions
3.3.6 Organic analysis 3.3.6.1 Identification of functional groups by test-tube reactions
LESSON 1: Required practical 6:
Objectives:
To understand how to test for different functional groups
To carry out test-tube reactions to distinguish between alcohols, aldehydes, alkenes and carboxylic acids
To interpret observations from these reactions and write equations for these reactions
3.3.6 Organic analysis 3.3.6.2 Mass spectrometry
LESSON 2: HRMS
Objectives:
To know what a molecular ion is
To know what a molecular ion shows
To explain what a high resolution mass spectrum can show
3.3.6 Organic analysis 3.3.6.4 Infrared spectroscopy
LESSON 3: Infra-red mass spec
Objectives:
To understand how an intra-red spectrometer works
To identify functional groups from intra-red spectra and what the fingerprint region and where it is found
To understand the link between absorption of infrared radiation by bond in CO2, methane and water vapour and global warming
PLENARY GAME
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel 9-1 CC11 Revision MAT / SHEET for Obtaining and using metals
TOPIC 4 Extracting metals and Equilibria PAPER 1 - NEW for SEPTEMBER 2017
PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE
2 mats in total
REVISION MATs - PART 1, 2 (with MOST answers - others are self-explanatory) for CC11
USED FOR REVISION OF Obtaining and using metals
Main topics include:
Reactivity series,
Metals,
Ores,
Pure substances
Mining,
Extraction,
Oxidation
Reduction
OIL RIG
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!
PLEASE LEAVE FEEDBACK and REVIEWS
AQA AS Level Unit 1 Section 6 Equilibria-Catalysts, Chemical equilibria, Le Chatelier’s principle and Kc
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 1 Section 6: 3.1.6 Chemical equilibria, Le Chatelier’s principle and Kc
3.1.6.1 Chemical equilibria and Le Chatelier’s principle
LESSON 1:
Objectives:
To understand how reversible reactions can reach a state of dynamic equilibrium
To understand Le Chatelier’s principle
To apply Le Chatelier’s principle to reversible reactions
LESSON 2: Equilibrium and Industry
Objectives:
To explain why compromises are made for the production of ammonia
To explain why compromises are made for the production of Ethanol
To explain why compromises are made for the production of Methanol
Unit 1 Section 6: 3.1.6 Chemical equilibria, Le Chatelier’s principle and Kc3.1.6.2 Equilibrium constant Kc for homogeneous systems
LESSON 3:
Objectives:
To understand what the Equilibrium Constant, Kc is
To write an expression for Kc including units
To calculate Kc including units
LESSON 4:
Objectives:
To understand how to work out moles at equilibrium
To calculate Kc after calculating moles
To know how to use Kc to work out the composition of an equilibrium mixture
To know how to use Kc to calculate the amount of reactant needed
LESSON 5:
Objectives:
To predict the effect, if any, of the changes in conditions on the value of Kc
To predict qualitatively how the value of Kc will change, if at all, as the position of an equilibrium moves as conditions are changed
To consolidate learning
Homework booklet with answers
Leave feedback and enjoy !!
AQA AS Level Unit 1 Section 5 Kinetics -Collision theory, Maxwell-Boltzmann distribution, catalysts
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Unit 1 Section 5: 3.1.5 Kinetics3.1.5.1 Collision theory
LESSON 1:
Objectives:
To recall why reactions take place
To be able to calculate rates from a graph
To define the term activation energy and understand the significance
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.2 Maxwell–Boltzmann distribution 3.1.5.3 Effect of temperature on reaction rate
LESSON 2:
Objectives:
To interpret and draw Maxwell-Boltzmann distribution
To explain how temperature affects the number of molecules with energy equal to or more than the activation energy
To use the collision theory to explain the effect of temperature on the rate of reaction
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.3 Effect of temperature on reaction rate PART OF IT 3.1.5.4 Effect of concentration and pressure
LESSON 3:
Objectives:
To complete worksheets on Maxwell-Boltzmann distributions
To use collision theory, including diagrams to explain why an increase in solution concentration/pressure leads to an increase in reaction rate
To draw Maxwell-Boltzmann distributions for concentration and pressure
Unit 1 Section 5: 3.1.5 Kinetics 3.1.5.3 Effect of temperature on reaction rate 2nd part
LESSON 4: REQUIRED PRACTICAL 3
Objectives:
To understand how to measure rates of reaction
To investigate how the rate of the reaction of sodium thiosulfate with hydrochloric acid changes as the temperature of the reaction is changed.
To evaluate the practical
Unit 1 Section 5: 3.1.5 Kinetics3.1.5.5 Effect of catalysts
LESSON 5: Catalysts
OBJECTIVES
Objectives:
To define the term catalyst
To draw a reaction profile to show the impact of a catalyst on Ea
To draw a Maxwell-Boltzmann distribution curve to and use it to explain how a catalyst increases reaction rate
Homework booklet with answers
Leave feedback and enjoy !!
KS3 Unit 8c Biology - Respiration
Aimed for High and Low ability Year 8 - there are different slides in the same powerpoint when relating to either high or low ability (they have different tasks)
It can be adapted whatever class you have
Further to this the lessons can also be split further - but due to time constraints; I was able to get through it all in 6 lessons rather than 8 lessons
8Cb: The gas exchange system
Lesson 1- The lungs (the lungs, cilia-specialised cells)
To describe the structure of the lungs
To use a model to explain breathing
To explain how specialised cells keep the lungs clean
Lesson 2 - Diffusion and gas exchange
To explain how diffusion occurs
To explain how the lungs are adapted for efficient gas exchange
To observe a lung dissection
8Cc: Exercise and smoking
Lesson 3 - Exercise
To understand the term ‘pulse rate’
To explain the changes in heart rate and breathing rate during exercise
To conclude and evaluate the results
Lesson 4 - Smoking
To explain the circulatory system
To explain the effects of the harmful chemicals in tobacco smoke on the body
To describe how asthma, emphysema and tobacco tar can reduce gas exchange
8Cd: Aerobic respiration
Lesson 5 - Aerobic respiration (process, word/symbol equations) higher and lower lesson
To know where respiration happens
To be able to write the word (and symbol) equation for respiration
To describe ways in which respiration can be detected
Lesson 6: Comparing gas exchange
To describe how gas exchange occurs in plants
To describe how gas exchange occurs in fish
To compare and contrast the gas exchange systems of plants and other animals
8Ce: Anaerobic respiration
Lesson 6 - Anaerobic respiration
To explain the difference between aerobic and anaerobic respiration
To model anaerobic respiration using a word equations
To explain why anaerobic activity cannot be sustained
7 lessons including practicals
(can be split to 8 if required but not needed for last lesson)
Targeted towards specification
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying - more sheets than usual required in this section of work
HIGHER AND LOWER WORK AVAILABLE ON EACH SLIDE
Enjoy !!!
PLEASE LEAVE FEEDBACK and REVIEWS
Edexcel CC5 Ionic bonding for the new 9-1 GCSE
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
For students struggling with ION formation, ionic bonding, writing ionic formulae and naming ionic compounds
This is built for even high ability students but for mainly lower sets struggling with the concept
This lesson was taught over a double science lesson and therefore can be split into 2 lessons for lower ability
Learning objectives:
To recall how to form an ion
To be able to explain how ionic bonds are formed
To be able to name and write formulas for ionic bonds
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
Main topics include:
- Ionic bonds
- metals and non metals
- Electronic configuration
-writing ionic formulae
-naming ionic compounds
- ionic bonding
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!!
Please leave a comment and rate
Edexcel CC2 Separating methods for the new 9-1 GCSE
TOPIC 2 PAPER 1 - NEW for SEPTEMBER 2017
Attached is a PowerPoint along with a student guide were students can track their progress
Learning objectives CORE PRACTICAL
To know what distillation is
To be able to carry out an experiment investigating the composition of inks using simple distillation
To understand the differences between simple and fractional distillation
Learning objectives: ANALYSIS
To be able to describe how paper chromatography can be used to separate mixtures
To be able identify a mixture and a pure substance on a chromatogram
To understand how to calculate Rf values from a chromatogram
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
Main topics include:
- Simple Distillation
- Fractional distillation
-Summary questions
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!!
Please leave a comment and rate
KS3 Scheme of work and lessons for Unit 7J Physics - Forces (year 7)
Aimed for High ability Year 7 but can be adapted for low/middle ability if required
7Ka: Forces
Lesson 1- Forces introduction (Types and non/contact)
Lesson 2 - Forces Part 2 (Force meter, arrow size/length and mass vs weight)
7Kb Spring (Hooke's Law)
Lesson 3 - Hooke's Law Theory and practical (stretching a spring and plotting a graph)
Lesson 4 - Hooke's Law Evaulation and Calculations (concluding/evaluating the practical and calculations)
7Kc Friction and Draw
Lesson 5 -Friction lesson
Lesson 6 - Friction BONUS LESSON practical (with practical mats diferentiated) - what material is best worn down a slide
7Kd Pressure
Lesson 7 - Pressure (What is pressure and calculations)
7Ke Balanced and Unbalanced forces
Lesson 8 - Balanced and unbalanced forces (including resultant force)
8 lessons including practicals
Targeted towards specification
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
Enjoy !!!!
PLEASE LEAVE FEEDBACK and REVIEWS
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
AQA AS and A level REQUIRED PRACTICAL Teacher Checklists
Common Practical Assessment Criteria
These documents allow you to write your class list across the top and mark the criteria during the lesson and after the lesson
EITHER:
RED, AMBER and GREEN assessment
Tick/cross method
1-10 marking
can be used to see how successful the student is as the specific CPAC.
PRACTICAL 1: Make up a volumetric solution and carry out a simple acid-base titration
PRACTICAL 2: Measurement of an enthalpy change
PRACTICAL 3: Investigation of how the rate of a reaction changes with temperature
PRACTICAL 4: Carry out simple test-tube reactions to identify cations and anions in aqueous solution
PRACTICAL 5: Distillation of a product from a reaction
PRACTICAL 6: Tests for alcohol, aldehyde, alkene and carboxylic acid
PRACTICAL 7a: Measuring the rate of reaction by an initial rate method
PRACTICAL 7b: Measuring the rate of reaction by a continuous monitoring method
PRACTICAL 8: Measuring the EMF of an electrochemical cell
PRACTICAL 9: Investigate how pH changes when a weak acid reacts with a strong base and when a strong acid reacts with a weak base
PRACTICAL 10a: Preparation of an organic solid and a test of its purity
PRACTICAL 10b: Preparation of a pure organic liquid
PRACTICAL 11: Carry out simple test-tube reactions to identify transition metal ions in aqueous solution
PRACTICAL 12: Separation of species by thin-layer chromatography
EXPLAINING CPAC:
In order to achieve a pass, students will need to have met the following expectations.
Students will be expected to develop these competencies through the acquisition of the technical skills specified in Appendix 5 of the DfE subject content for each science subject Biology, Chemistry and Physics. Students can demonstrate these competencies in any practical activity undertaken throughout the course of study. The 12 practical activities prescribed in the subject specification, which cover the requirements of Appendix 5c, will provide opportunities for demonstrating competence in all the skills identified together with the use of apparatus and practical techniques for each subject.
Students may work in groups but must be able to demonstrate and record independent evidence of their competency. This must include evidence of independent application of investigative approaches and methods to practical work.
Teachers who award a pass to their students need to be confident that the student consistently and routinely exhibits the competencies listed below before completion of the A level course.
AQA AS level Unit 3 Section 3:: Alcohols
Unit 3 Section 3: Alkenes and Alcohols
AQA AS Level Unit 3 Section 3 Alcohols (Oxidation, Required practical 5 - distillation of cyclohexanol, hydration of ethene, ethanol production - fermentation and hydration of ethene)
AQA AS level Unit 3 Section 3: 3.3.4 Alkenes
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
Alkenes section
Introduction to alkenes
Lesson 1:
Objectives:
To recall what alkenes are
To understand what isomerism do alkenes display
To explain why alkenes are reactive
Electrophilic addition
Lesson 2:
Objectives:
To understand what electrophilic addition reactions are
To understand the reactions of alkenes with different electrophiles
To understand what happens with asymmetrical alkenes
Additional Polymerisation
Lesson 3:
Objectives:
To recall the terms polymer, monomer and polymerisation
To explain additional polymerisation reactions
To know some uses of polymers
Mechanism recap
Lesson 4: no powerpoint just questions
AQA AS level Unit 3 Section 3:: Alcohols
Unit 3 Section 3: Alkenes and Alcohols
AQA AS Level Unit 3 Section 3 Alcohols (Oxidation, Required practical 5 - distillation of cyclohexanol, hydration of ethene, ethanol production - fermentation and hydration of ethene)
Using the specification and books
No exam questions are included due to copy right
Including:
Homework booklets
Assessment sheets
Interactive powerpoints (rarely seen in A-level)
RSC STARTER FOR 10 CAN BE FOUND ON RSC WEBSITE
3.3.5.1 Alcohol production
LESSON 1/2
Objectives:
STARTER GCSE RECAP (separate science)
To classify alcohols
To write equations and give conditions for the production of alcohols
To compare the two methods of producing ethanol
3.3.5.2 Oxidation of alcohols
LESSON 2: PRACTICALS
Oxidation and distinguishing between aldehydes and ketones
Objectives:
To identify the products when 1o, 2o and 3o alcohols are oxidised
To understand practically how to distinguish 3o alcohols from 1o and 2o by reaction with acidified potassium dichromate(VI)
To carry out test-tube reactions to distinguish aldehydes from ketones by reaction with Tollens’ reagent and Fehling’s solution
3.3.5.3 Elimination
LESSON 3:
Objectives:
To understand what an elimination reaction is
To identify products of alcohol elimination reactions
To understand how addition polymers can be made from alkenes made this way without using monomers derived from crude oil
LESSON 4/5:
Required practical 5
Distillation of a product from a reaction.
Objectives:
To prepare cyclohexene by the dehydration of cyclohexanol and to distil the cyclohexene from the reaction mixture
To test the product to confirm the identity
To evaluate the experiment
Homework booklet with answers
Leave feedback and enjoy !!
Edexcel CC10 Electrolytic processes for the new 9-1 GCSE
TOPIC 3 Chemical changes PAPER 1- NEW for SEPTEMBER 2017
REVISION MATS - Part 1 and HIGHER STRETCH Part 2
PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE
USED FOR REVISION OF Electrolysis topics
Main topics include:
-Electroysis
- Electrolytic cell
- Set up and method
- Explain method
- Core practical - copper with inert and copper electrodes
- 1/2 equations
- Predicting products for molten and aqueous solutions
- Exam Questions
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!
PLEASE LEAVE FEEDBACK and REVIEWS
CAN BE USED FOR ABOUT 8 LESSONS
OVER 187 SLIDES
ACTIVATE - SHOWING THE FORMULA AND HOW IT WORKS
DEMONSTRATE - ALLOWING STUDENTS TO COMPLETE THE QUESTIONS
AFL - CHECKING ANSWERS (ALL ANSWERS PRESENT)
Edexcel CC9 PART 1-3 Calculations involving masses for the new 9-1 GCSE
6-8 lessons depending on how good student are at the calculations
Mainly covering
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
TOPIC 5 SEPARATE SCIENCE PAPER 1: QUANTITATIVE ANALYSIS
Touching on TOPIC 7 Bond energy calculations for the higher tier students
Powerpoint with over 187 slides including worked examples, questions for the students to complete and then the answers of the questions.
Some calculations include more than one method, to help stretch the brightest and support the lowest ability students.
There is a summary slide for each paper (Paper 1 and Paper 2- separate science/ triple science) and a calculations summary slide to show all the equations that students will need to know over the 2 separate science papers.
QUESTIONS ATTACHED TO ALLOW STUDENTS TO WORK INDEPENDENTLY OR AT THEIR OWN PACE (THEY ARE THE SAME QUESTIONS AS IN THE POWERPOINT - SO ALL ANSWERS ARE IN THE POWERPOINT) Can set as homework or use in a revision lesson.
Calculations include:
COMBINED SCIENCE…
Rf Value
Isotope Calculation (H)
Relative Formula Mass
Empirical from molecular
Molecular Formula from Empirical Formula and Mr
Empirical Formula from Reacting masses and % composition
Conservation of Mass
Reacting masses (without moles)
Concentration (g/dm3)
Moles (H)
Using Avogadro’s constant to calculate the number of atoms or molecules (H)
Reacting masses (with moles) (H)
Finding the Limiting Reagent (H)
Using the limiting reagent to calculate the mass (H)
Balancing equations (with moles) (H)
Bond Enthalpy (H)
SEPARATE SCIENCE …
Percentage yield
Reacting Masses and percentage yield
Atom Economy
Concentration (moldm-3)
Concentration – converting between moldm-3 and gdm-3
Titration equations
Molar volume of gases – with volume and masses
Please leave feedback
Edexcel 9-1 TOPIC 5 Sc15 Dynamic Equilibria + the Haber process
Edexcel 9-1 Sc16a TOPIC 5 Chemical cells and Hydrogen-oxygen fuel cells
TOPIC 5 Sc16a TOPIC 5 Chemical cells and Hydrogen-oxygen fuel cells SEPARATE TRIPLE PAPER 1
SEPARATE or TRIPLE PAPER 1
TOPIC 5 SEPARATE SCIENCE PAPER 1 - NEW for SEPTEMBER 2017
Learning objectives:
Objectives:
To know that a chemical cell produces a voltage until one of the reactants is used up
To be able to recall how a hydrogen-oxygen fuel cell functions
To evaluate the strengths and weaknesses of fuel cells for given uses
All extension questions available on each slide
Answers all underneath each slide
Support also available where necessary
AfL sections and mini quizzes
Reducing the need for photocopying
No exam questions due to copy write - in this case exam questions have been typed out
Main topics include: (H)
- Fuel cells
-Chemical cells - renewable and non-renewable batteries
- Hydrogen -oxygen fuel cells
- Strengths and weaknesses of hydrogen-oxygen fuel cells for their uses
Enjoy !!!!
PLEASE LEAVE FEEDBACK and REVIEWS
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Edexcel CC3 and 4 Atomic structure and the periodic table for the new 9-1 GCSE
TOPIC 1 KEY CONCEPTS OF CHEMISTRY PAPER 1 and PAPER 2- NEW for SEPTEMBER 2017
REVISION MAT
PLEASE NOTE - THESE MATS ARE MEANT TO BE PHOTOCOPIED AND LAMINATED FOR STUDENTS TO WORK ON PAPER (DUE TO LIMITED PHOTOCOPYING WITHIN THE DEPARTMENT CURRENTLY); THEY CAN BE ADAPTED SO STUDENTS CAN WRITE ON THEM BUT THAT IS ENTIRELY YOUR CHOICE
USED FOR REVISION OF Atoms and The Periodic Table
Main topics include:
- atoms
- Atomic structure
- Isotopes
- the perodic table
- Mendeleev
- Isotope calculations
- Ar
- Relative atomic mass
All relating to specification (any pictures used have all been taken from the internet and I am not trying to claim rights to any pictures or information used)
Enjoy !!!
PLEASE LEAVE FEEDBACK and REVIEWS