Hero image

Design Technology and Engineering Shop

Resources for all areas of Design Technology and Engineering. Lots of help and work sheets to aid lessons and build lessons around. Extension tasks and full lessons.

64Uploads

29k+Views

7k+Downloads

Resources for all areas of Design Technology and Engineering. Lots of help and work sheets to aid lessons and build lessons around. Extension tasks and full lessons.
BTEC Tech Award Engineering Component 1A Complete
dduncalfedduncalfe

BTEC Tech Award Engineering Component 1A Complete

(0)
This is a resource for the Pearson BTEC Tech Award in Engineering Component 1A. This is the research of different engineered products and the companies that come together to engineer them. This is a pack of resources around the write up of the report. There is a presentation to aid writing up the report and suggest certain companies that can be used around 4 different products, Drone, Motorcycle, Pedal Bike and Car. These have been vetted and researched to make sure all the information is available on the companies websites. There is a write up sheet for research and completed sheets around each company to help the completion of these. There is also an example report which uses different engineering sectors than the ones used by the students and has two made up companies so it cannot be copied but gives students an idea of higher expectations. There is also a help sheet which breaks down the report into manageable parts and explains what to include.
New and Emerging Technology Lessons
dduncalfedduncalfe

New and Emerging Technology Lessons

(1)
This is 2 lessons based around New and Emerging Technology. Covers: Robotics, Augmented Reality, Smart Sensors, Artificial Intelligence, The Internet of things and Autonomous Vehicles. There are 2 powerpoints each with their own information sheets for students to explore the technologies themselves and a worksheet to explain the information and the impact they might have. Good discussion lesson, engages students through teacher input and the students exploring the new technologies.
Health and Safety Posters for Workshop Machines
dduncalfedduncalfe

Health and Safety Posters for Workshop Machines

(2)
7 Workshop posters for each of the common machines in a Design and Technology Workshop. Pillar Drill, Band Saw, Belt Sander, Centre Lathe, Milling machine, Scroll saw and Shot blaster. Designed to be easy to read for students as well as factually correct using most of the HSE terms and rules. Can be mounted to boards with the official risk assessment placed behind for higher ability students.
BTEC Tech Award Engineering Component 2B Resources
dduncalfedduncalfe

BTEC Tech Award Engineering Component 2B Resources

(0)
In this pack are all the write up resources for Component 2B for the Pearson BTEC Tech Award in Engineering Level 1/2. This is based off the example work and uses the same cheap multi tool which is available cheaply from different websites. This includes a presentation with instructions on and the tasks broken down. A help sheet with the facts about the components used and help in writing the spec. There are worksheets for the observations in the photos. A reassembly guide for the multi tool. There is also a blank workbook to complete the work on paper.
BTEC Tech Award in Engineering Component 2C Manufacturing
dduncalfedduncalfe

BTEC Tech Award in Engineering Component 2C Manufacturing

(0)
This is a full resource for the Pearson BTEC Tech Award in Engineering Level 1/2 Component 2C. The making task based around the multi tool as used in the exemplar materials. In the pack is a powerpoint with multiple lessons to explain each of the tasks from production plan, manufacturing, write up and evaluation. There is a booklet to fill in with photos taken and write up about each task. A dimension sheet for the tool, help sheets for the production plans and an example. This has been used and moderated at all levels of Pearsons laid out expectations for Level 2 Pass, Merit and Distinction.
Cover work resources for Design and Technology
dduncalfedduncalfe

Cover work resources for Design and Technology

(0)
2 different resources that can be used for lessons that need to be covered last minute. 2 different design tasks. Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.
Cover work for Design and Technology Lessons
dduncalfedduncalfe

Cover work for Design and Technology Lessons

(1)
2 different resources that can be used for lessons that need to be covered last minute. One lesson based on tool knowledge and one based on wood knowledge. Have used successfully for a few years, printed out and laminated and left in a draw for when a lesson needs last minute cover. Can be used by any specialism teacher and students can work in books or on paper. Based on a hierarchy system that differentiates the outcomes from a flash task, to a hulk task and finally an incredible task for high ability students.
BTEC Engineering Tech Award Unit 2 Learning Aim A Module
dduncalfedduncalfe

BTEC Engineering Tech Award Unit 2 Learning Aim A Module

(1)
This is a series of resources for students to work through in order to complete the BTEC Engineering Tech Award Unit 2 Learning Aim A Module. The download contains a booklet that students work through and research on the internet to complete. 3 Lessons which set up the module, the research tasks and writing the report. A help sheet for the report and pictures for the product. This is based on the exemplar work that was sent out by the exam board. There are only 3 powerpoints but the lesson 2 powerpoint can be adapted to each of the research tasks. This download should cover about 30 hours when all put together.
Electronic Component Worksheets and Resources
dduncalfedduncalfe

Electronic Component Worksheets and Resources

(1)
Resources to aid the understanding of electronic components. This includes a number of cards which explain various components designed to be set up in 'stations'. Students then fill in their worksheets moving around the class to find the information. There are two worksheets one of which is differentiated for students that struggle with literacy. There is also a starter task for the next lesson or a way of consolidating the learning of the different components.
BTEC Engineering Tech Award Mock Exam
dduncalfedduncalfe

BTEC Engineering Tech Award Mock Exam

(1)
Mock Exam paper for the Pearson Engineering Tech Award Component 3 Part 2 Responding to an Engineering brief. This is a mock exam made by myself based around a bottle opener and a question for the analysis of data part. This was really useful in helping my students prepare for the exam last year.
Engineering Tech Award Mock Exam Paper Handle
dduncalfedduncalfe

Engineering Tech Award Mock Exam Paper Handle

(0)
Mock Exam paper for the Pearson Engineering Tech Award Component 3 Part 2 Responding to an Engineering brief. This is a mock exam made by myself based around a door handle and a question for the analysis of data part. This was really useful in helping my students prepare for the exam last year.
Questionnaire Sheet for Market Research
dduncalfedduncalfe

Questionnaire Sheet for Market Research

(2)
Double sided questionnaire sheet for use in market research, good for KS3, 4 and 5. Students come up with questions and answers and then complete the survey to give them data. The sheet also has boxes for students to explain what the results mean to the research they are doing. Students can use this and then move onto Excel to create graphs of the data.
Orthographic Worksheet
dduncalfedduncalfe

Orthographic Worksheet

(0)
Worksheet which lays out the orthographic projections of an example shape. Students need to complete the views to create an orthographic drawing of the shape. Good extension task or for teaching students about orthographic projections. Completed drawing example included also.
Boat STEM Lesson
dduncalfedduncalfe

Boat STEM Lesson

(0)
This is a powerpoint for a STEM lesson about making a boat out of a piece of A4. This is a stand alone 1 hour lesson that can be used as a fun activity but also explains the design process, from initial ideas, research, developed ideas, modelling, testing and evaluating. All you need is a piece of card for each team, tape and some weights. 100g weights up to 1kg works well. (And some water).
Engineering Tech Award Mock Exam Paper Cable
dduncalfedduncalfe

Engineering Tech Award Mock Exam Paper Cable

(0)
Mock Exam paper for the Pearson Engineering Tech Award Component 3 Part 2 Responding to an Engineering brief. This is a mock exam made by myself based around a cable holder and a question for the analysis of data part. This was really useful in helping my students prepare for the exam last year.
New and Smart Materials lesson and resources
dduncalfedduncalfe

New and Smart Materials lesson and resources

(1)
PowerPoint and resources for a lesson on New and Smart materials in Design and Technology. Their is a starter video (linked to YouTube) with a question sheet to ensure students are paying attention during it. Students have a worksheet that they initially work through during the teachers explanation but then use resources around the room to find out about the different Smart materials, they should then compare and discuss this with their peers. Differentiated worksheets for the main task and a plenary which links well to the progress criteria for the lesson.