This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task involves pupils discussing the definitions for a set of ecological terms, pupils can write their ideas down in their books and then watching a video to fill in any blanks they were unsure of. Once this has been completed pupils can self-assess their answers using the mark scheme provided. The next task is for pupils to think > pair> share about how animals are interdependent upon each other, they can write down their ideas as a brain storm in their books. Once this has been completed, pupils can self-assess their work using the answers provided. Pupils will then be given some information on stable communities, they will need to read this information in pairs and then try and answer a set of questions. They can then self-assess their work, correcting anything they didn’t get correct using the answers provided. Pupils will now be introduced to the difference between abiotic and biotic factors, the first task is for pupils to watch a video and sort the factors demonstrated in the video into two columns – abiotic vs. biotic. They will then be given a set of descriptions, pupils will firstly need to identify which factor is for a list provided and the second task is for pupils to identify whether this factor is biotic or abiotic. Pupils can complete this on the worksheet provided, once completed students can either self-assess or peer-assess their work, making any corrections if necessary. The plenary task is for pupils to choose two organisms from the pictures on the PowerPoint slide, they will need to describe the difference in habitats between the organisms and compare the abiotic and biotic factors which affect their survival. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

PowerPoint and task cards aimed at a KS3 class (initially planned for Year 9) to complete a poster, written assignment and a model for a specific area of Science to present in a Science Fair. For each of the task cards a detailed list of requirements for each part of the project is included, with ideas for extension work to earn more points and homework ideas as well. I used this resource straight after my students had completed their end of year test as a fun and engaging activity, when complete pupils presented their projects to the class and I awarded certificates for best written assignment, best poster, best model and best overall project.

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by looking an organism - a cat- and asking pupils to think about the types of stimulus the cat might respond to in it’s environment, plus which organs it needs to sense these stimuli. Pupils will brainstorm their ideas and then self-assess their work once the answers are revealed, additionally they will answer an exam question on this topic. Next, pupils focus on the effectors and their role in the nervous system. Pupils will be provided with a description of the role of muscles and glands as effectors and will then need to complete an exam question to assess their knowledge, mark scheme provided for either peer or self-assessment. The next part of the lesson will focus on neurons, firstly a diagram of a neuron cell is shown and pupils need to think about how this cell is similar and different to a normal animal cell. Pupils may discuss this in pairs and try and come up with an answer before the mark scheme is revealed. Sensory and motor neurons are now introduced via an animation, pupils can look at the pathway the electrical impulse travels as it moved around the nervous system. Pupils will use this to then copy and complete a summary to describe this process, when completed this can be self-assessed. The final activity is for pupils to copy and complete a table to sum up the main functions of each part the human nervous system either by using a card sort or by putting the statements on the board. This can then be peer or self-assessed when complete The plenary activity is for pupils to summarise the 5 main key words they have learnt that lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience First of all students are asked to consider why not all of the light that falls onto a plant will be used in photosynthesis. Students can think > pair > share their ideas in their books. Once complete the following slide goes through the possible ways in which light energy can be lost before it used to make new plant biomass. Students will listen and then need to fill in the blanks on a paragraph detailing these processes. Once this task is complete students can self-assess their work. Students are then shown a simple food chain and asked to think about how biomass could be lost at each stage in the food chain. Pupils can discuss their ideas and create a mind map in their books, why isn’t all of the biomass from trophic level passed on to the next trophic level? The next slide reveals some of these reasons, pupils can check their work against the answers. Pupils will then be given a worksheet detailing energy loss and energy transfer criteria, students need to use this information to annotate a food chain to show how energy is lost and how much is transferred to the next trophic level. There are a number of ways in which they may do this but there is a sample answer provided to demonstrate how the student could have completed their work. The last part of the lesson looks at efficiency of energy transfer, pupils will be shown the efficiency calculation and a worked example. Pupils can write the calculation into their books and then use this to answer a set of questions. Once complete pupils can self-assess their work. The plenary task is for pupils to turn to the back of their books and write three summary sentences on what they have learnt this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with students given some pictures of a range of people that look differently to one another, students will need to think > pair > share what the differences are between these people and the reasons why they look different to each other. Pupils will then be introduced to the difference between examples of inherited and environmental characteristics. Firstly pupils will focus on inherited characteristics, the students will need to complete a mind map in their books of the traits they have inherited from their parents (or from grandparents). As an extra challenge pupils can consider why they do not look identical to either parent. The next task will focus on environmental characteristics, pupils will need to draw a table in their books and they will need to sort examples of environmental factors with the type of environmental variation they cause into the table correctly. This work can be self-assessed once it is is complete using the answers provided. For the next activity pupils will be given a card sort of different examples of variation, e.g. height, freckles, eye colour, tattoos. Pupils will need to sort these cards into a Venn diagram in their books - just inherited variation, just environmental variation or potentially caused by both. This work can be self-assessed once it is complete. The next part of the lesson focuses on types of data - continuous or discontinuous. Pupils are firstly shown the difference between the two and then they will need to complete a worksheet to assess their understanding on this. Once completed the worksheet can be self or peer assessed. The final task is for pupils to get into teams (or be sorted by the teacher into teams) and they work their way around the room filling in information about themselves for different types of traits (e.g. handedness, foot length, whether they can roll their tongue). Pupils will assigned one trait each and will need to produce a graph of the class results. This will test their understanding of continuous vs. discontinuous data and how this should be represented in a graph format. The plenary task is for pupils to consider a world where there was no variation and discuss the advantages and disadvantages of this world, trying to use some of the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson starts with an introduction to accommodation, in pairs pupils will be given either information on how the eye focuses on distant objects or on nearby objects. Pupils will have to teach each other about the information they have and complete the questions listed on the PowerPoint slide. Once this task is completed it can be assessed using the mark scheme provided. The next part of the lesson focuses on common defects of the eye, specifically myopia and hyperopia. Pupils will need to use posters of information placed around the room/on their table to complete a fact file on both of these conditions which includes a description of the disease and of the treatments available. Pupils will now consider some of the ways in which these common eye defects can be overcome, pupils will be given a card sort in pairs describing different technologies in treating these conditions. Pupils will need to read these cards and produce a table which sums up the advantages and disadvantages of these treatments. The last activity is an exam-style question which pupils can complete in silence, once finished they can use the mark scheme to self-assess their work. The plenary task is an anagram challenge, pupils should unscramble the words to identify key words they have learnt on the topic of the eye. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Cells’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a review discussion of antibodies. Students should describe the structure and function of antibodies in addition to the roles of plasma and memory cells. Students are then introduced to the function of vaccines a simulation of immune response through a descriptive graph. They should take notes of the following slides which define immunity, both passive and active. The two forms of immunity are also described as a flowchart, students will use this chart to help them complete the first task of the lesson! Answers are available on the following slide for self-assessment. The second task is to copy and complete a table to summarise active and passive immunity. The next slides introduce the three main types of vaccines, students should take good notes before answering an exam style question. Answers are available on the following slide for self-assessment. Students will then think>pair>share to discuss the features of a successful vaccination program. They should consider side effects, administration, production, and herd immunity. Herd immunity is then defined and used to explain historical examples of population-wide vaccinations. Students will use these slides to inform the next task, in which they’ll be asked to consider why a vaccine may fail to eliminate a disease. They will be given a short reason and asked to describe why this reason impacts immunity. Answers for self-assessment are available on the following slide. The plenary task for this lesson is to create a keywords list from the lesson overall. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Biological Molecules’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson begins with a review discussion of ATP as an energy source and its role in plant cells. The next few slides are lecture-style and designed to teach students the properties of water as a biological molecule. The notes underneath the slides also offer some answers to the discussion questions on the slides. Students are then given a four question ‘quick check’ to demonstrate their understanding so far. They should answer in their books and self-assess or check a partner’s work with the answers on the following slide. Then students will each be given a reason why water is important; the two reasons can be found as descriptions at the end of the slideshow. Students should teach a partner with the opposite reason, then make notes in table form in their books before moving to the next slide which is a quick explanation of inorganic ions. As a summary test, students are given two questions, the first of which includes a few sub-questions. Students should answer independently in their books then self-assess with the answers on the following slide. This is a good opportunity to answer any other questions! The plenary task is to explain what they have learned through three facts, three key words, and a question to test their peers on. All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This is a resource for the new AQA GCSE Biology ‘Infection and Response’ module. The lesson begins with an introduction to the structure of fungi and protists and some of the diseases they can cause in plants and animals. Pupils can then stick a piece of information in their books which outlines the rose black spot fungal disease of plants and the protist disease of malaria in humans. Pupils should use this information to work their way through the levelled tasks on the board. You can then go through the answers to these questions and pupils can self-assess or peer-asses their work. The mid-lesson progress check is an activity where pupils match definitions to the correct key words, pupils can self-assess their work. In the next activity pupils can create a pamphlet/poster aimed at patients going abroad to a country where they could be at risk of contracting malaria. Pupils can work through the tasks for each of the parts of the ABCD approach in order to complete this poster. Pupils can then peer-assess their work. Plenary is a quick quiz pupils can complete at the back of their books. Other lessons from the ‘Infection and Response’ unit can be found in my TES shop. Thanks :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a quick recap from the previous lesson on the cause and control of diabetes, pupils will need to copy and complete sentences in their books, which can then be self-assessed. Next pupils are given detailed posters of information on the treatments available to patients with type 1 and type 2 diabetes. Pupils will need to read through these posters in pairs/on a table and answer the questions on the PowerPoint slide. Once finished, pupils can self-assess their work using the answers provided. Pupils will now focus on the advantages and disadvantages of different medical cures for type 1 diabetes. In pairs they will be given a set of cards informing them of new advances in treatments available to patients with type 1 diabetes and they will need to create a summary table to weight up the pro’s and con’s of each treatment. The final activity is an exam question on what pupils have learnt so far that lesson, this is accompanied with a mark scheme which pupils can use to mark their work. The plenary activity is an anagram challenge, pupils need to unscramble the letters to spell a key word from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This a resource aimed at the new AQA GCSE Biology specification as part of the 'infection & response' unit. This lesson is part of a 12 lesson bundle for the NEW 'Infection & Response' Unit, found in my TES shop - https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a recap of what makes a good medicine. Pupils are then given a scenario where they have to read some information cards on different medicines and using the information they need to decide which medicine would be the best to treat a bacterial infection. The next PowerPoint slide will go through the difference between antibiotics and painkillers and hopefully students should have chosen the antibiotic as the drug to treat bacterial infections in the previous activity. Next is an introduction to Alexander Fleming, the scientist who first discovered penicillin. Pupils can watch a video on his work and answer questions on a worksheet. Pupils can then peer-assess their work. The next few slides focus on how the growth of bacteria are affected by antibiotics, pupils can then use some data on the growth of bacteria to answer some questions. For the plenary pupils need to choose the correct word to complete the sentences. Other lessons for the NEW AQA 'Infection & Response' unit can be found in my TES shop. Thanks :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first task is for pupils to think > pair > share the factors which may cause a contribution of carbon dioxide into our atmosphere. Pupils can create a mind map in their books and then discuss their ideas as a table and then as a class. The next PowerPoint slide reveals some of the main factors which contribute to an increase in carbon dioxide levels in our atmosphere, pupils can check their work against these answers. For the next task pupils will be required to watch a video about the greenhouse effect and answer questions in their books, this task can be self-assessed using the answers provided once complete. Using this information pupils will then be asked to fill in the blanks on a diagram depicting the greenhouse effect, pupils will be given captions to write into the correct boxes on their worksheet. This can be self-assessed once it has been completed. Next pupils will be given a set of data on the mean world temperature change from 1960 to present day, students will be required to plot the data on a graph, describe the pattern of the graph and explain why the graph may be showing this pattern. The next part of the lesson focuses on global warming, students will firstly be given a set of questions which they will need to answer whilst watching a video. This work can then be self-assessed using the answers provided. For the very last task pupils will be given a card of information each detailing an environmental factor and it’s impact on living organisms. Pupils will need to wander around the room and share information with each other to complete their table of environmental factors. The plenary task is for pupils to identify what the questions might be for a set of answers provided on the PowerPoint presentation. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of the lesson outlines the definition of deforestation and some key facts and figures about the destruction of forests around the world. The next task is for pupils to discuss why they think rainforests may be being cut down & the consequences this might have on a local & global scale. The next two slides outlines the four main reasons why rainforests are being destroyed and some of the consequences of their destruction, pupils can check their work against the answers provided. The next task requires pupils to watch a video and answers questions using the information provided in the video, once they have completed the question they can asses their work using the answers provided. Pupils will now be required to complete a recap task on the carbon cycle, they will be given a worksheet which they will be asked to fill in using the captions provided on the PowerPoints slide. Once this has been completed pupils can assess their work using the answers on the PowerPoint slide. The next part of the lesson focuses on the importance of peat, firstly pupils will be given a set of information about peat bogs and they will be required to answer questions using this information. This work can be self or peer assessed once it has been completed. The final task is for pupils to answer an exam-style question on the carbon cycle and deforestation. Pupils can assess their work using the mark scheme provided. The plenary task is for pupils to choose words from a list of key words to formulate three summary sentences on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Biology GCSE, particularly for the higher tier for the 'Infection & Response ’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a starter discussion to remind students about communicable disease, and which bacteria are harmful. The next slides introduce and define pathogens, and some harmful and non-harmful bacteria. They will then watch a short video which explains the differences between viruses and bacteria then complete a Venn diagram task. The next task is a true/false activity to complete as a class and asses their understanding thus far. Students are then directed to work in pairs to make a mind map in their books describing how pathogens are spread. Students will then be instructed to work on their own to answer three questions about pathogens spreading. Answers are on the following slide for self-assessment. The plenary task is an exam style question, students can self-assess to the mark scheme on the last slide. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the 'Homeostasis' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will start the lessons by considering why a reflex action is important to living organisms and asking pupils to consider any examples they can think of. After revealing the importance of reflex actions and come examples, the slides then move on to look at the pathway an electrical impulse takes along a reflex arc. Pupils will delve a little deeper into this by watching a video, during which they can answer questions. Once this has been completed they can self-assess their work using the answers provided. This process can also be summarised using a copy and complete exercise. Next, the lesson focuses on synapse, a diagram of a synapse is shown with key details labelled, there is also a link to an animation that can be shown to demonstrate what occurs at the gap between neurons. After this has been demonstrated pupils are then asked to complete some tasks to show their understanding of what occurs at a synapse. The next activity involved a set of statements which are muddled up, pupils need to put them into the correct order to correctly describe the steps involved with a reflex arc. Once this has been completed pupils can assess their work using the model answer provided. The final activity is a past-paper question which can be printed for pupils or they can complete in their own books, this needs to be self or peer assessed once complete. The plenary task is for pupils to pick a task - either to summarise the work from the lesson using a list of key words or for pupils to come up with questions for the list of answers that are provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA AS-level Biology course, particularly the ‘Organisms & their Environment’ module. For more lessons designed to meet specification points for the NEW AQA A-level Biology course please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience A-Level lesson format: I teach in more of a lecture style compared to GCSE. In the majority of my A-level lessons the beginning portion of the lesson is mainly teacher-led, where students are expected to take notes onto a handout/in their books. This is then mixed in with student-led activities, as well as questions and exam prep. You will find some of my slides have blank spaces for you to add more detail/descriptions/explanations. If you look at the ‘Notes’ section underneath each of these slides, you will find additional content which you can add in as you teach! This lesson in the gas exchange in the leaf of a plant and limiting water loss begins with a starter discussion to remind students of the tissues found in leaves and the tracheal system in insects. Students will then be asked to think about the relationship between plant an animal cells and respiration of the two respectively. They should also consider when photosynthesis is taking place, and when it is not. The first task of this lesson is a diagram worksheet to label the structures of a leaf cell. Answers are on the following slide for self-assessment, followed by a light micrograph of leaf structure. The next task is to consider leaf adaptations for photosynthesis and identify the purpose of the adaptation (to absorb light, for gas exchange, reduce water loss, or transport). Answers follow for self-assessment. Students are then introduced to the stomata. They should make notes on the structure when the guard cells are swollen or shrunken. The next task is to answer three summary questions, sample answers are available on the following slide for self-assessment. The problem for all terrestrial organisms is water evaporation from the surface of their bodies. Students are asked to remember the various ways in which insects limit water loss before they are introduced to plant adaptations. Xerophytes are introduced as an example, including cacti and marram grass. Students will then complete a table using information cards about xerophytic adaptation, and four summary questions. Answers for both follow, for self-assessment. The final task is to complete an exam style question to consolidate their learning and self-assess to the sample mark scheme. The plenary is to write three sentences to summarise what they have learnt this lesson! All resources are included. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy GCSE Biology ‘Organisation’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by pupils observing a diagram of a phloem and a xylem vessel and discussing what the similarities and differences are between the two tissues. This can lead into a class discussion about the two structures. Next is a quick recap task, pupils should have already looked at the overall function of both of these vessels so pupils now need to complete sentences to describe the role of the xylem an phloem vessel in plants. The next activity is a video, pupils will given a set of questions and they will need to answer these questions using the video. Once finished they can self-assess their work using the answers provided on the PowerPoint. Next, pupils will need to draw two columns in their book entitled Xylem and Phloem and sort statements into these two columns, after this is completed they can assess their work. The last thing students will need to consider is why is transport so important in plants, pupils will discuss/brainstorm in their books why sugars, mineral ions and water are important to the plant. The answers can then be revealed to them. The final activity is a past-paper 6 mark question, pupils will need to attempt to answer this on their own, at the back of their books for an extra challenge! Plenary activity is to complete a summary of what the students have learnt that lesson, a list of key words will be provided to help them complete this task. All resources are included in the PowerPoint, any questions please ask me via the comments section. Any feedback of this lesson would be much appreciated :) thank you!

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts with a PowerPoint slide which demonstrates how sunlight falling on plants is the initial source of energy for all living organisms. This moves on to a video which outlines the key terms related to food chains, pupils will be provided with a set of questions which they will need to answer using the video. Once pupils has completed this task pupils they can self-assess their work using the mark scheme provided. Pupils will then be shown an example of a food chain and the PowerPoint slide will reiterate what the video outlined, about what a food chain and the arrow in the food chains demonstrates. Pupils will then need to complete a task where they match key terms to their definitions and examples. This work can assessed once the task is complete. The next part of the lesson will focus on animal populations and dynamics. The first task pupils will be given a set of questions about the impact of various changes on animal populations (i.e. predator numbers, disease). In groups/pairs they will be given a piece of A3 paper and they will need to answer the questions as best they can. Pupils can then check their answers against the answers provided in the PowerPoint presentation. Pupils will then be given a food web and asked a set of questions about how various changes in the numbers of organisms within the food web would impact others, again this work can be self-assessed. The final activity is for pupils to draw a graph to represent data on the numbers of coyote and jack rabbits over the course of twenty years, pupils will then need to answer questions about this data. The plenary task is for pupils to complete a food chain choosing from a set of organisms provided on the PowerPoint slide, as an extra challenge pupils could try and complete their own food webs. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by introducing pupils to the definition of a clone and outlining the different cloning techniques they will learn about in this lesson. Pupils will firstly learn about two techniques used to clone plants - cuttings and tissue culture. Pupils will learn about these two techniques and will need to complete the correct descriptions on a diagram demonstrating the steps involved with taking plant cuttings. Once this is complete the work can be self-assessed. The second part of the lesson focuses on adult cloning. Firstly pupils are talked through the process of embryo transplants using a diagram. Pupils will be provided with a worksheet with a flow diagram of the embryo transplant process but missing statements to describe the process. Pupils will need to choose the correct statements to go in these boxes, this work can be assessed using the answers provided once complete. Adult cell cloning is the other example of an animal cloning technique pupils will need to describe. Firstly, pupils will watch a video about Dolly the sheep and the adult cell cloning process, using this video they will need to answer some questions. This can be checked against the answers which will be provided. For the next activity pupils will be provided with the diagram of the sequence of events involved in the adult cell cloning process, pupils will be required to fill in the blanks to complete the descriptions of the steps involved. Once completed pupils can use the mark scheme to assess their work. The final activity focuses on the risks and benefits of adult cell cloning, pupils will be given a list of opinions about this cloning technique and they will need sort them into advantages/disadvantages in their books. The plenary activity is for pupils to pick a task: either write a twitter message about what they have learnt this lesson or unscramble anagrams to spell out 5 key words from the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)