A lesson (double) covering all content for GCSE combined/Chemistry for cells, batteries and fuel cells 3 exam questions to use as assessment, some recommended as part of the lesson plan, others for extension Power Point is easy to follow with student tasks throughout to make lesson interactive (most answers given as part of presentation) Based on AQA but transferable across other specifications

138 slides covering the whole of module 5.1 Rates, equilibrium and pH of the new OCR A level Chemistry specification (from 2015) The PP includes onscreen activities (with answers) There is a link to a video on slide 94 to support the comprehension activity (also included) Topics included: Orders, rate equations and rate constants Concentration –time graphs Rate-concentration graphs Rate-determining step The effect of temperature on rate constants Equilibrium Equilibrium and Kp Equilibrium constants and their significance Bronsted-Lowry acids and bases Acid-base reactions and Ka Calculating pH of strong and weak acids The ionisation of water and Kw Buffers Neutralisation – titration curves Please note: I have used some slides from other authors to supplement my own and am very grateful to those people who shared.

Two Power Points covering the whole of module 3 for OCR AS/Year 1 Chemistry (Periodic table and energy) M3.1 Periodic table PP - 56 slides with activities included M3.2 Physical Chemistry - 113 slides with activities included Key word match up is for the standard enthalpy definitions (some additional definitions to spec but it extends their understanding an helps them to understand the definitions rather than just memorise them) RSC Problem - A little Gas is a nice research based activity to consolidate understanding after you have taught the Maxwell-Boltzman distribution M3.1 Specification areas covered: Periodic table Periodicity Periodic trend in electrical configuration and ionisation energy Periodic trend in structure and melting point Redox reactions and reactivity of group 2 metals Reactions of group 2 compounds The halogens Redox reactions and reactivity of halogens and their compounds Characteristic reactions of halide ions Qualitative analysis Tests for ions M3.2 Specification areas covered: Enthalpy changes: ΔH of reaction, formation, combustion and neutralisation Bond enthalpies Hess’ law and enthalpy cycles Reaction rates Simple collision theory Catalysts The Boltzmann distribution Chemical equilibrium Dynamic equilibrium and le Chatelier’s principle The equilibrium constant, Kc

A PP covering the AQA specification for Chemistry module 5.6.2 of the new AQA combined science Trilogy specification. The activity is to support the powerpoint and can be a whole class, group task or independent task (answers are provided). I have included some application questions to help students to link prior learning and extend understanding as well as help them to think outside the box. The PP is designed to help reduce your planning time by providing you with the main specification points for each topic so you can focus on making lessons creative and engaging. Each sub-topic includes a few quick multiple choice questions (MCQ) to assess students learning (AFL) Topics covered: Reversible reactions Energy changes and reversible reactions Equilibrium Effect of changing conditions on equilibrium (HT) Effect of changing concentration (HT) Effect of temperature (HT) Effect of pressure (HT)

A PP covering the AQA specification for Physics module 6.5.4.2 of the new AQA combined science Trilogy specification. The resource is designed to help reduce your planning time by providing you with the main specification points for each topic so you can focus on making lessons creative and engaging. Topics covered: Newton's First Law Newton's Second Law Newton's Third Law I hope to have covered the entire year 11 course for the new specification (biology, Chemistry and Physics) by summer 2017 so please keep checking for more resources. I will also be making assessments to go alongside the resources ready for September

A stand alone literacy activity to help students evaluate the use of contraceptives. It is a template for their article but they must use their knowledge and other sources of information to research the content LO: (WS1.4) - Explain everyday and technological applications of science; evaluate associated personal, social, economic and environmental implications; and make decisions based on the evaluation of evidence and arguments. Activity 4.5.3.4 accompanies the skeleton PP, Homeostasis and Response Skeleton PP for AQA Combined Science (Biology topic 5) - also available from TES

56 slides covering Module 5.2, Energy, of the new A level Chemistry specification I have included some exam questions (and answers) as well as MCQs and recommended independent tasks Specification topics covered: Energy Lattice enthalpy Born–Haber and related enthalpy cycles Enthalpy and entropy Entropy Free energy Redox Redox titrations Electrode potentials Storage and fuel cells

51 slides covering the whole of module 5.3, Transition metals, for OCR Chemistry A level (year 2) Specification points included: Transition elements and Properties Ligands and complex ions Ligand substitution Precipitation reactions Redox reactions Qualitative analysis Tests for ions I have also tried to include opportunities for application of the content to help students prepare for the unified paper

A 56 slide Power Point covering the whole of module 6.3, Analysis module of the OCR A level Chemistry specification (from 2015) Activities are included to consolidate learning (please note that some of these have been adapted from other users on TES) Specification points covered: Analysis Chromatography and qualitative analysis Types of chromatography Tests for organic functional groups NMR Spectroscopy Combined techniques

A stand alone activity to help students understand how rate of reaction is measured and calculated. LO: To analyse data from a rate of reaction experiment and to evaluate practical methods as part of the skills required for AQA Required Practicals Skills covered: MS 1a: Recognise and use expressions in decimal form. MS 1c: Use ratios, fractions and percentages. MS 1 d:Make estimates of the results of simple calculations. MS 4a: Translate information between graphical and numeric form. MS 4b: Drawing and interpreting appropriate graphs from data to determine rate of reaction. MS 4c: Plot two variables from experimental or other data. MS 4d: Determine the slope and intercept of a linear graph. MS 4e: Draw and use the slope of a tangent to a curve as a measure of rate of change. Activity 5.6.1.1 accompanies the skeleton PP, Rate of reaction Skeleton PP for AQA Combined Science (Biology topic 6.1) - also available from TES

Two Power Points and an activity covering the whole of module 6.2, Nitrogen Compounds, polymers and synthesis for OCR A level Chemistry (from 2015) PP Module 6.2.1 - 6.2.4 - 103 slides PP MOdule 6.2.5-6.2.11 - 33 slides Activity - Simple gap fill based on chiral compounds Specification point covered: 6.2.1 - 6.2.4 Amines Basicity and preparation of amines Reactions of amino acids Amides Chirality Polyesters and polyamides Condensation polymers Carbon–carbon bond formation Extending carbon chain length 6.2.5-6.2.11 Organic synthesis Practical skills Synthetic routes NB: Some slides have been adapted from other authors who have shared on TES, thank you for sharing

134 slides covering the whole of module 2 'Foundations in Chemistry' for OCR A level Chemistry A few of the activities included are from the RSC Starter for Ten resources (I have attached the bonding questions) Topics covered: Atoms and reactions Atomic structure and isotopes Relative mass Compounds, formulae and equations Amount of substance The mole Determination of formulae Calculation of reacting masses, gas volumes and mole concentrations Percentage yield and atom economy Acids, bases, alkalis and neutralisation Acid-base titrations Oxidation numbers Redox reactions Electrons, bonding and structure Energy levels, shells, sub-shells, atomic orbitals, electron configuration Ionic bonding Covalent bonding The shapes of simple molecules and ions Electronegativity and bond polarity Intermolecular forces

A PP covering the AQA specification for Chemistry module 6.1 of the new AQA combined science Trilogy specification. The resource is designed to help reduce your planning time by providing you with the main specification points for each topic so you can focus on making lessons creative and engaging. Each sub-topic includes a few quick multiple choice questions (MCQ) to assess students learning (AFL) Topics covered: Calculating rates of reaction (including an activity on data analysis and practical skills to support the students required practical studies) Factors which affect the rate of reaction Collision theory and activation energy Catalysts As this PP is smaller than some others I have included the activity as part of the price so there is no need to download it separately. I hope to have covered the entire year 11 course for the new specification (biology, Chemistry and Physics) by summer 2017 so please keep checking for more resources. I will also be making assessments to go alongside the resources ready for September

Students are given a week/ 7 hours to complete the task independently. The task covers the whole of module 1 in context and also develops their practical skills as part of the PAG tasks. The students will need to look up new terms in the textbook and research independently to complete the task successfully. 1. Hand in complete write-ups 2. swap tasks amongst peers and hand out peer assessment sheet. As you go through the PowerPoint, tasks appear that link to the peer assessment sheet. This way the students are covering the content of module 1 whilst also looking at in the context of their peers work and assessing the work. 3. Swap back for students to comment on the peer assessment 4. Finally (if you feel necessary) collect them in to teacher assess I covered the content in a double lesson and students learnt a lot from completing the task (despite a lot of grumbling) Covers OCR Chemistry A Module 1 Practical Skills in Chemistry Experimental design Types of variable Writing a plan Planning an investigation Recording data Manipulating data Evaluating results and drawing conclusions Precision and accuracy

Interactive lesson covering common misconceptions in bonding between molecules and atoms. (Intermolecular, ionic, covalent, giant covalent, metallic) Students start by self-assessing their knowledge Teacher hands out a misconception to each student Students have 10 minutes to work out how to explain the misconception to the class Each student then explains his misconception to the class and answers questions from their peers Students make notes throughout Students then re-assess themselves following the mini tutorials You can provide molymods/A3 paper etc. to help them explain, I also suggest they illustrate it on the board.

A stand alone activity to help students identify the position of each major gland in the human body (required as part of the AQA specification) LO: To identify the position of each major gland in the human body Activity 4.5.3.1 accompanies the skeleton PP, Homeostasis and Response Skeleton PP for AQA Combined Science (Biology topic 5) - also available from TES The activity is differentiated with 3 levels of difficulty and a solution is also provided for your reference

A PP covering the AQA specification for Physics module 6.5.4 of the new AQA combined science Trilogy specification. The resource is designed to help reduce your planning time by providing you with the main specification points for each topic so you can focus on making lessons creative and engaging. Each sub-topic includes a few quick multiple choice questions (MCQ) to assess students learning (AFL) Topics covered: Distance and displacement Speed Velocity Distance-time relationship Acceleration Newton's First law Newton's Second law Newton's Third law Stopping Distance Reaction time Factors affecting braking distance 1 Factors affecting braking distance 2 I hope to have covered the entire year 11 course for the new specification (biology, Chemistry and Physics) by summer 2017 so please keep checking for more resources. I will also be making assessments to go alongside the resources ready for September

Two Power Points covering the whole of module 4, Core Organic Chemistry, for AS/Year 1 A level Chemistry for OCR M4.1 Basic concepts and Hydrocarbons - 90 slides including activities (Dingbat plenary was made by another author on TES, thanks for sharing) M4.2 Alcohols, halogenalkanes and analysis - 124 slides including activities M4.1 Specification points covered: Basic concepts and hydrocarbons Basic concepts of organic chemistry Naming and representing the formulae of organic compounds Functional groups Isomerism Reaction mechanisms Properties of alkanes Reactions of alkanes Properties of alkenes Stereoisomerism in alkenes Addition reactions of alkenes Polymers from alkenes Waste polymers and alternatives M4.2 Specification points covered: Alcohols, haloalkanes and analysis Properties of alcohols Reactions of alcohols Haloalkanes Substitution reactions of haloalkanes Environmental concerns from use of organohalogen compounds Organic synthesis Practical skills Synthetic routes Analytical techniques Infrared spectroscopy Mass spectrometry Combined techniques

PP including 86 slides covering the whole of module 6.1 (Aromatic compounds, carbonyls and acids) Application activity on Toluene to help students prepare for unified paper Electrophillic substitution assessment (with answers) Specification points covered: Aromatic compounds, carbonyls and acids Benzene and aromatic compounds Electrophilic substitution Phenols Carbonyl compounds Reactions of carbonyl compounds Characteristic tests for carbonyl compounds Carboxylic acids and esters Properties of carboxylic acids Esters Acyl chlorides

A 57 mark assessment covering rates, orders and equilibrium from module 5 (OCR A level Chemistry) The self assessment sheet breaks down each question by topic so students can quickly see which topics they are confident in and which topics require further work. I use the self-assessments in a similar way to PLCs and ask the students to keep them in their notes to refer to as a starting point for revision