This is a fully-resourced REVISION lesson that consists of an engaging PowerPoint (87 slides) and associated worksheets that challenge the students on their knowledge of the content of Topic 1 (Lifestyle, Health and Risk) of the Edexcel A-Level Biology A (Salters-Nuffield) specification. A wide range of activities have been written into the lesson to maintain motivation and these tasks include exam questions (with answers), understanding checks, differentiated tasks and quiz competitions. The lesson has been designed to include as much which of the content from topic 1, but the following specification points have been given particular attention: The differences between monosaccharides, disaccharides and polysaccharides, including glycogen and starch (amylose and amylopectin). Be able to relate the structures of monosaccharides, disaccharides and polysaccharides to their roles in providing and storing energy Know how monosaccharides join to form disaccharides (sucrose, lactose and maltose) and polysaccharides (glycogen and amylose) through condensation reactions forming glycosidic bonds, and how these can be split through hydrolysis reactions. Know how a triglyceride is synthesised by the formation of ester bonds during condensation reactions between glycerol and three fatty acids. Understand the course of events that leads to atherosclerosis Know how factors such as genetics, diet, age, gender, high blood pressure, smoking and inactivity increase the risk of cardiovascular disease Know the benefits and risks of treatments for CVD Understand the blood-clotting process and its role in CVD Understand how the structures of arteries and veins) relate to their functions. Understand the importance of water as a solvent in transport, including its dipole nature. This lesson can be used at numerous points over the duration of the course, as an end of topic revision aid, in the lead up to the mocks or in the lead up to the actual A-level exams.

A fully resourced revision lesson that uses a combination of exam questions, understanding checks, quick tasks and quiz competitions to help the students to assess their understanding of the topics found within TOPIC 9 (Chemistry of the atmosphere) of the AQA GCSE Chemistry specification (specification point C4.9). The topics that are tested within the lesson include: The proportion of different gases in the atmosphere The Earth’s early atmosphere Greenhouse gases Atmospheric pollutants Students will be engaged through the numerous quiz rounds whilst crucially being able to recognise those areas which require further attention

A fully resourced lesson, which includes differentiated worksheets, and guides the students through the process of extracting aluminium. There are close links throughout the lesson to the reactivity series and electrolysis so that the students are able to understand how the knowledge of all of these is brought together. Students will meet cryolite and recognise why this is used in the process and will finish off by writing half equations to show the products at the electrodes. This lesson has been designed for GCSE students (14 - 16 year olds in the UK)

An engaging lesson which looks at the properties of the Transition metals of the Periodic Table and ultimately compares these properties against other metals, such as the Alkali metals. Through the use of a range of motivating tasks and quiz competitions, students will learn that the transition metals form coloured compounds, have a number of ion charges, act as catalysts and are harder, stronger but less reactive than group 1. This lesson has been written for GCSE students (14 - 16 year olds) but is suitable for younger students who are looking at the patterns and trends in the Periodic Table

A resourced lesson which uses a concise lesson presentation (18 slides) and a differentiated diagram to guide students through the method of blood clotting. This lesson has been designed for students studying GCSE (14 - 16 year olds in the UK) and this is reflected in the appropriate detail where only the involvement of fibrin needs to be known. Students are shown how blood clotting is a cascade effect where one event leads on to the next.

This is a detailed and engaging lesson presentation which focuses on the properties of the elements found in group 1 of the Periodic Table, the alkali metals. Students are challenged throughout the lesson to be able to link their observations of the reactions to the properties. Once they have learnt that the reactivity increases as they move down the group, time is taken to go over this in detail so that students can explain why sodium is more reactive than lithium (and so on) in terms of electron configuration. Progress checks are embedded throughout the lesson so that students have the opportunity to assess their understanding. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but is suitable for younger students who may be carrying out a project on the Periodic Table

A fully-resourced lesson that looks at the topic of osmosis and how the movement of water between a cell and the solution can affect the appearance of an animal and a plant cell. This lesson includes a detailed and engaging lesson presentation (42 slides) and differentiated worksheets that include exam questions that can be set as homework. There is a lot of key terminology associated with this topic and time is taken to ensure that students understand the meaning of each of these terms before moving forwards. Students are introduced to the different types of solutions and then a step-by-step guide is used to show them how to compare the water potential of the solution and the cell and then how this will determine which was water moves. The main task is differentiated so that students are challenged and can access the work. This lesson has been designed for GCSE students (14 - 16 year olds in the UK) but is also suitable for A-level students

A thought-provoking lesson presentation (34 slides) that looks at each of the stages in the development of drugs and considers the potential issues that arise at each of the stages. The lesson begins by ensuring that the students know the scientific definition of a drug and then they will be told how much is spent by the NHS alone each year on medicinal drugs so they can recognise the importance of this topic. Moving forwards, each stage in the development is considered in the appropriate detail. Students are challenged to consider some stages from both a scientific angle and a business angle so they can understand why certain animals are chosen for the testing. Key terms such as placebo and double blind trial are introduced and discussion time is written into the lesson so that insightful questions can be posed by all. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been written for GCSE students but could be used with KS3 students who might be carrying out research or a project on the topic of drugs.

A fully-resourced lesson which guides students through using moles to calculate the mass of a substance in a reaction. The lesson includes a detailed lesson presentation (22 slides) and associated worksheets which are used to check the skills and understanding of the students. The lesson begins by introducing the students to the three steps involved in a calculating mass question. These skills include calculating the relative formula mass and identifying molar ratios in equations to calculate amounts so time is taken to recap on how this is done before students are given the opportunity to try some progress check questions. A worked example brings these three steps together to guide the students to the final answer. The final task involves 4 questions where students are challenged to apply their new-found knowledge. This lesson has been written for GCSE students (14 - 16 year olds in the UK)

A fully-resourced lesson which guides students through drawing, writing and recognising the electronic configurations of atoms and ions. The lesson includes an engaging lesson presentation (33 slides), an associated worksheet and a competition worksheet. The lesson begins by introducing the students to the number of electrons that can be held on the first three electron shells. They are then shown how to draw an electronic configuration and write this in brackets form. Students are given the opportunity to apply this knowledge by drawing the configuration of first 20 elements of the Periodic Table. Moving forwards, students are guided to enable them to discover how the electron configuration is linked to the position of an atom in the Periodic Table. The remainder of the lesson focuses on ions and how the configuration of these substances can be recognised. Some time is taken to explain how ions are formed from atoms and the lesson finishes with a competition which challenges students to identify atoms or ions from their configurations to form a word. There are regular progress checks throughout the lesson to allow the students to check on their understanding and a range of quiz competitions to maintain engagement. This lesson has been written for GCSE students but could be used with younger students, especially the initial part of the lesson on atoms and the link to the Periodic Table

A concise lesson presentation (21 slides) which uses a range of methods to allow students to discover how to draw dot and cross diagrams for covalent structures. The lesson begins by challenging the students to recall their knowledge of electronic structure to show the outer shell of two specified atoms. They will then see how it is possible for both of these atoms to get full outer shells by sharing as happens in this type of bonding. A few more examples are used to consolidate this understanding before quick competition is used to check the understanding so far. Moving forwards, a step by step guide shows students how to draw dot and cross diagrams using the same techniques as was utilised with the hulas. This lesson has been written for GCSE students but could be used with higher ability KS3 students.

A fully-resourced lesson which explores how ions are formed from atoms. The lesson includes an engaging lesson presentation (33 slides) and an associated worksheet to be used during an understanding check. The first part of the lesson focuses on atoms and specifically on getting students to recall that they contains the same number of protons and electrons and this is why they have no charge. By ensuring that they are confident with this fact, they will be able to understand why ions have a charge. Students will learn that ions have full outer shells of electrons and this change in the number of this sub-atomic particle leads to the charge. They are shown examples with aluminium and oxygen and then challenged to apply this new-found knowledge to a task where they have to explain how group 1, 2, 5 and 7 atoms become ions. The final part of the lesson looks at how ion knowledge can be assessed in a question as they have to recognise the electron configuration of one and describe how many sub-atomic particles are found in different examples. There are regular progress checks throughout the lesson to allow the students to check on their understanding. This lesson has been written for GCSE students but could be used with higher ability KS3 students who are looking to extend their knowledge past basic atomic structure

An informative lesson presentation (44 slides) that looks at the work of the key Scientists involved in the development of the atomic model. Dalton, Thomson, Rutherford and Bohr were four men whose work has led to the changes in the atomic model over the years and this lesson looks at parts of each of their work. There is a focus on Rutherford’s work with the alpha particles and students are challenged to draw conclusions based on the deflections they are shown. There is lots of time written into the lesson for consolidation and regular progress checks ensure that students have the opportunity to assess their understanding. This lesson has been written for GCSE students but could be used with KS3 students who perhaps are carrying out a project on the atom and want to add detail to their work

A concise lesson presentation (22 slides) and question worksheet, which together focus on the challenge of applying the equations of motion to calculation questions. Students are given this equation on the data sheet in the exam - therefore, this lesson shows them how they will be expected to rearrange in it four ways. For this reason, the start of the lesson revisits the skills involved in rearranging the formula, beginning with simple tasks and building up to those that involve indices as are found in this equation. Once students have practised these skills, they are challenged to answer 4 questions, although 1 is done together with the class to visualise how to set out the working. This lesson has been designed for GCSE students

A detailed lesson presentation and associated question worksheet which uses a step by step guide and numerous worked examples to show students how to draw genetic crosses to calculate offspring percentages. Before students are able to draw genetic diagrams, they need to understand and be able to use genetic terminology so this is the focus for the start of the lesson. Time is taken to go over the meaning of dominant and recessive alleles, genotypes and phenotypes. Moving forwards, students will be challenged to link genotypes to phenotypes for both dominant and recessive disorders and common misconceptions such as carriers in recessive disorders are explained. Finally, a 5 step guide is used to walk students through drawing genetic diagrams. Students are then given a chance to apply their new-found knowledge to questions about the inheritance of cystic fibrosis and polydactyly. Progress checks have been written into the lesson at regular intervals so that students can assess their understanding. This lesson has been designed for GCSE students but is perfectly suitable for A-level students who are studying the topic of monogenic inheritance

An engaging and informative lesson presentation (40 slides) that looks at the different steps that have to be taken when trying to identify potential donors for organ transplants. Links are made throughout the lesson to related topics such as the human defence systems and blood groups. The lesson begins by challenging the students to use their knowledge of the body’s defences to explain why closely matching tissues is critical when choosing a donor. Moving forwards, students will see how the four blood groups in the ABO system need to receive certain bloods and can only be given to certain others. There is a brief discussion of the HLA antigens and why this needs to be matched. The remainder of the lesson focuses on immuno-suppressant drugs and the advantages and disadvantages to individuals of taking these drugs. Progress checks have been written into the lesson at regular intervals to allow the students to constantly assess their understanding and any misconceptions to be addressed. This lesson has been written for GCSE students

An engaging lesson presentation (34), accompanied by a summary worksheet, which together explore the factors which change the rate of transpiration and focuses on the explanation behind each factor. The lesson begins by introducing the term, transpiration, and linking this to the structure of a leaf to ensure that students know that water is lost as water vapour out of the stomata. Students are provided with an analogy of plants being like clothes on a washing line to challenge them to come up with some of the factors involved. Time is taken to look specifically at humidity as this is a factor which is commonly misunderstood. Moving forwards, students are challenged to draw sketch graphs to predict whether increasing each of these factors will increase the rate of transpiration or decrease it. A series of questions to lead to answers is used to show the students how to explain the effect of increasing the light intensity. The remainder of the lesson looks at a potometer and how it can be used to calculate the rate. The mathematical skills of the students are challenged during a range of tasks and then linked back to the Science so they can recognise which features of plants will help to reduce water loss. Progress checks are written into this lesson at regular intervals to allow students to assess their understanding and a number of quick competitions act to maintain engagement. This lesson has been written for GCSE students but is suitable for A-level students who are studying the plants topic

An informative lesson which guides students through the commonly misunderstood topic of drawing free body diagrams and using them to calculate resultant forces. The lesson begins by ensuring that students understand that force is a vector quantity and therefore arrows in diagrams can be used to show the magnitude and direction. Drawing free body diagrams is poorly understood and therefore time is taken to go through the three key steps in drawing these diagrams. Each of these steps is demonstrated in a number of examples, so students are able to visualise how to construct the diagrams before they are given the opportunity to apply their new-found knowledge. The rest of the lesson focuses on calculating resultant forces when the forces act in the same plane and also when they are at angles to each other. Again, worked examples are shown before students are challenged to apply. Progress checks are written into the lesson at regular intervals so that students can constantly assess their understanding and any misconceptions can be addressed. This lesson has been designed for GCSE students

A fully-resourced lesson which includes a concise lesson presentation (16 slides) and accompanying worksheet that guides students through the use of the gravitational potential energy equation to calculate energy, mass and height. The lesson begins by challenging students to work out the factors involved in calculating gravitational potential energy having been given a scenario with some balls on shelves. The students will discover that mass and height affect the energy size and that a third factor, gravity constant, is involved. The rest of the lesson focuses on using the equation to calculate energy, mass and height. In terms of the latter, students have to carry out an engaging task to work out the height that three flags have to be hoisted to during a medal ceremony. This lesson has been written for GCSE students.

A fully-resourced lesson which focuses on using the kinetic energy equation to calculate energy, mass and speed. The lesson includes a lesson presentation (23 slides) which guides students through the range of calculations and accompanying worksheets which are differentiated. The lesson begins with the students being drip fed the equation so they are clear on the different factors involved. They are challenged to predict whether increasing the mass or increasing the speed will have a greater effect on the kinetic energy before testing their mathematical skills to get results to support their prediction. Moving forwards, students are shown how to rearrange the equation to make the mass the subject of the formula so they can use their skills when asked to calculate the speed. The final task of the lesson brings all of the learning together to tackle a set of questions of increasing difficulty. These questions have been differentiated so that students who need extra assistance can still access the learning. This lesson has been written for GCSE students