Hero image

Gstephenson84's Shop

Average Rating3.50
(based on 97 reviews)

Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic. Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.

271Uploads

114k+Views

63k+Downloads

Each resource has a slide to assess prior knowledge, introduction to the topic that the lesson covers and a range of tasks, activities and progress checks to assess student understanding throughout each topic. Lessons are available as a bundle to cover the whole topic of a specification (at a discounted rate) or are available to buy individual lessons.
AQA Physics Paper 2 GCSE (Combined/Trilogy) Revision power point
gstephenson84gstephenson84

AQA Physics Paper 2 GCSE (Combined/Trilogy) Revision power point

(1)
This is a revision power point to be used when revising the content of AQA Physics paper 2 - it covers the key areas of the trilogy/combined course. The activities/questions/information slides covering the areas of paper 2 that tend to be most difficult for students and could be used over a number of revision lessons to prepare your students for their exams. The power point includes: An overview of all topics on paper 2 Physics Equations covered on paper 2 Physics Recap of the required practical activities Information slides to quickly recap areas of paper 2 Differentiated activities that ask students to apply their knowledge of the different topics. More difficult questions are there to ask students to apply their knowledge to unfamiliar situations. Stretch activities for the more able. One mark questions to quickly recap topics and establish what topics need to be revisited more thoroughly than others. The main topic areas that are covered on this revision power point are : Motion Motion graphs - distance-time and velocity-time Forces - 1 mark questions Waves Electromagnetic radiation Generating radiowaves (HT) Magnetism Electromagnetism The motor effect Fleming’s left hand rule Solenoids
New AQA P2.8 (New Physics GCSE spec 4.2 - exams 2018) - Power and energy transfers in appliances
gstephenson84gstephenson84

New AQA P2.8 (New Physics GCSE spec 4.2 - exams 2018) - Power and energy transfers in appliances

(1)
AQA P2 (New GCSE Spec – Unit 4.2 – Electricity) Lesson: P2.8 – Power and energy transfers in everyday appliances Specification points covered = 4.2.4.1 - Power 4.2.4.2 - Energy transfers in everyday appliances A fully resourced lesson about power and energy transfers in everyday appliances to be used when teaching the new physics specification GCSE of AQA P2 (Paper 1, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C7.8 (New Spec 4.7 - exams 2018) - Addition Polymerisation (Triple only)
gstephenson84gstephenson84

AQA C7.8 (New Spec 4.7 - exams 2018) - Addition Polymerisation (Triple only)

(0)
AQA C7 (New Spec – Unit 4.7 – Organic chemistry) Lesson: C7.8 - Addition polymerisation (Triple only) Specification points covered = 4.7.3.1 – Addition polymerisation A fully resourced lesson about addition polymerisation to be used when teaching the New specification of AQA C7 (Paper 2, Topic 2). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA Chemistry New GCSE (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) ALL LESSONS
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) ALL LESSONS

(5)
AQA Chemistry New Spec (Paper 1 Topic 5- exams 2018) – Energy Changes (4.5) AQA Chemistry New Specification! All lessons to cover topic 5 (paper 1, topic 5) – Energy Changes, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4) 4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task) 4.5.1.2 – Reaction profiles (C5.2 lesson) 4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson) Chemistry Triple science specification points and lessons: 4.5.2.1 – cells and batteries (C5.3 lesson) 4.5.2.2 - Fuel Cells (C5.4 lesson)
AQA New GCSE Chemistry (Exams 2018) - Entire Paper 1 resource pack
gstephenson84gstephenson84

AQA New GCSE Chemistry (Exams 2018) - Entire Paper 1 resource pack

5 Resources
AQA Chemistry New GCSE Spec Entire resources to cover all content in paper 1 of the new GCSE specifications. All lessons for all 5 topics, including any worksheets, practical order information to support in teaching these topics. Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. Specification points covered are: Topic 1 - Atomic structure and the periodic table: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Topic 2 - Bonding structure and the properties of matter: 4.2.1.1 – Chemical bonds 4.2.1.2 – Ionic bonding 4.2.1.3 – Ionic compounds 4.2.1.4 – Covalent bonding 4.2.1.5 – Metallic bonding 4.2.2.1 – Three states of matter 4.2.2.2 – State symbols 4.2.2.3 – Properties of ionic compounds 4.2.2.4 – Simple covalent substances 4.2.2.5 – Polymers 4.2.2.6 – Giant covalent substances 4.2.2.7 – Properties of metals and alloys 4.2.2.8 – Metals as conductors 4.2.3.1 – Diamond 4.2.3.2 – Graphite 4.2.3.3 – Graphene and fullerenes Chemistry Triple science lessons: 4.2.4.1 – Sizes of particles and their properties 4.2.4.2 – Uses of nanoparticles Topic 3 - Quantitative Chemistry: 4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson) 4.3.1.2 – Relative formula mass (C3.2 lesson) 4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson) 4.3.2.1 – Moles (Higher tier) (C3.3 lesson) 4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson) 4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson) 4.3.2.4 – Limiting reactants (HT) (C3.5 lesson) 4.3.2.5 – Concentration of solutions (C3.6 lesson) Chemistry Triple science specification points and lessons: 4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson) 4.3.3.1 – Percentage yield (C3.8 lesson) 4.3.3.2 – Atom economy (C3.9 lesson) 4.3.5 – Molar volume of gases (HT) (C3.10 lesson) Topic 4 - Chemical changes 4.4.1.1 - Metal Oxides (C4.1 lesson) 4.4.1.2 - The reactivity series (C4.1 lesson) 4.4.1.3 - Extraction of metals and reduction (C4.2 lesson) 4.4.1.4 - Oxidation and reduction in terms of electrons (HT only) (C4.3 lesson) 4.4.2.1 - Reactions of acids with metals (C4.4 lesson) 4.4.2.2 - Neutralisation of acids and salt production (C4.5 lesson) 4.4.2.3 - Soluble salts (C4.5 lesson) 4.4.2.4 - The pH scale and neutralisation (C4.6) 4.4.2.5 - Titrations (Triple only) (C4.7 lesson) (Includes required Practical activity 2) 4.4.2.6 - Strong and weak acids (HT only) (C4.8 lesson) 4.4.3.1 - The process of electrolysis (C4.9 lesson) 4.4.3.2 - Electrolysis of molten ionic compounds (C4.9 lesson) 4.3.3.3 - Using electrolysis to extract metals (C4.10 lesson) 4.4.3.4 - Electrolysis of aqueous solutions (C4.9 lesson) 4.4.3.5 - Representation of reactions as half equations (HT only)(C4.9 lesson) 4.4.3.4 - Required practical 3 (C4.11 lesson) Topic 5 - Energy Changes: 4.5.1.1 – Energy transfer during exothermic and endothermic reactions(C5.1 lesson. Includes required practical 4) 4.5.1.1 - Uses of exothermic and endothermic reactions (C5.1 research task) 4.5.1.2 – Reaction profiles (C5.2 lesson) 4.5.1.3 - The energy changes of a reaction (HT only) (C5.2 lesson) Chemistry Triple science specification points and lessons: 4.5.2.1 – cells and batteries (C5.3 lesson) 4.5.2.2 - Fuel Cells (C5.4 lesson)
New AQA P4.2 (New Physics GCSE spec 4.4 - exams 2018) - Developments of the model of the atom
gstephenson84gstephenson84

New AQA P4.2 (New Physics GCSE spec 4.4 - exams 2018) - Developments of the model of the atom

(0)
AQA P4 (New GCSE Spec – Unit 4.4 – Atomic Structure) Lesson: P4.2 – Developments of the model of the atom Specification points covered = 4.4.1.3 - The development of the model of the atom (common with chemistry) A fully resourced lesson about developments of the atom to be used when teaching the new physics specification GCSE of AQA P4 (Paper 1, Topic 4). Fully resourced with differentiated tasks and activities shown on power point slides.
AQA C2 - Ionic compounds and ionic formulae
gstephenson84gstephenson84

AQA C2 - Ionic compounds and ionic formulae

(0)
AQA C2.3 - Writing ionic formulae. A full lesson about how to write ionic formula to be used when teaching the AQA additional science unit. Fully resourced with differentiated tasks and activities shown on power point slides.
Edexcel C3 Lessons - Fully resourced power points covering the entire C3 unit for edexcel
gstephenson84gstephenson84

Edexcel C3 Lessons - Fully resourced power points covering the entire C3 unit for edexcel

(0)
A full set of power points that guides learners through every lesson in the Edexcel C3 unit. Plus, learner friendly specifications, broken down into the different topics so that learners can assess their own progress through the unit. All power points have tasks, activities and progress checks to assess learner progress when teaching the topic. Power points are fully differentiated with tasks to suit those sitting both foundation and higher tiers, and tasks are available to stretch the most able learners. Many of the power points were used during ofsted observations which were given outstanding judgements. All passwords should have been deleted from resources to be edited, however if not, password is: science4
AQA Chemistry New GCSE (Paper 1 Topic 1- exams 2018)  - Atomic structure + the periodic table (4.1)
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 1 Topic 1- exams 2018) - Atomic structure + the periodic table (4.1)

(3)
AQA Chemistry New Specification! All lessons to cover topic 1 (paper 1) from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. Specification points covered: 4.1.1.1 - atoms, elements and compounds 4.1.1.2 - Mixtures 4.1.1.3 - Scientific models of the atom 4.1.1.4 - relative electrical charges of subatomic particles 4.1.1.5 - size and mass of atoms 4.1.1.6 - electronic structure 4.1.2.1 - The periodic table 4.1.2.2 - development of the periodic table 4.1.2.3 - metals and non-metals 4.1.2.4 - Group 0 4.1.2.5 - Group 1 4.1.2.6 - Group 7 Chemistry Triple science lessons: 4.1.3.1 + 2 - Transition metals and their properties Lessons have differentiated tasks available on slides and tasks to assess learning throughout the lessons.
AQA C2.6 (4.2 – Bonding and properties) (New Spec - exams 2018) - Giant covalent properties
gstephenson84gstephenson84

AQA C2.6 (4.2 – Bonding and properties) (New Spec - exams 2018) - Giant covalent properties

(1)
AQA C2.6 (new spec - 4.2.6 - paper 1, topic 2 new spec) - Properties of giant covalent substances A fully resourced lesson about the properties of giant covalent substances to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.
AQA C2.13 (4.2 – Bonding and properties) (New Spec - exams 2018) - Nanoparticles (TRIPLE)
gstephenson84gstephenson84

AQA C2.13 (4.2 – Bonding and properties) (New Spec - exams 2018) - Nanoparticles (TRIPLE)

(0)
AQA C2.13 (new spec - 4.2.13 - paper 1, topic 2 new spec) - Nanoparticles (for triple science) A fully resourced lesson about nanoparticles and their properties (for triple science) to be used when teaching the New specification of AQA C2 (Bonding structure and properties of matter). Fully resourced with differentiated tasks and activities shown on power point slides. Along with opportunity to assess learning throughout the lesson.
AQA Chemistry New GCSE (Paper 1 Topic 3- exams 2018) – Quantitative Chemistry (4.3) ALL LESSONS
gstephenson84gstephenson84

AQA Chemistry New GCSE (Paper 1 Topic 3- exams 2018) – Quantitative Chemistry (4.3) ALL LESSONS

(1)
AQA Chemistry New Specification! All lessons to cover topic 3 (paper 1) – Quantitative Chemistry, from the new spec (exams 2018). Lessons cover both the combined 'trilogy' science route and also the 'triple' separate chemistry lessons. The lessons include any required practical tasks that AQA have outlined, and an opportunity for learners to complete each of these. Lessons have differentiated tasks available on slides and progress checks to assess learning throughout the lessons. There is also opportunity to assess extended answer questions in some of the lessons to allow extended feedback on their work in these tasks. All of the following specification points are covered for this topic and in brackets is the lesson that the point is covered in: Trilogy and triple specification points and lessons: 4.3.1.1 – Conservation of mass and balanced chemical equations (C3.1 lesson) 4.3.1.2 – Relative formula mass (C3.2 lesson) 4.3.1.3 – Mass changes when a reactant or product is a gas (C3.1 lesson) 4.3.2.1 – Moles (Higher tier) (C3.3 lesson) 4.3.2.2 – Amount of substances in equations (Higher tier) (C3.4 lesson) 4.3.2.3 – Using moles to balance equations (Higher tier) (C3.5 lesson) 4.3.2.4 – Limiting reactants (HT) (C3.5 lesson) 4.3.2.5 – Concentration of solutions (C3.6 lesson) Chemistry Triple science specification points and lessons: 4.3.4 – Using concentrations of solutions in mol/dm3 (HT) (C3.7 lesson) 4.3.3.1 – Percentage yield (C3.8 lesson) 4.3.3.2 – Atom economy (C3.9 lesson) 4.3.5 – Molar volume of gases (HT) (C3.10 lesson)
New AQA P7.1 (New Physics GCSE spec 4.7 - exams 2018) - Magnetic poles and magnetic fields
gstephenson84gstephenson84

New AQA P7.1 (New Physics GCSE spec 4.7 - exams 2018) - Magnetic poles and magnetic fields

(0)
New AQA P7.1 (New Physics GCSE spec 4.7 - exams 2018) - Magnetic poles and magnetic fields AQA P7 (New GCSE Spec – Unit 4.7 – Magnetism and electromagnetism) Lesson: P7.1 – Magnetic poles and magnetic fields Specification points covered = 4.7.1.1 - Poles of a magnet 4.7.1.2 - Magnetic fields A fully resourced lesson about magnetism, the poles of a magnet, magnetic fields and permanent and induced magnetism, to be used when teaching the new physics specification GCSE of AQA P7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
New AQA P5.14 (New Physics spec 4.5 - exams 2018) - Braking forces and factors affecting it
gstephenson84gstephenson84

New AQA P5.14 (New Physics spec 4.5 - exams 2018) - Braking forces and factors affecting it

(0)
AQA P5 (New GCSE Spec – Unit 4.5 – Forces and their interactions) Lesson: P5.14 – Braking forces and factors affecting it Specification points covered = 4.5.6.3.1 - Stopping distance 4.5.6.3.2 - Reaction time 4.5.6.3.3 - Factors affecting braking distance 1 4.5.6.3.4 - Factors affecting braking distance 2 A fully resourced lesson covering braking and forces. The lesson covers the range of aspects needed in these specification points (stopping/thinking/braking distances. Factors affecting each of these and the braking force required etc.). The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P5 (Paper 2, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA A level Chemistry - Electron configuration and ionisation energies (Physical chemistry - atomic)
gstephenson84gstephenson84

AQA A level Chemistry - Electron configuration and ionisation energies (Physical chemistry - atomic)

(0)
AQA A level chemistry - Physical chemistry Topic 1 - Atomic structure, lesson 3 - Electron configuration and ionisation energies Specification points covered = 3.1.1.3 - Electron configuration Fully resourced lesson covering the following with information and tasks: Electron configurations of atoms and ions up to Z = 36 in terms of shells and sub-shells (orbitals) s, p and d. Ionisation energies. Students should be able to: • define first ionisation energy • write equations for first and successive ionisation energies • explain how first and successive ionisation energies in Period 3 (Na–Ar) and in Group 2 (Be–Ba) give evidence for electron configuration in sub-shells and in shells. Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
AQA B7.10 (Biology spec 4.7) - Trophic levels, biomass pyramids and transfers (TRIPLE ONLY)
gstephenson84gstephenson84

AQA B7.10 (Biology spec 4.7) - Trophic levels, biomass pyramids and transfers (TRIPLE ONLY)

(0)
AQA B7 (New GCSE Spec – Unit 4.7 – Ecology) Lesson: B7.10 - Trophic levels, biomass pyramids and transfers (TRIPLE ONLY) Specification points covered = 4.7.4.1 - Trophic levels 4.7.4.2 - Pyramids of biomass 4.7.4.3 - Transfer of biomass A fully resourced lesson covering the trophic levels in an ecosystem section for the biology only route. The lesson includes information and tasks on all aspects of trophic levels, pyramids of biomass and the transfers of biomass. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA B7 (Paper 2, Topic 3). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.
New AQA P1.4 (New Physics spec 4.1 - exams 2018) - Energy Efficiency
gstephenson84gstephenson84

New AQA P1.4 (New Physics spec 4.1 - exams 2018) - Energy Efficiency

(1)
AQA P1 (New GCSE Spec – Unit 4.1 – Energy) Lesson: P1.4 – Energy Efficiency Specification points covered = 4.1.2.2 - Efficiency A fully resourced lesson covering the energy efficiency for any energy transfer and calculating the efficiency using equations. The lesson covers both the higher and foundation tier objectives given in the specification with fully differentiated tasks and answers to cover both, to be used when teaching the new physics specification GCSE of AQA P1 (Paper 1, Topic 1). Fully resourced with differentiated tasks and activities shown on power point slides. Any questions/tasks set for students have peer or self-assessment slides available with answers showing.