1. Resources Home
  2. Primary
  3. Design, engineering and technology
  4. General design considerations
GCSE Design Resistant Materials Revision Lesson #15: Isometric Drawing A sStudy Guide Exam Questions

GCSE Design Resistant Materials Revision Lesson #15: Isometric Drawing A sStudy Guide Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Isometric Drawing. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 22 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #14: Anthropometrics Study Guide Exam Questions

GCSE Design Resistant Materials Revision Lesson #14: Anthropometrics Study Guide Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Anthropometrics’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 21 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #13: Ergonomics Study Guide Exam Questions

GCSE Design Resistant Materials Revision Lesson #13: Ergonomics Study Guide Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Ergonomics’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 38 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
Mastermind Materials - Graphic Products

Mastermind Materials - Graphic Products

A great revision tool or lesson starter to keep learners engaged. Based on the classic television game show. Can be played as whole class activity. One learner to take the ‘hot seat’ and the PowerPoint presentation is played on the whiteboard. The theme tune is included in the PowerPoint which will pay as the questions are asked. Questions are asked to the learner in the ‘hot seat’ and the learner is given 2 minutes (length of the music) to answer up to 20 questions on materials used in Graphic Products. Each question answered correctly gains one point/mark. Contains a PowerPoint of the questions with audio and question and answer cards for the teacher are provided. Cards are designed to be printed back to back to add to the ‘Game Show’ experiance.
lsshales
RAF 100:  Aiming for awesome - STEM resource

RAF 100: Aiming for awesome - STEM resource

The aim of this resource is to give students the opportunity to investigate the impact of science, technology, engineering and mathematics (STEM) on aircraft design. Topics that can be delivered in your lessons include design and make challenges, the development of numeracy and literacy skills, and support for scientific principles such as: forces, sound and radio waves, and experimental skills and investigation. The aim of the activities in this resource are to develop a better understanding of the ways engineers think and act using engineering habits of mind (EHoM). Each resource is linked to the National Curriculum. Further information about the selection of resources that we provide primary and secondary schools is available on the Schools section of our site. Aircraft design - gives students the opportunity to investigate the impact of STEM on aircraft design. Radar - gives students the opportunity to investigate the impact of STEM on radar technology. Speed record - gives students the opportunity to investigate the impact of STEM on the air speed record. Ejection seat - gives students the opportunity to investigate the impact of STEM on ejection seats. Code breaking - gives students the opportunity to investigate the impact of STEM on code breaking and security. Satellite age - gives students the opportunity to investigate the impact of STEM on satellite communications. Disaster relief - gives students the opportunity to investigate the impact of STEM on delivering humanitarian aid. Logistics challenge - gives students the opportunity to investigate how STEM is used when planning a mission. Remotely piloted air systems - gives students the opportunity to investigate the impact of STEM on the design, production and control of Remotely Piloted Aircraft Systems. Stealth - gives students the opportunity to investigate the impact of STEM on making stealth vehicles
RoyalAcademyofEngineering
Graphics and Graffiti worksheets

Graphics and Graffiti worksheets

GREAT VALUE - save 49% (if resources were bought individually These worksheets are perfect for starter tasks, extention tasks, form time cover work or even as part of a bigger project. Just print out and you are ready to go. Happy Teaching :-)
RND86
Worksheet bundle 1

Worksheet bundle 1

GREAT VALUE - save 48% (if resources were bought individually) These worksheets are perfect for starter tasks, extention tasks, form time cover work or even as part of a bigger project. Just print out and you are ready to go. Happy Teaching :-)
RND86
Year 4 Maths BUNDLE

Year 4 Maths BUNDLE

This resource is a BUNDLE of all of the different strands of the 2014 National Curriculum of England’s Maths objectives for Year 4 in NUMBER & PLACE VALUE; OPERATIONS; FRACTIONS & DECIMALS; MEASUREMENT; AND PROPERTIES OF SHAPE. ADDITIONALLY there are HANDS-ON FRACTION & DECIMAL AND MEASUREMENT PRACTICE WITH FOOD AND PAPER AIRPLANES for children to apply their understanding in context with donuts and lemonade. The pack can be used for reinforcement, in Maths centres for review, Morning Maths work, as well as for home learning tasks.
erinbrasington
Year 4 Maths: Fractions & Decimals

Year 4 Maths: Fractions & Decimals

This resource has been made using the** fractions & decimals objectives for Year 4** from the 2014 National Curriculum of England: Recognise and show, using diagrams, families of common equivalent fractions Count up and down in hundredths; recognise that hundredths arise when dividing an object by one hundred and dividing tenths by ten Solve problems involving increasingly harder fractions to calculate quantities, and fractions to divide quantities, including non-unit fractions where the answer is a whole number Add and subtract fractions with the same denominator Recognise and write decimal equivalents of any number of tenths or hundredths Recognise and write decimal equivalents to ¼, ½, ¾ Find the effect of dividing a one- or two-digit number by 10 and 100, identifying the value of the digits in the answer as ones, tenths and hundredths Round decimals with one decimal place to the nearest whole number Compare number with the same number of decimal places up to two decimal places Solve simple measure and money problems involving fractions and decimals to two decimal places ADDITIONALLY there is HANDS-ON FRACTION AND DECIMAL PRACTICE WITH PIZZA for children to apply their understanding in context with calculating costs and measuring ingredients… The pack can be used for reinforcement, in Maths centres for review, Morning Maths work, as well as for home learning tasks.
erinbrasington
Introduction to Renewable Energy to create a Sustainable City

Introduction to Renewable Energy to create a Sustainable City

This teacher resource helps the teacher to introduce ‘Renewable Energy’. It explains different renewable energies (eg: Wind Energy, Hydropower, Geothermal Energy, Sound Energy…). This unit of work introduces the topic using links to few video clips. At the end of the PPT there is a class task for students to create a sustainable city in a chosen area. The PPT also includes help to create ‘Mood boards’ and ‘Annotated map’ of the chosen area with marking criteria.
hniran
Engineering in the Movies

Engineering in the Movies

Engineering in the Movies allows pupils to explore the creative and practical side of STEM in the movie industry, whilst introducing the important role engineers have in the movie industry. Through 12 engaging activities, pupils will link topics taught in their subject lessons with applications in real world engineering. This resource provides hands-on thematic education opportunities to pupils interested in the magical world of movies that can be taught in the classroom and as an enrichment programme. The resources can be used in sequence, or separately as part of the curriculum, or in STEM clubs. The resources cover a range of topics from the computing, design and technology, mats and science curricula in all the devolved nations at KS2 and KS3.
RoyalAcademyofEngineering
Smart and Modern Materials Card Sort

Smart and Modern Materials Card Sort

A great lesson starter/settler or revision tool. Learners are to match the image of the smart and modern material to the properties and the uses. Cards are designed to be able to be printed back to back and laminated.
lsshales
Moving toy project

Moving toy project

A step by step visual guide to the making of the moving toy project. It comes with a SOW overview and supporting booklet
mrcornwell1985
Sustainability and the KINDER egg

Sustainability and the KINDER egg

How is the Kinder Egg having a negative impact upon the Enviroment. A fun and engaging lesson, Works well when pupils get to handle kinder eggs during the lesson. Good you tube link to manufacturing. Year 11 found this very engaging and useful
mrcornwell1985
12 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

12 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

12 x suggested 1 hour revision lessons on the theme of WOODS and manufactured boards METALS PLASTICS SMART and modern materials COMPONENTS STOCK SIZES WOOD JOINTS ADHESIVES FINISHES HAND TOOLS POWER TOOLS COMPOSITE MATERIALS Powerpoint so can be used on the board or printed as a series of activities and worksheets. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #6: Stock Sizes Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #6: Stock Sizes Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Stock Materials Sizes’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 24 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #5: Components Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #5: Components Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Components’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 34 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #4: Smart & Modern Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #4: Smart & Modern Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Smart & Modern Materials’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 46 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
Task-Primary Design Roald Dahl

Task-Primary Design Roald Dahl

I have uploaded this resource showing an example of the activity. All free, if I could ask you make a small donation to the Samaritans in return but not mandatory.Thanks https://www.samaritans.org/support-us/donate-online/make-single-donation or text FOOD to 70207 (UNICEF) to give a child food .(£3)
68mrbd
Material Properties Card Sort

Material Properties Card Sort

A great lesson starter/settler or revision tool. Learners are to match the property term and the definition. Learners are to also match the property terms to the category (Physical Properties and Working Properties. Cards are designed to be able to be printed back to back and laminated.
lsshales
3 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

3 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

3 x suggested 1 hour revision lessons on the theme of WOODS and Manufactured Boards METALS PLASTICS Powerpoint so can be used on the board or printed as a series of activities and worksheets. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #3: Plastics Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #3: Plastics Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Plastics’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 25 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #2: Metals Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #2: Metals Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Metals’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 30 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #1: Woods Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #1: Woods Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Woods’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 45 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
6 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

6 x 1 hour GCSE Design Resistant Materials Revision Lessons Exam Questions Tools etc

6 x suggested 1 hour revision lessons on the theme of WOOD JOINTS ADHESIVES FINISHES HAND TOOLS POWER TOOLS COMPOSITE MATERIALS Powerpoint so can be used on the board or printed as a series of activities and worksheets. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #7: Wood Joints Study Guide & Exam Questions

GCSE Design Resistant Materials Revision Lesson #7: Wood Joints Study Guide & Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Wood Joints’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 25 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
GCSE Design Resistant Materials Revision Lesson #12: Composite Materials Study Guide Exam Questions

GCSE Design Resistant Materials Revision Lesson #12: Composite Materials Study Guide Exam Questions

A suggested 1 hour revision lesson on the theme of ‘Composite Materials’. Powerpoint so can be used on the board or printed as a series of activities and worksheets. 29 slides in total with some filler simple activities, exam style questions and information slides. I use these as one off lessons for lower school groups or revision-style lessons with upper school groups. Very little preparation needed other than some props and printing the appropriate slides.
mikedean
STEM / Computing / Maths Project Lesson - Engineer a Smartphone - Product Design Challege

STEM / Computing / Maths Project Lesson - Engineer a Smartphone - Product Design Challege

This is an activity lesson I made to promote STEM / Computing / Maths. The activity involves the students working in groups to design, market and calculate costings for their own smartphones. It is a highly engaging activity getting students thinking about the key aspects including engineering decisions, financial calculations and helps develop managerial skills. Content includes choosing components for their phones, branding it, choosing materials, creating scale drawings, creating a promotional poster and presenting back to the class. It could easily be used as a whole year group event in a hall or similar venue, or on a smaller scale in lessons. It was originally pitched for year 9 students, but would be suitable for 8 and 10, and high ability year 7s. Comes with a powerpoint with key instructions, but focuses around the pack of worksheets which I print 2 to a page and give out 1 between 4.
MrWatkins123
New Specification - Design Technology Unit 3

New Specification - Design Technology Unit 3

This is suitable for anyone teaching the New Design & Technology Specification. The multiple choice questionnaires come with the answers in an EXCEL format. If you operate within a G-mail education setting then these forms can be used in a Classroom format and ‘SELF MARK’ with the Flubaroo app. If you have a g-mail I will share the Unit 3 folder with you so it goes directly onto your Google drive. Please e-mail ma.green@hotmail.co.uk Hope you like and use within your lessons! Follow us on twitter @EPA_Technology​
MIKEY1984
New Specification - Design Technology Unit 2

New Specification - Design Technology Unit 2

This is suitable for anyone teaching the new AQA Design & Technology specification. The multiple choice questionnaires come with the answers in an EXCEL format. If you operate within a G-mail education setting then these forms can be used in a Classroom format and ‘SELF MARK’ with the Flubaroo app. If you have a g-mail I will share the Unit 2 folder with you so it goes directly onto your Google drive. Please e-mail ma.green@hotmail.co.uk Hope you like and use within your lessons! Follow us on twitter @EPA_Technology
MIKEY1984
Y7 Transition Project and taster session - Drag Racer

Y7 Transition Project and taster session - Drag Racer

This resource is a highly engaging Y7 transition project that can be used for primary taster sessions. It includes a team workbook and pupils are asked to design and build they own wind powered drag car. Pupil then race them at the end of the session. (the cars are blown along the track by a leaf blower)
leepeachey
Product Designer: Alessi

Product Designer: Alessi

Full lesson that can be used for exam revision or observation. Contains a highly engaging presentation containing videos. The resource also contains a student worksheet, design activities and a graded example. Save yourself the workload
leepeachey
GCSE DT 1 to 9 Theory: SCALES OF PRODUCTION presentation  + Student sheets

GCSE DT 1 to 9 Theory: SCALES OF PRODUCTION presentation + Student sheets

GCSE DT 1 to 9 Theory: SCALES OF PRODUCTION presentation + Student sheets Best Selling GCSE DT 1 to 9 Resources on TES! Complete presentation Includes: Starter One-off Bespoke Production Batch Production Mass Production Just In Time Production Continuous Flow Production Seasonal Production Production in the workshop: Templates, Moulds, formers and Jigs. Differentiated Exam Questions* Student lesson worksheets are interactive and great fun. Can include Diagram Time, Snip’n’ Flip, Word Banks, Starters and more. This is an absolute must for all new DT New Spec teachers and will serve you for years to come! Fully editable with your own school logo and high quality worksheets for students to work through in class and use for revision. GENIUS! Ideal for Key Stage 3 and 4.
fastball1718
5 x design and technology revision pyramids tarsias

5 x design and technology revision pyramids tarsias

5 x design and technology revision tarsias can be printed / laminated / cut and then sort out. Topics of tarsias -Hows it made? Match the picture to how it has been made. -Material properties - Match the property to it’s definition. -The design process - Match the keyword to definition linked to the design process. -Materials - Match the keyword to the definition -Design & Technology keywords - match the keyword to the definition I use these with: KS3 - Mostly more able groups KS4 GCSE Product Design / GCSE Design and technology KS5 - A-Level Design and technology Product (3D) design The size can be altered on these to be printed in A4 or 6
rcteacherdt
Survival Invention BUNDLE (STEAM with Explanation Text)

Survival Invention BUNDLE (STEAM with Explanation Text)

This resource has been designed to be done alongside Kensuke’s Kingdom by Michael Morpurgo, but can also be done independently of the novel study. Children will design survival inventions to withstand the environment of a remote island after a shipwreck. They will investigate different weather patterns in a specified area of the world before deciding on what they will need to survive. Children will be encouraged to use different diagrams (annotated, cross-sectional and exploded) to show their ideas before making and evaluating them. This bundle also includes the Explanation Outcome where children will explain their inventions according to the 2014 National Curriculum English Standards for Year 6. Links provided to digital resources for editing and sharing on Google Classroom and Seesaw.
erinbrasington