This is a 10 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Heat Transfers. This includes a mathematical explanation of conduction and qualitative explanations for radiations and convection. This is the first PowerPoint in this section (Thermodynamics) and includes a worked example of conduction using steady rate thermal conductivity.

This is an 11 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of magnetism and solenoids. This PowerPoint includes a description of magnetic strength, magnetic flux density, reluctance, and magnetomotive force. There are several worked examples of the various formulae. This is the first PowerPoint in this section (Magnetism and Electromagnetic induction). v1.01 (Nov 2021 ) - Minor improvements

This is a 14 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topics of Resistors and Resistance. This lesson describes the four main resistor types and applies these to Ohm’s Law. Resistivity calculations are covered which is linked to conductivity. Temperature coefficient of resistance is explained, together with a worked example. Kirschhoff’s laws for voltage and current are also briefly introduced. This is the third PowerPoint in this section (Electricity and circuits).

This is a 10 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Resistors in both series and parallel circuits. This PowerPoint includes circuit diagrams and worked examples of the resistance, current and voltage calculations needed for basic circuits. This is the fifth PowerPoint in this section (Electricity and circuits). v1.01 (18th Nov 2020) - Minor corrections v1.02 (Nov 2021) - Minor improvements

iGCSE - Reflection of light This lesson covers the basics of reflected light, honing in on exam points including the normal and the angles of incidence and reflection. The experiment for reflection of light and a ray box is included, as well as description of specular and diffuse reflections and how to draw diagrams with multiple reflections from surfaces.

iGCSE - Acceleration calculations and graph interpretation This lesson covers the basic calculation of acceleration, and then uses graphs to show calculations using gradients as well as the area under the graph using composite triangles and rectangles. The worksheet is a two page questions sheet (with answer sheet supplied) that goes over the main points covered in the lesson

This is a 9 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of Shear forces which create stress and strain. This then goes on to explain how this relates to the Modulus of Rigidity. A set of questions and answers is included. This is the seconds of three PowerPoints in this series and covers the mathematical and physics for an analysis of Stress and Strain in Engineering materials as applied to bolts and rivets under shearing conditions v1.01 Error in calculation corrected v1.1 Question sheet and answer sheet added v.1.11 (Jan 2023) Minor change to ppt; rewording of worksheet question to make it clearer

This is an 11 slide PowerPoint that covers BTec National Engineering (A-Level equivalent) on the topic of indices. This lesson covers the basic rules for indices (powers) in algebra. There is a worksheet included and answers for the questions. This is the first PowerPoint in this section (Mathematical methods).

This is the first of three lessons that introduce the idea of logarithms The PowerPoint takes students through the difficulties in graphing data of wide ranging numbers and then, using the E-M spectrum and H-R diagrams, shows how log-log graphs can be used to display this data. This is part of the essential mathematics skills needed for A-Level Physics

This is lesson 19.3 Change of State from the latest syllabus and linked to the latest Oxford book (2015) Included here is a powerpoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum links. Everything that you need to teach this lesson. Please also see my Year 1 resources. All of Chapter one is free to sample and the entire 80 powerpoint course and detailed scheme of work is available on TES as well as my bundles of lessons by chapter for Year 2 that work out a lot cheaper. https://www.tes.com/teaching-resource/a-level-physics-complete-year-1-as-scheme-of-work-for-aqa-80-powerpoints-6-required-practicals-11311522

This is lesson 10.4 Energy and Efficiency from the latest syllabus and linked to the latest Oxford book (2015) Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single download here: https://www.tes.com/teaching-resource/a-level-physics-complete-year-1-as-scheme-of-work-for-aqa-80-powerpoints-6-required-practicals-11311522

This is lesson 9.5 Explosions from the latest syllabus and linked to the latest Oxford book (2015) Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single download here: https://www.tes.com/teaching-resource/a-level-physics-complete-year-1-as-scheme-of-work-for-aqa-80-powerpoints-6-required-practicals-11311522

This is lesson 8.4 On the Road from the latest syllabus and linked to the latest Oxford book (2015) Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single download here: https://www.tes.com/teaching-resource/a-level-physics-complete-year-1-as-scheme-of-work-for-aqa-80-powerpoints-6-required-practicals-11311522

This is lesson 8.1 Force and Acceleration from the latest syllabus and linked to the latest Oxford book (2015) Included here is a PowerPoint of this lesson and lesson plan complete with point by point teaching, homework recommendations and curriculum link; everything that you need to teach this lesson. All of Chapter one is free to sample. I am bundling every chapter of the Year 1 and Year 2 course to make them cheaper. The entire 80 PowerPoint course and full scheme of work is also available as a much cheaper single download here: https://www.tes.com/teaching-resource/a-level-physics-complete-year-1-as-scheme-of-work-for-aqa-80-powerpoints-6-required-practicals-11311522 Latest version - 22nd March 2017 (Cover page, worked example slide and summary slide added)

This is the second of three lessons that introduce the idea of logarithms The PowerPoint takes students through the difficulties in solving algebra with unknown powers and cumulative interest. The general simple rules of addition and subtraction of logarithms is discussed. This is part of the essential mathematics skills needed for A-Level Physics