This lesson is designed for the NEW AQA Physics GCSE, particularly the ‘Radioactivity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a recap of the three main types of radiation: alpha, beta and gamma radiation. Students will firstly be asked to draw and label a diagram to show how each of these types of radiation can be stopped. Students will then be given some information about the penetrating power of these three types of radiation, using the information and their own knowledge students will need to complete a summary worksheet. Once this has been completed students can self-assess their work using the mark scheme provided. The next part of the lesson will focus on the dangers of radiation, firstly students will be shown a teacher/technician demonstration of the different types of radiation, outlining some of the dangers and precautions taken when handling radioactive sources. Students can complete a table of information on the relative dangers of these radioactive sources whilst watching the demo. This work can self-assessed against the mark scheme provided once it is complete. Next, pupils are asked to ‘Think > Pair > Share’ ideas about how scientists/workers can protect themselves against the hazards of ionising radiation. After a short class discussion the answers can be revealed for students to check their work and take extra notes if necessary. Lastly, students are asked to think about the uses of radiation, they will be given a list and they will need to determine which are real uses of radiation. The real uses of alpha, beta and gamma radiation can then be revealed on the PowerPoint presentation - students can check their answers and take notes on extra uses. The plenary task is for students to talk to the person next to them for one minute about what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins with a video and a set of questions which pupils will need to answer about extinction and try and come up with a definition for this term. Once completed pupils can check their work against the answers provided on the PowerPoint. The next activity is for pupils to think > pair > share ideas about the sorts of changes that might occur within an organisms environment to bring about extinction. Pupils can discuss with their partner and create a mind map of their ideas in their books. Once pupils have completed this you can reveal some of the reasons for environmental change on the PowerPoint slide and pupils can check what they have got against the answers, adding in any they didn’t manage to get. The next activity is for pupils to read some cards of information about the causes of extinction, pupils can work in pairs or groups to read through these causes and summarise each one in their books. To put thees causes into context, the next activity is for pupils to look at examples of organisms which are at the brink of extinction and the reasons why. Pupils will be given a set of cards with information about a range of animal and plant organisms which are at different stages on the IUCN red list. Pupils will need to complete a table of information to describe the habitat and reasons why four of these organisms are endangered. The last part of the lesson will focus on mass extinctions, pupils will watch a video and answer questions about the causes and repercussion of mass extinction events. Once completed pupils can mark their work against the assessment criteria. The plenary activity is for pupils to pretend they are a conservationist campaigning to protect an organism of their choice, they need to write a twitter message to their followers to raise awareness of the factors which may be critically affecting the organism. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a ‘Think > Pair > Share’ task, students are asked to consider how to define ‘competition’. After a short discussion, the correct definition will then be revealed so students can take notes of this in their books. Next, students will be given a set of resources which animals/plants compete for, students will be asked to sort these resources into columns, either those that animals compete for, those that plants compete for or those that both animals and plants compete for. Once this task has been compelted, students can self-assess their work using the mark scheme provided. Next, students will watch a set of videos on competition between animals and plants, whilst watching the video they will need to complete a table for information to include - a resource - how organisms are competing for this resource - an explanation of how it is competing for the resource successfully. The work students have completed at the beginning of the lesson can then be summarised by a fill-in-the-blank activity, students should complete this in their books and it can then be marked and assessed using the answers provided. The second part of the lesson will focus on adaptations, students will firstly watch a video on adaptations, whilst watching the video they can answer a set of questions. The answers to these questions are included so students can assess their work once it is complete. Lastly, students will read through information stations around the room, which list adaptations of organisms which live in colder climates, warmer climates and dry climates. Students will need to complete a worksheet using these information sheets. The plenary activity requires students to come up with a set of three quiz questions to assess students knowledge of what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the B2 1.3 unit on Adaptation & Inheritance. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with a ‘Think > Pair > Share’ activity which requires students to consider the definition for the term ‘evolution’. After students have had some time to talk about this, their ideas can be shared with the class and the answer can be revealed for students to check and correct their work. This leads into an introduction to the fossil record as means of evidence for evolution, students will then need watch a video on the formation of fossils - during which they will answer a set of questions. Students can now mark and assess their work using the mark scheme provided. Students will now be introduced to the idea of ‘Natural Selection’, they will be told the mechanism by which this works by using the example of girraffes with longer and shorter necks. Students will now be asked to complete a cartoon strip to summarise this process, once this task has been completed students will be able to mark and assess their work using the answers provided in the PowerPoint presentation. The last part of the lesson students will be shown a video on examples of natural selection in action. Whilst watching this video, students will need to answer a set of questions, once this has been completed students can self-assess their work using the answers provided. The plenary task requires students to write three quiz questions to test their peers on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with an introduction to resistance, students are provided with a definition which they can write down in their books, as well as a diagram to depict what happens to electrons as they flow around the metal wires within a circuit. Students will then complete a ‘copy-and-complete’ task, this can be marked using the mark scheme provided. Students are now asked to ‘Think > Pair > Share’ their ideas about whether the thickness of the wire would affect the resistance of the wire. Students will discuss their ideas with their peers, share their ideas with the class and then watch a video to find out the answer. Students can then summarise their findings in their books by completing a fill-in-the-blank task, this can then be self-assessed once complete. Students will now be introduced to Ohm’s law, which links the resistance of a component to the current running through it and potential difference across it. Students will be given an equation triangle, they can copy this down into their books and use this to complete the set of problems on the next slide. This work can be marked and corrected once complete. Lastly, students are asked to ‘Think > Pair > Share’ their ideas about which materials are good conductors and insulators. Students can discuss their ideas and write them down into their books, answers are then revealed for students to check their work against. The last assessment task is a ‘Copy and correct’ task, students are given a paragraph of information which they will need to copy and correct the mistakes as they go. Once complete, this can be marked using the mark scheme provided. The plenary task is a choice of two tasks - to summarise what students have learned in three sentences or to write a definition for a set of key words. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the P2 1.1 unit on ‘Electricity & Magnetism’. The lesson begins with an introduction to electromagnets, students are shown a diagram of an electromagnet and told how an electromagnet is made; students can make a note of these details in their books. This follows into a video, students will watch the video and whilst watching will be given a series of questions to answer. Once this task is complete, students can then self-assess their work against the mark scheme that is provided. Students will now be asked to consider what might affect the strength of an electromagnet, students can be given a few minutes to come up with their ideas in pairs before feeding back into a class discussion. Students will now complete an investigation into whether the following two factors - number of coils of wire & voltage - will affect the strength of an electromagnet. Students should follow the instructions provided on the PowerPoint presentation and complete the table of results in their books. Once the investigation has been completed, students will complete a ‘Quick Check’ task in their books to assess their knowledge of what they have learned this lesson. The mark scheme for this is included for students to self-assess their work once it is complete. Lastly, students will complete a ‘Copy and Correct’ task whereby students will need to copy a paragraph of information into their books, correcting any of the information that they seem to be erroneous. This task can also be checked against the answers provided on the PowerPoint presentation. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed to meet specification points for the NEW AQA Trilogy GCSE Biology 'Organisation' SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy Biology, Chemistry and Physics specifications please visit my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly be introduced to guard cells and stomata and how they are able t control the loss of water from the plant, diagrams of guard cells turgid and flaccid will help with this description. Pupils will then be given a set of questions which they will complete using a video, once completed pupils can then assess their work using the answers provided. The next slide shows the process of transpiration, pupils are shown a diagram and then descriptions of each stage in the transpiration process are shown stage by stage. You may need lower ability pupils to copy the stages up off the board in note form first. For higher ability pupils after you have gone through it a couple of times you can move the slide forward and pupils will need to write a description of the process of transpiration using the list of key words and diagram as a cue. After this has been completed pupils will then focus on the factors affecting the rate of transpiration, pupils will each be given a slip of information about a factor and how it affects the loss of water from the plant. Pupils will need to swap information with those around them to complete their table. If pupils do not quite finish this task they can assess their work using the completed table provided in the PowerPoint. The last activity is for pupils to complete exam questions on the topic of the lesson. Pupils will be given 6 minutes as it is worth 6 marks, they should try and complete the question in silence at the back of their books if possible. The plenary task is for pupils to write down 6 key words from the lesson. All resources are included in the PowerPoint slides, please let me know if you have any questions in the comments section and leave feedback if you download and use :) thanks!

This lesson is designed for the NEW AQA Trilogy Physics GCSE, particularly the 'Electricity’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with an introduction to the differences between alternating and direct current, demonstrate with a diagram and a video. Students will then watch another video, using which they will answer a set of questions about alternating current, direct current and the use of oscilloscopes. Once this task has been completed students can self-assess their work using the mark scheme provided in the power point presentation. The next task will require pupils to read a set of information about wiring within three-pin plugs before sketching a diagram of the plug and completing a table to summarise the colour and roles of the live, neutral and earth wires. Again, this work can be self-assessed using the mark scheme provided. Students will then need to sketch a diagram of an oscilloscope trace from an a.c. and d.c. supply and provide some notes about what these two traces are showing us. The next part of the lesson will focus on the National Grid, firstly students will observe a simplified diagram of the route taken by an electric current from the power station to people’s homes, this route involves the electric current passing through a step-up and step-down transformer. Students will need to watch a video and then summarise the role of these two types of transformers. This task can be self-assessed against the answer provided in the PowerPoint presentation. Next, the PowerPoint presentation explains why it is important to keep the voltage in the overhead cables very high and the current very low - to reduce resistance. Students will then need to complete a fill-in-the-blank task to sum up the main points about the National Grid. The last part of the lesson will require pupils to observe oscilloscope traces for different a.c. supplies, firstly they will be shown how to work out the period, they will need to apply this to each oscilloscope trace. Then using the period, they will need to calculate the frequency for each trace - making sure they show all their working! Once this task is complete pupils can self or peer assess their work using the mark scheme provided. The plenary task is an exit card, students are asked to write down three facts they have learned during the lesson, five key words and one question to test their peers knowledge. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the KS3 Year 8 Science course, specifically the C2 1.3 unit on ‘Separation Techniques. More Biology, Chemistry and Physics resources can be found in my TES Shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, students are asked to describe what happens when salt is mixed with water, using the particle model to help them with their explanation. After a short discussion, a diagram is revealed to show students what happens when more and more salt is added to water, eventually reaching a saturated solution. Students will now be provided with a definition for ‘solubility’, following this students will complete a task whereby they will match the key word to the correct definition. Students can self-assess their work once this is complete. Next, students will complete an investigation to work out how much sugar can be dissolved in 100g of water - an equipment list and method is provided for students to follow. Students will now be given some data on the solubility of two salt compounds - potassium chloride and sodium chloride - as temperature increases from 0-100 degrees celsius. They will be required to draw a graph to display this data and describe the relationship between temperature and solubility. This work can be self-assessed once it is complete, using the mark scheme provided. Lastly, students will complete a ‘copy and correct’ task where they will need to copy a paragraph into their books and make amendments so that it correctly summarises what students have learned this lesson. The plenary task is a 3-3-1 reduction, students will need to write down three facts, three key words and 1 question to test their peers knowledge of what was learned this lesson. All resources are included at the end of the presentation, thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The first part of this lesson focuses on biodiversity, pupils will watch a video and have to answer questions whilst watching the video. Once complete pupils can self-assess their work using the answers provided in the PowerPoint. The next slide shows a graph depicting the human population growth in the last 8000 years and information describing the effect this is having on our planet. The next part of the lesson focuses on human impacts on biodiversity. Firstly pupils will need to come up with a mind map of all the ways in which humans use the land. As an extension task pupils can also discuss what impact this may be having on our environment. Some key ideas will then be gone through using information provided on the PowerPoint. Pupils will then watch a video on human impacts on biodiversity, using the information in the video they will need to answer a set of questions. Once this task is complete pupils can self-assess their work using the answers provided. The next task focuses on waste produced from human activities, each pupil will be given a card of information on a specific pollutant and the effect it has on the environment. Pupils will need to walk around the room trading information in order to complete a table of information on these pollutants. The very last task is an exam-style question, higher tier pupils can complete this question in the back of their books without looking at their notes from the lesson. Once completed pupils can assess their work using the mark scheme provided. The plenary task is for pupils to write 3 facts, 2 key words and 1 question on what they have learned this lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Ecology’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils are firstly asked to come up with a food chain for humans eating rice, then humans eating chickens and to consider the differences in energy efficiency between the two. This then leads onto the second slide which explains how shorter food chains mean more efficient food production. The second task is for pupils to think > pair > share ideas about methods farmers could employ to ensure animals gain new biomass at an efficient rate. Once pupils have written their ideas down in their books the answers can be revealed on the PowerPoint, students can check their work against the answers and correct anything they need to. The methods listed on the PowerPoint have disadvantages, pupils should then have a short discussion in pairs of what these negatives are before they are revealed. The next part of the lesson focuses on fish stocks, students are given some information and are asked to consider how we might sustainably manage fish stocks. Once students have some to discuss as groups and then as a class, pupils are given a set of questions they will need to answer whilst watching a video. Once this is complete students can self-assess their work. The last part of the lesson focuses on biotechnology in food production. Students will be given some information sheet in their groups and should use this information to answer a set of questions, once pupils have completed these questions they can self or peer-assess their work using the mark scheme provided. The very last task may be more suited to higher-ability classes. Pupils will be given a set of jumbled up sentences, students need to place the sentences in the correct order to describe the process of making mycoprotein, students can assess their work once complete. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the ‘Earth’s Atmosphere’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins by looking at the percentage of different gases in our atmosphere today compared to 3 billions years ago, this then follows into a task whereby pupils will need to walk around the room to read information posters on the evolution of our atmosphere. Using the information they will need to complete a set of questions, this work can be self-assessed using the mark scheme provided. The next part of the lesson focuses on theories of how life evolved on Earth, to begin with students need to ‘Think > Pair > Share’ their ideas about the conditions needed for life on Earth. Once this has been discussed as a class, some of the factors can be revealed on the PowerPoint presentation and one of the theories of how life evolved is outlined, using an animation. Pupils will now complete a mid-lesson progress check, this task can be self-assessed once complete. The next task requires pupils to construct a time-line of events outlining the history of the evolution of the Earth’s atmosphere and life on on Earth given the information they have learned so far this lesson. Pupils can self/peer assess their work using the mark scheme provided in the PowerPoint. The final task is for pupils to discuss their ideas about how carbon dioxide levels decreased so dramatically from being the majority of the Earth’s atmosphere to now only 0.04%. Pupils can mind map their ideas, before the answers are revealed using the PowerPoint. The plenary task is for pupils to complete a 3-2-1 of what they have learned during the lesson - 3 facts, 2 key words and 1 question. All resources are included within the PowerPoint presentation, if you have any questions please email me at swift.education.uk@gmail.com. Any feedback would be greatly appreciated :) Thanks!

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 B1.3 Module on ‘Reproduction’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. The lesson begins with an introduction to the definition for ‘gestation’ - students are then asked to match the mammal to the correct gestation period length, from the selection provided. This task can be marked once it is complete. Students are then asked to consider the advice that a midwife might give to a pregnant woman, regarding her health and her baby’s health. After a few minutes of partner discussion, students can feed back to a class discussion where hopefully factors such as diet, alcohol consumption and smoking are mentioned. During the next part of the lesson, students will need to walk around the room reading posters of information on the development of a fetus inside the uterus. Students will need to complete a worksheet using this information, the mark scheme for this task is included in the PowerPoint so students can self-assess their work or peer-assess their work once the task is complete. The last activity is a ‘Human Bingo’ task, each student is given the same grid - each box of the grid contains a different question. Students need to walk around the room and get a different student to answer each of the different questions on the grid - once complete they can sit down and shout ‘Bingo!’. The plenary task requires students to come up with five questions for the five answers that are provided on the PowerPoint. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the Activate KS3 Science Course, specifically Year 7 C4 ’Acids & Alkalis’. For more lessons designed for KS3 and KS4 please visit my shop at: https://www.tes.com/teaching-resources/shop/SWiftScience. This lesson starts with a question for students to consider, two ideas are presented to them - one student suggests that we could taste the unknown contents of two beakers to determine if it’s an acid/alkali whereas the other students suggests this is dangerous and we should use a chemical indicator instead. Students should discuss their ideas about who is right and feedback to a class discussion. This leads into an introduction to chemical indicators such as litmus paper and universal indicator. Students will now watch a video on the use of litmus paper, whilst watching the video students will need to fill in the blanks on the table provided. This work can then be self-assessed using the mark scheme provided. Next, students will summarise what they have learned so far by completing a fill-in-the-blank task, this also can be marked and corrected using the answers provided on the PowerPoint. The next activity requires students to read a piece of information on indicators & pH, using this information students will need to answer a set of questions. This task can be marked using the mark scheme provided on the PowerPoint. Students can now complete an investigation, using universal indicator to determine the pH and acidity/alkalinity of different substances. Students can use the practical sheet to conduct this practical, recording their results in an appropriate table. The final task is a literacy check, students will need to link groups of words together in a sentence to summarise what they have learned this lesson. The plenary task requires students to write a Whatsapp message telling them what they have learned in the lesson. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson begins by students considering in pairs/groups the names of different methods of contraception they have already heard of, they can create a mind map in their book which can then be checked against the list provided. Pupils will then watch a video which runs through some of the types of contraception out there and their pro’s and con’s, pupils will need to watch the video and note down as many advantages and disadvantages of these methods of contraception as they can. This task can be self-assessed using the answers provided. In the next activity pupils will be given a card sort in pairs or in groups, they will need to read through the information on methods of contraception and complete a table to summarise how these methods work or prevent pregnancy as well as their advantages and disadvantages. The next part of the lesson looks at the history of contraception, pupils will watch a video about Margaret Sanger - a progressive nurse in New York during the early 20th century. They will need to answer questions whilst watching the video, once finished their answers can be checked against the mark scheme provided. The final task is a ‘quick check -silent 5’ task, pupils will need to answer the summary questions about what they have learnt this lesson into their books. The plenary activity is for pupils to summarise what they have learnt this lesson in three sentences, using the list of key words that have been provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Homeostasis’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience This lesson starts by pupils discussing what they think might be some differences between primary and secondary sexual characteristics in males and females. Once they have brainstormed their ideas and you have carried out a short classroom discussion you can identify the differences between these two sets of characteristics. The next slide provides students with a long list of statements describing secondary sexual characteristics of both males and females, pupils will need to sort the statements into two columns - male female - some will go into both. Once finished pupils can assess their work using the answers. Now pupils will look at the structures found in both male and female reproductive systems and the roles they play. Pupils will be shown a diagram to demonstrate these parts and then pupils will be given a blank worksheet and a set of jumbled statements, they will need to match the structures to the correct part on their diagram. This work can then be assessed to check they have correctly matched the organs and functions. Pupils will now watch a video introducing the menstrual cycle, using the video pupils will need to try and write a describe the roles each of the female hormones - oestrogen, progesterone, FSH, LH - plays in the menstrual cycle. If pupils weren’t able to get down a detailed answer they can mark and correct their work using answers provided. The final activity is an exam-style question, along with the mark scheme to check their work. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Biology GCSE, particularly the ‘Inheritance, variation and evolution’ SoW for the higher tier, biology only specification. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience Pupils will firstly be given, in pairs, information about Lamarck’s and Darwin’s theories of evolution. In pairs students will need to explain each theory to each other and discuss the merits and downfalls of each. The next task required pupils to summarise the main points of each of the scientists theories in a table, this work can be self-assessed against the answers provided. Pupils will then be asked to consider the flaws in Lamarck’s theory, pupils will be asked to come up with a question to ask Lamarck about his theory and to discuss in pairs what they think the potential flaws of this theory could be. Once you have gone through pupils’ ideas as a class you can reveal some of the problems with this theory of evolution. The next part of the lesson focuses on Darwin, firstly pupils will be asked to copy and complete sentences to summarise the main ideas from Darwin’s theory of evolution. Once this task is completed and marked, pupils will go on to look at why Darwin’s ideas were not published or accepted straight away. Pupils will be provided with some information but they will also need to use their own knowledge to answer a set of questions provided on a worksheet. Once this task is complete, a detailed mark scheme has been provided for pupils to either self or peer assess their work. The very last task is an exam-style question, pupils will need to complete this in their books (at the back of books without notes for a stretch and challenge) and self or peer-assess using the mark scheme once they have finished. The plenary task is for pupils to summarise what they have learnt in the lesson using the key words provided. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please let me know in the comments section and any feedback would be appreciated :)

This lesson is designed for the NEW AQA Trilogy Chemistry GCSE, particularly the 'Earth’s Resources’ SoW. For more lessons designed to meet specification points for the NEW AQA Trilogy specifications for Biology, Chemistry and Physics please see my shop: https://www.tes.com/teaching-resources/shop/SWiftScience The lesson begins with a ‘Think > Pair > Share’ task, pupils will need to consider the definitions of the terms ‘Finite’ and ‘Renewable’. After a discussion in pairs and as a class, the definitions for these words can be revealed which pupils can write in their books. Next, pupils will watch a video on the availability and sustainable use of Earth’s resources, pupils will need to answer a set of questions whilst watching these videos and can self-assess their work once finished. Pupils are now introduced to a variety of natural resources which are getting used up by the chemical industry, students are given a list of these raw materials and are then asked to consider what factors might determine how quickly they may run out and the uncertainties surrounding estimates of how long they will last. After a discussion pupils can mind map their ideas, before the answers revealed and students can self-assess their work. Next, pupils are shown how to calculate orders of magnitude - the skill is demonstrated and then pupils need to have a go at tackling a problem. The next part of the lesson focuses on renewable resources, some examples of renewable energy sources are introduced and then students need to complete a task whereby they read information about different renewable fuel sources and have to sum up the advantages and disadvantages for each. Students can complete a table of their ideas in their books, this task can be self-assessed using the mark scheme. Finally, pupils complete an exam-style question on this topic and self-assess their work. The plenary task requires pupils to summarise what they have learned in the lesson using one of the sentence starters. All resources are included at the end of the presentation. Thanks for looking, if you have any questions please email me at swift.education.uk@gmail.com and any feedback would be appreciated :)